error after boot

[wkraus]

Got some errors at the end of the installation that I could not register. Reboot followed without problems but ended with:

cp: error writing '/dev/fb0': No space left on device

running Raspi 4 with 32 GB SSD and Bullseye software original Raspi 7'' display Adalm-Pluto attached but no mouse yet.

Any help ?

[g4eml]

Langstone has not been tested with the Bullseye release or using an SSD. As stated in the installation instructions you need to use Buster Lite.

/dev/fb0 is the display frame buffer. It sounds like they have changed the display format when releasing Bullseye.

Langstone will not also not work correctly without a mouse.

Colin.

On 17 Apr 2022, at 09:44, wkraus @.***> wrote:

Got some errors at the end of the installation that I could not register. Reboot followed without problems but ended with:

cp: error writing '/dev/fb0': No space left on device

running Raspi 4 with 32 GB SSD and Bullseye software original Raspi 7'' display Adalm-Pluto attached but no mouse yet.

Any help ?

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.

[wkraus]

tnx for fast response Colin.

I have installed Buster lite and Langstone seems to work, but still without Pluto and mouse.

Installation worked without any problems.

With Pluto and mouse now Langstone starts, touchscreen works but screen shows:

?????_Rx.py failed to load (message may have been a bit different)

after reboot:

Lang_Tx.py failed to load.

I suppose because I haven't yet a USB sound card connected. SORRY - I will be back soon.

[wkraus]

After having added mouse, Pluto and USB sound card my Langstone starts without problems. Finally, the whole installation was easy going after following all the instructions.

My AD8317 power meter shows nearly the same output as stated.

Great software !!