Closed SkyAndy closed 6 years ago
I tested with a Teensy 3.5 and works good. Could you copy your NAK message?. If you received: "Received a NAK to the SET_CONFIG command from the modem", you need to update your MMDVMHost also. Jonathan added a new parameter to the modem configuration.
No problems here with latest software versions and Teensy 3.2:
$ ./MMDVMHost MMDVM.ini
I: 2017-08-21 07:07:01.527 This software is for use on amateur radio networks only,
I: 2017-08-21 07:07:01.527 it is to be used for educational purposes only. Its use on
I: 2017-08-21 07:07:01.527 commercial networks is strictly prohibited.
I: 2017-08-21 07:07:01.527 Copyright(C) 2015-2017 by Jonathan Naylor, G4KLX and others
M: 2017-08-21 07:07:01.527 MMDVMHost-20170719 is starting
M: 2017-08-21 07:07:01.527 Built 09:04:41 Aug 21 2017 (GitID #0efaf55)
I: 2017-08-21 07:07:01.527 General Parameters
I: 2017-08-21 07:07:01.527 Callsign: G9BF
I: 2017-08-21 07:07:01.527 Id: 123456
I: 2017-08-21 07:07:01.527 Duplex: yes
I: 2017-08-21 07:07:01.527 Timeout: 180s
I: 2017-08-21 07:07:01.527 RF Mode Hang: 10s
I: 2017-08-21 07:07:01.527 Net Mode Hang: 3s
I: 2017-08-21 07:07:01.527 D-Star: enabled
I: 2017-08-21 07:07:01.527 DMR: enabled
I: 2017-08-21 07:07:01.527 YSF: enabled
I: 2017-08-21 07:07:01.527 P25: enabled
I: 2017-08-21 07:07:01.527 Modem Parameters
I: 2017-08-21 07:07:01.527 Port: /dev/ttyACM3
I: 2017-08-21 07:07:01.527 RX Invert: no
I: 2017-08-21 07:07:01.527 TX Invert: yes
I: 2017-08-21 07:07:01.527 PTT Invert: no
I: 2017-08-21 07:07:01.527 TX Delay: 100ms
I: 2017-08-21 07:07:01.527 RX Offset: 0Hz
I: 2017-08-21 07:07:01.527 TX Offset: 0Hz
I: 2017-08-21 07:07:01.527 TX DC Offset: 0
I: 2017-08-21 07:07:01.527 DMR Delay: 0 (0.0ms)
I: 2017-08-21 07:07:01.528 RX Level: 50.0%
I: 2017-08-21 07:07:01.528 CW Id TX Level: 50.0%
I: 2017-08-21 07:07:01.528 D-Star TX Level: 50.0%
I: 2017-08-21 07:07:01.528 DMR TX Level: 50.0%
I: 2017-08-21 07:07:01.528 YSF TX Level: 50.0%
I: 2017-08-21 07:07:01.528 P25 TX Level: 50.0%
I: 2017-08-21 07:07:01.528 RX Frequency: 435000000Hz (435000000Hz)
I: 2017-08-21 07:07:01.528 TX Frequency: 435000000Hz (435000000Hz)
M: 2017-08-21 07:07:01.528 Opening the MMDVM
I: 2017-08-21 07:07:03.543 MMDVM protocol version: 1, description: MMDVM 20170501 TCXO (D-Star/DMR/System Fusion/P25/RSSI/CW Id) (Build: 09:03:07 Aug 21 2017)
I: 2017-08-21 07:07:03.563 Display Parameters
I: 2017-08-21 07:07:03.563 Type: None
I: 2017-08-21 07:07:03.563 D-Star Network Parameters
I: 2017-08-21 07:07:03.563 Gateway Address: 127.0.0.1
I: 2017-08-21 07:07:03.563 Gateway Port: 20010
I: 2017-08-21 07:07:03.563 Local Port: 20011
M: 2017-08-21 07:07:03.563 Opening D-Star network connection
I: 2017-08-21 07:07:03.563 DMR Network Parameters
I: 2017-08-21 07:07:03.563 Address: 44.131.4.1
I: 2017-08-21 07:07:03.563 Port: 62031
I: 2017-08-21 07:07:03.563 Local: random
I: 2017-08-21 07:07:03.563 Jitter: 300ms
I: 2017-08-21 07:07:03.563 Slot 1: enabled
I: 2017-08-21 07:07:03.563 Slot 2: enabled
I: 2017-08-21 07:07:03.563 Info Parameters
I: 2017-08-21 07:07:03.563 Callsign: G9BF
I: 2017-08-21 07:07:03.563 RX Frequency: 435000000Hz
I: 2017-08-21 07:07:03.563 TX Frequency: 435000000Hz
I: 2017-08-21 07:07:03.563 Power: 1W
I: 2017-08-21 07:07:03.563 Latitude: 0.000000deg N
I: 2017-08-21 07:07:03.563 Longitude: 0.000000deg E
I: 2017-08-21 07:07:03.563 Height: 0m
I: 2017-08-21 07:07:03.563 Location: "Nowhere"
I: 2017-08-21 07:07:03.563 Description: "Multi-Mode Repeater"
I: 2017-08-21 07:07:03.563 URL: "www.google.co.uk"
M: 2017-08-21 07:07:03.563 DMR, Opening DMR Network
I: 2017-08-21 07:07:03.564 System Fusion Network Parameters
I: 2017-08-21 07:07:03.564 Local Address: 127.0.0.1
I: 2017-08-21 07:07:03.564 Local Port: 3200
I: 2017-08-21 07:07:03.564 Gateway Address: 127.0.0.1
I: 2017-08-21 07:07:03.564 Gateway Port: 4200
M: 2017-08-21 07:07:03.564 Opening YSF network connection
I: 2017-08-21 07:07:03.564 P25 Network Parameters
I: 2017-08-21 07:07:03.564 Gateway Address: 127.0.0.1
I: 2017-08-21 07:07:03.564 Gateway Port: 42020
I: 2017-08-21 07:07:03.564 Local Port: 32010
M: 2017-08-21 07:07:03.564 Opening P25 network connection
I: 2017-08-21 07:07:03.564 CW Id Parameters
I: 2017-08-21 07:07:03.564 Time: 10 mins
I: 2017-08-21 07:07:03.564 Callsign: G9BF
I: 2017-08-21 07:07:03.564 RSSI
I: 2017-08-21 07:07:03.564 Mapping File: RSSI.dat
I: 2017-08-21 07:07:03.564 Loaded 0 RSSI data mapping points from RSSI.dat
I: 2017-08-21 07:07:03.564 DMR Id Lookups
I: 2017-08-21 07:07:03.564 File: DMRIds.dat
I: 2017-08-21 07:07:03.564 Reload: 24 hours
I: 2017-08-21 07:07:03.616 Loaded 67992 Ids to the callsign lookup table
I: 2017-08-21 07:07:03.616 D-Star Parameters
I: 2017-08-21 07:07:03.616 Started the DMR Id lookup reload thread
I: 2017-08-21 07:07:03.616 Module: C
I: 2017-08-21 07:07:03.616 Self Only: no
I: 2017-08-21 07:07:03.616 Ack Reply: yes
I: 2017-08-21 07:07:03.616 Ack Time: 750ms
I: 2017-08-21 07:07:03.616 Error Reply: yes
I: 2017-08-21 07:07:03.616 DMR Parameters
I: 2017-08-21 07:07:03.616 Id: 123456
I: 2017-08-21 07:07:03.617 Color Code: 1
I: 2017-08-21 07:07:03.617 Self Only: no
I: 2017-08-21 07:07:03.617 Embedded LC Only: no
I: 2017-08-21 07:07:03.617 Dump Talker Alias Data: yes
I: 2017-08-21 07:07:03.617 Prefixes: 0
I: 2017-08-21 07:07:03.617 Call Hang: 3s
I: 2017-08-21 07:07:03.617 TX Hang: 3s
I: 2017-08-21 07:07:03.617 YSF Parameters
I: 2017-08-21 07:07:03.617 Low Deviation: no
I: 2017-08-21 07:07:03.617 Remote Gateway: no
I: 2017-08-21 07:07:03.617 Self Only: no
I: 2017-08-21 07:07:03.618 DSQ: no
I: 2017-08-21 07:07:03.618 P25 Parameters
I: 2017-08-21 07:07:03.618 Id: 123456
I: 2017-08-21 07:07:03.618 NAC: $293
I: 2017-08-21 07:07:03.618 UID Override: no
I: 2017-08-21 07:07:03.618 Self Only: no
M: 2017-08-21 07:07:03.618 MMDVMHost-20170719 is running
NAK-Messages could be reproduced with lastest MMDVMCal-Tool. Here also tested and NAK from MMDVMCal but MMDVMHost running fine best without any messages. Using MMDVM Firmware GitID #5b1075f
works fine after change ini. only MMDVCal tool work not.
Fixed MMDVMCal. Thanks for reporting it.
the last 2 merge does not work on my Teensy 3.6 on MMDVM Teensy V1.1 Bord. only to 8f317fd332992e410a399af47d6244f933edce42 merge Hardware: Teensy 3.6 / 180Mhz / Optimize Faster compiled on: MAC El Capitan with Arduino 1.6.12 (OSX) with Teensyduino 1.36