obj_f4/IOSTM.o] Error 1

[SA7BNT]

Hey, I am trying to flash my MMDVM F446 RE with the latest MMDVM firmware following the instructions at https://github.com/juribeparada/MMDVM_man/blob/master/F446_linux_en.md. However, I am encountering this error while compiling using (make clean / make nucleo).

arm-none-eabi-g++ -Os -fno-exceptions -ffunction-sections -fdata-sections -fno-builtin -fno-rtti -DCUSTOM_NEW -DNO_EXCEPTIONS -c -mcpu=cortex-m4 -mthumb -mlittle-endian -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mthumb-interwork -I. -I./STM32F4XX_Lib/CMSIS/Include/ -I./STM32F4XX_Lib/Device/ -I./STM32F4XX_Lib/STM32F4xx_StdPeriph_Driver/include/ -DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F446xx -DSTM32F4_NUCLEO -DHSE_VALUE=8000000 -DMADEBYMAKEFILE IOSTM.cpp -o obj_f4/IOSTM.o In file included from ./STM32F4XX_Lib/CMSIS/Include/core_cm4.h:189, from ./STM32F4XX_Lib/Device/stm32f4xx.h:734, from Globals.h:23, from IOSTM.cpp:23: ./STM32F4XX_Lib/CMSIS/Include/core_cmFunc.h: In function 'uint32_t __get_PSP()': ./STM32F4XX_Lib/CMSIS/Include/core_cmFunc.h:428:21: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister] 428 | register uint32_t result; | ^~ ./STM32F4XX_Lib/CMSIS/Include/core_cmFunc.h: In function 'uint32_t __get_MSP()': ./STM32F4XX_Lib/CMSIS/Include/core_cmFunc.h:455:21: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister] 455 | register uint32_t result; | ^~ In file included from FM.h:33, from Globals.h:107: FMDirectForm1.h: In member function 'q15_t CFMDirectFormI::filter(q15_t)': FMDirectForm1.h:86:32: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister] 86 | register q31_t out_upscaled = c_b0 * in | ^~~~ IOSTM.cpp: In member function 'void CIO::initInt()': IOSTM.cpp:111:27: error: 'RCC_Per_M17' was not declared in this scope; did you mean 'RCC_Per_LED'? 111 | RCC_AHB1PeriphClockCmd(RCC_Per_M17, ENABLE); | ^~~ | RCC_Per_LED IOSTM.cpp:112:33: error: 'PIN_M17' was not declared in this scope 112 | GPIO_InitStruct.GPIO_Pin = PIN_M17; | ^~~ IOSTM.cpp:114:14: error: 'PORT_M17' was not declared in this scope 114 | GPIO_Init(PORT_M17, &GPIO_InitStruct); | ^~~~ IOSTM.cpp: In member function 'void CIO::setM17Int(bool)': IOSTM.cpp:466:18: error: 'PORT_M17' was not declared in this scope 466 | GPIO_WriteBit(PORT_M17, PIN_M17, on ? Bit_SET : Bit_RESET); | ^~~~ IOSTM.cpp:466:28: error: 'PIN_M17' was not declared in this scope 466 | GPIO_WriteBit(PORT_M17, PIN_M17, on ? Bit_SET : Bit_RESET); | ^~~ make: *** [Makefile:308: obj_f4/IOSTM.o] Error 1

My Config.c is as follows.

if !defined(CONFIG_H)

define CONFIG_H

define MODE_DMR

define MODE_POCSAG

define MODE_FM

define EXTERNAL_OSC 12000000

define SERIAL_SPEED 460800 // Only works on newer boards like fast M4, M7, Teensy 3.x. External FM should work with this

define MODE_LEDS

define STM32F4_NUCLEO_MORPHO_HEADER

define SEND_RSSI_DATA

define SERIAL_REPEATER

define SERIAL_REPEATER_BAUD_RATE 9600

define USE_DCBLOCKER

define USE_ALTERNATE_POCSAG_LEDS

define USE_ALTERNATE_FM_LEDS

endif

System

Raspberry Pi3 b+ Description: Debian GNU/Linux 12 (bookworm) dpkg --print-architecture = arm64

Am i missing some lib??

Best Tim

[SA7BNT]

Problem fixed.

// #define MODE_LEDS