search

g4klx / MMDVMHost

The host program for the MMDVM
GNU General Public License v2.0
378 stars 274 forks source link

mmdvmhost+dvmega DSTAR does not return RX part #296

Open 5b4amd opened 7 years ago

5b4amd commented 7 years ago

Hi all, i have the following issue. Usally all the dstar hotspots and repeaters when you press ptt you have in return the call of the hotspot/repeater and after that the message with any info and the BER. Using ircddb gate and dstar repeater with my dvmega +rpi works ok and as expected. When i use mmdvmhost it does not return the rx part of the sentence (only the message which includes only the info and the BER) which is the call of the hotspot. Any ideas? (the ircddb starts 60sec after the mmdvmhost and everything seems to be connected as expected. (dstar reflcetor) (i want to use the mmdvmhost software because we are installing a mutliprotocol DSTAR - DMR hotspot)

Thanks in advance, 5B4AMD George

lb5je commented 7 years ago

What radio are you using? I have the same issue when using my ID31, but I do get all info if using my ID51. You my also try testing increasing the tx-delay.

73 de LB5JE

5b4amd commented 7 years ago

Thanks for your comment! Although i am trying with a E91 ,E92 and a 2820 i have the same results. I used different tx delay but again the same. With the same tx-delay works fine when i am using dstar repeater. I really cannot understand what is that. I even made a fresh install of the mmdvmhost image that i have which is tested from the digi community and it works.

73s de 5B4AMD