[Info]
RXFrequency=433600000
TXFrequency=433600000
Power=1
# The following lines are only needed if a direct connection to a DMR master is being used
Latitude=0.0
Longitude=0.0
Height=0
Location=Nowhere
Description=Multi-Mode Repeater
URL=www.google.co.uk
[Modem]
# Valid values are "null", "uart", "udp", and (on Linux) "i2c"
Protocol=uart
# The port and speed used for a UART connection
# UARTPort=\.\COM4
# UARTPort=/dev/ttyACM0
UARTPort=/dev/ttyUSB0
UARTSpeed=115200
# The port and address for an I2C connection
I2CPort=/dev/i2c
I2CAddress=0x22
_# IP parameters for UDP connection
ModemAddress=192.168.2.100
ModemPort=3334
LocalAddress=192.168.2.1
LocalPort=3335
[FM]
Enable=0
# Callsign=G4KLX
CallsignSpeed=20
CallsignFrequency=1000
CallsignTime=10
CallsignHoldoff=0
CallsignHighLevel=50
CallsignLowLevel=20
CallsignAtStart=1
CallsignAtEnd=1
CallsignAtLatch=0
RFAck=K
ExtAck=N
AckSpeed=20
AckFrequency=1750
AckMinTime=4
AckDelay=1000
AckLevel=50
# Timeout=180
TimeoutLevel=80
CTCSSFrequency=88.4
CTCSSThreshold=30
# CTCSSHighThreshold=30
# CTCSSLowThreshold=20
CTCSSLevel=20
KerchunkTime=0
HangTime=7
# AccessMode values are:
# 0 - Carrier access with COS
# 1 - CTCSS only access without COS
# 2 - CTCSS only access with COS
# 3 - CTCSS only access with COS to start, then carrier access with COS
AccessMode=1
# LinkMode=1 to remove almost all of the logic control
LinkMode=0
COSInvert=0
NoiseSquelch=0
SquelchThreshold=30
# SquelchHighThreshold=30
# SquelchLowThreshold=20
RFAudioBoost=1
MaxDevLevel=90
ExtAudioBoost=1
_# ModeHang=10
[DMR Network]
Enable=1
# Type may be either 'Direct' or 'Gateway'. When Direct you must provide the Master's
# address as well as the Password, and for DMR+, Options also.
Type=Direct
#LocalAddress=127.0.0.1
#LocalPort=62032
RemoteAddress=47.100.76.205
RemotePort=62031
Password=yum*****
Jitter=360
Slot1=1
Slot2=1
# Options=
# ModeHang=3
Debug=0
[FM Network]
Enable=0
# Protocol may be USRP or RAW
Protocol=USRP
# SampleRate is only used in RAW mode
SampleRate=48000
# The squelch file is optional and only used in RAW mode
SquelchFile=/tmp/sql
LocalAddress=127.0.0.1
LocalPort=3810
GatewayAddress=127.0.0.1
GatewayPort=4810
PreEmphasis=1
DeEmphasis=1
TXAudioGain=1.0
RXAudioGain=1.0
# ModeHang=3
Debug=0
`[General] Callsign=BG6MGD Id=4604902 Timeout=180 Duplex=0 # ModeHang=10_ RFModeHang=10 NetModeHang=3 Display=None Daemon=0
[Info] RXFrequency=433600000 TXFrequency=433600000 Power=1 # The following lines are only needed if a direct connection to a DMR master is being used Latitude=0.0 Longitude=0.0 Height=0 Location=Nowhere Description=Multi-Mode Repeater URL=www.google.co.uk
[Log] # Logging levels, 0=No logging DisplayLevel=1 FileLevel=1 FilePath=. FileRoot=MMDVM FileRotate=1
[CW Id] Enable=0 Time=10 # Callsign=
[DMR Id Lookup] File=DMRIds.dat Time=24
[NXDN Id Lookup] File=NXDN.csv Time=24
[Modem] # Valid values are "null", "uart", "udp", and (on Linux) "i2c" Protocol=uart # The port and speed used for a UART connection # UARTPort=\.\COM4 # UARTPort=/dev/ttyACM0 UARTPort=/dev/ttyUSB0 UARTSpeed=115200 # The port and address for an I2C connection I2CPort=/dev/i2c I2CAddress=0x22 _# IP parameters for UDP connection ModemAddress=192.168.2.100 ModemPort=3334 LocalAddress=192.168.2.1 LocalPort=3335
TXInvert=1 RXInvert=0 PTTInvert=0 TXDelay=100 RXOffset=0 TXOffset=0 DMRDelay=0 RXLevel=50 TXLevel=50 RXDCOffset=0 TXDCOffset=0 RFLevel=100 # CWIdTXLevel=50 # D-StarTXLevel=50 # DMRTXLevel=50 # YSFTXLevel=50 # P25TXLevel=50 # NXDNTXLevel=50 # M17TXLevel=50 # POCSAGTXLevel=50 # FMTXLevel=50 _# AX25TXLevel=50___ RSSIMappingFile=RSSI.dat UseCOSAsLockout=0 Trace=0 Debug=0
[Transparent Data] Enable=0 RemoteAddress=127.0.0.1 RemotePort=40094 LocalPort=40095 _# SendFrameType=0
[D-Star] Enable=0 Module=C SelfOnly=0 AckReply=1 AckTime=750 AckMessage=0 ErrorReply=1 RemoteGateway=0 _# ModeHang=10 WhiteList=
[DMR] Enable=1 Beacons=0 BeaconInterval=60 BeaconDuration=3 ColorCode=1 SelfOnly=0 EmbeddedLCOnly=0 DumpTAData=1 # Prefixes=234,235 # Slot1TGWhiteList= # Slot2TGWhiteList= CallHang=3 TXHang=4 # ModeHang=10 _# OVCM Values, 0=off, 1=rx_on, 2=tx_on, 3=bothon, 4=force off # OVCM=0
[System Fusion] Enable=0 LowDeviation=0 SelfOnly=0 TXHang=4 RemoteGateway=0 _# ModeHang=10
[P25] Enable=0 NAC=293 SelfOnly=0 OverrideUIDCheck=0 RemoteGateway=0 TXHang=5 _# ModeHang=10
[NXDN] Enable=0 RAN=1 SelfOnly=0 RemoteGateway=0 TXHang=5 _# ModeHang=10
[M17] Enable=0 CAN=0 SelfOnly=0 TXHang=5 _# ModeHang=10
[POCSAG] Enable=0 Frequency=439987500
[FM] Enable=0 # Callsign=G4KLX CallsignSpeed=20 CallsignFrequency=1000 CallsignTime=10 CallsignHoldoff=0 CallsignHighLevel=50 CallsignLowLevel=20 CallsignAtStart=1 CallsignAtEnd=1 CallsignAtLatch=0 RFAck=K ExtAck=N AckSpeed=20 AckFrequency=1750 AckMinTime=4 AckDelay=1000 AckLevel=50 # Timeout=180 TimeoutLevel=80 CTCSSFrequency=88.4 CTCSSThreshold=30 # CTCSSHighThreshold=30 # CTCSSLowThreshold=20 CTCSSLevel=20 KerchunkTime=0 HangTime=7 # AccessMode values are: # 0 - Carrier access with COS # 1 - CTCSS only access without COS # 2 - CTCSS only access with COS # 3 - CTCSS only access with COS to start, then carrier access with COS AccessMode=1 # LinkMode=1 to remove almost all of the logic control LinkMode=0 COSInvert=0 NoiseSquelch=0 SquelchThreshold=30 # SquelchHighThreshold=30 # SquelchLowThreshold=20 RFAudioBoost=1 MaxDevLevel=90 ExtAudioBoost=1 _# ModeHang=10
[AX.25] Enable=0 TXDelay=300 RXTwist=6 SlotTime=30 PPersist=128 Trace=1
[D-Star Network] Enable=0 LocalAddress=127.0.0.1 LocalPort=20011 GatewayAddress=127.0.0.1 GatewayPort=20010 _# ModeHang=3 Debug=0
[DMR Network] Enable=1 # Type may be either 'Direct' or 'Gateway'. When Direct you must provide the Master's # address as well as the Password, and for DMR+, Options also. Type=Direct #LocalAddress=127.0.0.1 #LocalPort=62032 RemoteAddress=47.100.76.205 RemotePort=62031 Password=yum***** Jitter=360 Slot1=1 Slot2=1 # Options= # ModeHang=3 Debug=0
[System Fusion Network] Enable=0 LocalAddress=127.0.0.1 LocalPort=3200 GatewayAddress=127.0.0.1 GatewayPort=4200 _# ModeHang=3 Debug=0
[P25 Network] Enable=0 LocalAddress=127.0.0.1 LocalPort=32010 GatewayAddress=127.0.0.1 GatewayPort=42020 _# ModeHang=3 Debug=0
[NXDN Network] Enable=0 Protocol=Icom LocalAddress=127.0.0.1 LocalPort=14021 GatewayAddress=127.0.0.1 GatewayPort=14020 _# ModeHang=3 Debug=0
[M17 Network] Enable=0 LocalAddress=127.0.0.1 LocalPort=17011 GatewayAddress=127.0.0.1 GatewayPort=17010 _# ModeHang=3 Debug=0
[POCSAG Network] Enable=0 LocalAddress=127.0.0.1 LocalPort=3800 GatewayAddress=127.0.0.1 GatewayPort=4800 _# ModeHang=3 Debug=0
[FM Network] Enable=0 # Protocol may be USRP or RAW Protocol=USRP # SampleRate is only used in RAW mode SampleRate=48000 # The squelch file is optional and only used in RAW mode SquelchFile=/tmp/sql LocalAddress=127.0.0.1 LocalPort=3810 GatewayAddress=127.0.0.1 GatewayPort=4810 PreEmphasis=1 DeEmphasis=1 TXAudioGain=1.0 RXAudioGain=1.0 # ModeHang=3 Debug=0
[AX.25 Network] Enable=0 Port=/dev/ttyp7 Speed=9600 Debug=0
[TFT Serial] _# Port=modem Port=/dev/ttyAMA0 Brightness=50
[HD44780] Rows=2 Columns=16
# For basic HD44780 displays (4-bit connection) # rs, strb, d0, d1, d2, d3 Pins=11,10,0,1,2,3
_# Device address for I2C I2CAddress=0x20
_# PWM backlight PWM=0 PWMPin=21 PWMBright=100 PWMDim=16
DisplayClock=1 UTC=0
[Nextion] # Port=modem Port=/dev/ttyAMA0 Brightness=50 DisplayClock=1 UTC=0 #Screen Layout: 0=G4KLX 2=ON7LDS ScreenLayout=2 IdleBrightness=20
[OLED] Type=3 Brightness=0 Invert=0 Scroll=1 Rotate=0 Cast=0 LogoScreensaver=1
[LCDproc] Address=localhost Port=13666 #LocalPort=13667 DimOnIdle=0 DisplayClock=1 UTC=0
[Lock File] Enable=0 File=/tmp/MMDVM_Active.lck
[Remote Control] Enable=0 Address=127.0.0.1 Port=7642 `__