search

g4klx / YSFClients

System Fusion network servers; a gateway and a parrot.
GNU General Public License v2.0
83 stars 95 forks source link

GPS data not getting passed via cloud based YSFReflector #166

Open rdbrown01 opened 4 years ago

rdbrown01 commented 4 years ago

I have setup a cloud based reflector, the callsign of the transmitting station is being passed but the distance between stations is not.

The two repeaters I am running are Pi-star repeaters running YSF only and APRS is setup and working on them. The strange this is the GPS coordinates get the repeater and are passed on to APRS.fi, but the two stations just see call signs on their display.

Any and all help would be greatly appreciated.

xe1dvi commented 4 years ago

I have the same issue, if connected to a YSF reflector call sign and distance shows on but it connected to XLX reflector only call sign shows. Sincerely, Rey.XE1DVI / W6DVI

On Wednesday, February 5, 2020, 01:42:08 PM PST, rdbrown01 <notifications@github.com> wrote:

I have setup a cloud based reflector, the callsign of the transmitting station is being passed but the distance between stations is not.

The two repeaters I am running are Pi-star repeaters running YSF only and APRS is setup and working on them. The strange this is the GPS coordinates get the repeater and are passed on to APRS.fi, but the two stations just see call signs on their display.

Any and all help would be greatly appreciated.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

g4klx commented 4 years ago

This needs to be taken up with the XLX developers rather than the MMDVM developers.

Sent from Yahoo Mail for iPhone

On Thursday, February 6, 2020, 07:00, xe1dvi notifications@github.com wrote:

I have the same issue, if connected to a YSF reflector call sign and distance shows on but it connected to XLX reflector only call sign shows. Sincerely, Rey.XE1DVI / W6DVI

On Wednesday, February 5, 2020, 01:42:08 PM PST, rdbrown01 notifications@github.com wrote:

I have setup a cloud based reflector, the callsign of the transmitting station is being passed but the distance between stations is not.

The two repeaters I am running are Pi-star repeaters running YSF only and APRS is setup and working on them. The strange this is the GPS coordinates get the repeater and are passed on to APRS.fi, but the two stations just see call signs on their display.

Any and all help would be greatly appreciated.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

rdbrown01 commented 4 years ago

Bumping this again, my issue is with YSFreflector.

On Thu, Feb 6, 2020 at 3:49 AM Jonathan Naylor notifications@github.com wrote:

This needs to be taken up with the XLX developers rather than the MMDVM developers.

Sent from Yahoo Mail for iPhone

On Thursday, February 6, 2020, 07:00, xe1dvi notifications@github.com wrote:

I have the same issue, if connected to a YSF reflector call sign and distance shows on but it connected to XLX reflector only call sign shows. Sincerely, Rey.XE1DVI / W6DVI

On Wednesday, February 5, 2020, 01:42:08 PM PST, rdbrown01 < notifications@github.com> wrote:

I have setup a cloud based reflector, the callsign of the transmitting station is being passed but the distance between stations is not.

The two repeaters I am running are Pi-star repeaters running YSF only and APRS is setup and working on them. The strange this is the GPS coordinates get the repeater and are passed on to APRS.fi, but the two stations just see call signs on their display.

Any and all help would be greatly appreciated.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or unsubscribe.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/g4klx/YSFClients/issues/166?email_source=notifications&email_token=AMFT35FNOFAISIAP5ILW6E3RBPFJRA5CNFSM4KQSQ2R2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEK6MVBA#issuecomment-582797956, or unsubscribe https://github.com/notifications/unsubscribe-auth/AMFT35CE4Q7P7FTTXQVHZWLRBPFJRANCNFSM4KQSQ2RQ .

-- Roland D. Brown II KY4RDB

606 487 2999 (Work) 606 335 3928 (Cell) 606 775 0006 (Home) roland@rebrown.org

This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

xe1dvi commented 4 years ago

Sent info to XLX developers.

Thank you!