Closed kc9gqr closed 7 years ago
@kc9gqr The APRS-Data is not forwarded by the YSFReflector - it is forwarded by the YSFGateway, so you do not need to have the YSFReflector installed. All you need is set a proper password for APRS-IS. You can get your password at: http://apps.magicbug.co.uk/passcode/index.php
Thank you for the response..
Shark RF (OPEN SPOT) pointed at my own YSF REFLECTOR/YSF GATEWAY
On Sun, Oct 2, 2016 at 10:41 AM, Kim - DG9VH notifications@github.com wrote:
@kc9gqr https://github.com/kc9gqr The APRS-Data is not forwarded by the YSFReflector - it is forwarded by the YSFGateway, so you do not need to have the YSFReflector installed. All you need is set a proper password for APRS-IS. You can get your password at: http://apps.magicbug.co.uk/ passcode/index.php
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/g4klx/YSFClients/issues/73#issuecomment-250977573, or mute the thread https://github.com/notifications/unsubscribe-auth/AVbHD8RpMgPc4tbuD09akhYicA4fgJCEks5qv9CigaJpZM4KIZuq .
Just make correct config in YSFReflector.ini, it updates by polling-response. Am 02.10.2016 18:02 schrieb kc9gqr notifications@github.com:Thank you for the response..
Shark RF (OPEN SPOT) pointed at my own YSF REFLECTOR/YSF GATEWAY
On Sun, Oct 2, 2016 at 10:41 AM, Kim - DG9VH notifications@github.com wrote:
@kc9gqr https://github.com/kc9gqr The APRS-Data is not forwarded by the YSFReflector - it is forwarded by the YSFGateway, so you do not need to have the YSFReflector installed. All you need is set a proper password for APRS-IS. You can get your password at: http://apps.magicbug.co.uk/ passcode/index.php
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/g4klx/YSFClients/issues/73#issuecomment-250977573, or mute the thread https://github.com/notifications/unsubscribe-auth/AVbHD8RpMgPc4tbuD09akhYicA4fgJCEks5qv9CigaJpZM4KIZuq .
—You are receiving this because you commented.Reply to this email directly, view it on GitHub, or mute the thread.
About OpenSpot I don't know... Am 02.10.2016 18:02 schrieb kc9gqr notifications@github.com:Thank you for the response..
Shark RF (OPEN SPOT) pointed at my own YSF REFLECTOR/YSF GATEWAY
On Sun, Oct 2, 2016 at 10:41 AM, Kim - DG9VH notifications@github.com wrote:
@kc9gqr https://github.com/kc9gqr The APRS-Data is not forwarded by the YSFReflector - it is forwarded by the YSFGateway, so you do not need to have the YSFReflector installed. All you need is set a proper password for APRS-IS. You can get your password at: http://apps.magicbug.co.uk/ passcode/index.php
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/g4klx/YSFClients/issues/73#issuecomment-250977573, or mute the thread https://github.com/notifications/unsubscribe-auth/AVbHD8RpMgPc4tbuD09akhYicA4fgJCEks5qv9CigaJpZM4KIZuq .
—You are receiving this because you commented.Reply to this email directly, view it on GitHub, or mute the thread.
IF I have a YSF reflector and a YSF Gateway software running with no radio hoooked to it and i point a open spot to that reflector will it pass GPS/Callsign to aprs.fi?