Cool storage for four nozzles for Flashforge Adventurer 5 (AD5M).
Uses 1.75mm filament as the hinge pin.
Two options to choose from:
Box and lid
Box and lid that mount onto back of AD5M printer, whenever the DIY printed enclosure is in use. The enclosure mounts the spool holder in a different spot, which frees up the two screw holes that formerly attached it. The mount in this design is intended to attach by using those same screw holes. Attach the mount with two screws, then slide the box base onto the mount.
Print settings
Print as oriented. Prints without need of supports. I used 10% infill on the lid, and 15% infill on the base and the mount. I used 2 perimeter walls, with a 0.4 mm nozzle.
I created another remix for a printable enhancement of the AD5M:
Printable files: https://www.printables.com/model/814546-flashforge-adventurer-5m-ad5m-nozzle-storage-box-t
This short video explains everything:
https://www.youtube.com/watch?v=D21v0OObVsc
Cool storage for four nozzles for Flashforge Adventurer 5 (AD5M).
Uses 1.75mm filament as the hinge pin.
Two options to choose from:
Print settings Print as oriented. Prints without need of supports. I used 10% infill on the lid, and 15% infill on the base and the mount. I used 2 perimeter walls, with a 0.4 mm nozzle.
My PayPal tip jar: https://paypal.me/design8studio