Zodiac CNX 4090 iQ Not Working

[jordisco]

Zodiac CNX 4090 iQ Not Working: username: xxxxxxx first_name: xxxxxxx last_name: xxxxxxx serial_number: xxxxxxxxx robot_name: Limpia Fondos last_online: "2024-05-29T12:46:24.495000" temperature: "0" pressure: N/A total_hours: 0 error_state: N/A lift_control: N/A equipment_id: N/A cycle_start_time: "2000-01-01T09:00:00.000000" canister: N/A running: N/A model: CNX 4090 iQ

[galletn]

Hi there, can you check again, there are some updates that might affect you model

[galletn]

any update? @jordisco

[jordisco]

  Hi, the same result, :( 

   -- 
  Sent from Canary 

   On martes, jul 02, 2024 at 10:30 p. m., galletn ***@***.***> wrote: 

  any update? @jordisco 
  —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***> 
  ***@***.***": ***@***.***": "EmailMessage","potentialAction": ***@***.***": "ViewAction","target": "https://github.com/galletn/iaqualink/issues/18#issuecomment-2204357171","url": "https://github.com/galletn/iaqualink/issues/18#issuecomment-2204357171","name": "View Issue"},"description": "View this Issue on GitHub","publisher": ***@***.***": "Organization","name": "GitHub","url": "https://github.com"}}]

[galletn]

Hi @jordisco can you maybe change your password and send me over your credentials? then I'm willing to have a look. nicolas.gallet@skynet.be

[jordisco]

Hi, sent.

El 2 de julio de 2024 a las 22:42:33, galletn @.***) escribió:

Hi @jordisco https://github.com/jordisco can you maybe change your password and send me over your credentials? then I'm willing to have a look. @.***

— Reply to this email directly, view it on GitHub https://github.com/galletn/iaqualink/issues/18#issuecomment-2204377994, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQN65MPX4CX5XDV7BY73YILZKMGDRAVCNFSM6AAAAABIOXLDTCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMBUGM3TOOJZGQ . You are receiving this because you were mentioned.Message ID: @.***>

[galletn]

Working fine here:make sure you run the latest code! and switch to vacuum. details given by mail.

[galletn]

works see screens and description

[jordisco]

Wow, yes, work fine, Thanks good job!!!

[jordisco]

Will it be possible to control it in the future, or will we only be able to see the status?

[galletn]

Hi @jordisco if you correctly add the vacuum entity and add it to your dashbord you are able to stop and start the cleaner:

[jordisco]

When I press start it tells me:

The vacuum/start service could not be called. cannot access local variable 'request' where it is not associated with a value

[galletn]

Hi @jordisco,

can I use your credentials again? And can you leave the Robot in the pool for a while?

I did not have the chance yet to test it out on the cyclone models, vr works fine.

Otherwise I can ask Alex if I can use his to check.

Thanks!

[jordisco]

ok, that's it

[galletn]

Can you update one more time and retry: was a very small code issue

[jordisco]

yeeeeeees!!! work fine

[galletn]

Excellent, thanks for testing!

Let me know if you have any other things that you would like to see or do. I added 2 features that are on my radar in the list: remaining cleaning time & lift function for the VR robots.

[jordisco]

wow, good idea, is possible warning could be added for wheel jams? sorry for mi english.

[galletn]

yes, I'll have a look if I see this somewhere in what is returned!