search

gammapy / enrico

Enrico helps you with your Fermi data analysis
http://enrico.readthedocs.io/
BSD 3-Clause "New" or "Revised" License
22 stars 26 forks source link

enrico_sed issue: Error in "Preparing submission of fit into energy bins" #157

Open abhradeep-1996 opened 3 years ago

abhradeep-1996 commented 3 years ago

Hi, I am facing the following error while running enrico_sed. After fitting the spectrum over the full energy range with GTLIKE, it shows the following error:

****

Preparing submission of fit into energy bins

****

('Emin = 100.0 MeV', 'Emax = 300000.0 MeV', 'Nbins = 5') Debug: read energy bins: logE Energy bins (before energy cuts): [1.00000000e+02 4.95934420e+02 2.45950949e+03 1.21975541e+04 6.04918691e+04 3.00000000e+05] Energy bins (after energy cuts): [1.00000000e+02 4.95934420e+02 2.45950949e+03 1.21975541e+04 6.04918691e+04 3.00000000e+05] [Message]: Submitting # 0 at energy 222 Traceback (most recent call last): File "/home/hegro/enrico/bin/enrico_sed", line 48, in liste = np.genfromtxt(sys.argv[1],dtype="str",unpack=True) File "/home/hegro/anaconda3/envs/fermi/lib/python3.7/site-packages/numpy/lib/npyio.py", line 2068, in genfromtxt raise ValueError(errmsg) ValueError: Some errors were detected ! Line #9 (got 1 columns instead of 3) Line #20 (got 1 columns instead of 3) Line #29 (got 1 columns instead of 3) Line #37 (got 1 columns instead of 3) Line #43 (got 1 columns instead of 3) Line #49 (got 1 columns instead of 3) Line #54 (got 1 columns instead of 3) Line #70 (got 1 columns instead of 3) Line #79 (got 1 columns instead of 3) Line #85 (got 1 columns instead of 3) Line #101 (got 1 columns instead of 3) Line #111 (got 1 columns instead of 3) Line #123 (got 1 columns instead of 3) Line #142 (got 1 columns instead of 3) Line #158 (got 1 columns instead of 3) Line #166 (got 1 columns instead of 3) Line #181 (got 1 columns instead of 3) Line #195 (got 1 columns instead of 3) Line #206 (got 1 columns instead of 3) Line #212 (got 1 columns instead of 3) Line #222 (got 1 columns instead of 3) Line #226 (got 1 columns instead of 3)

During handling of the above exception, another exception occurred:

Traceback (most recent call last): File "/home/hegro/enrico/bin/enrico_sed", line 55, in sed(config,infile) File "/home/hegro/enrico/bin/enrico_sed", line 13, in sed run(infile) File "/home/hegro/enrico/enrico/RunGTlike.py", line 262, in run energybin.RunEbin(folder,Nbin,Fit,FitRunner,sedresult) File "/home/hegro/enrico/enrico/energybin.py", line 209, in RunEbin configfiles = PrepareEbin(Fit, FitRunner,sedresult) File "/home/hegro/enrico/enrico/energybin.py", line 202, in PrepareEbin config.write(open(config['out'] + '/' +filename, 'w')) #save the config file in a ascii file File "/home/hegro/enrico/enrico/extern/configobj.py", line 2098, in write outfile.write(output_bytes) TypeError: write() argument must be str, not bytes

It seems that there are two different issues. One in "/home/hegro/enrico/bin/enrico_sed", line 48 and another in "/home/hegro/enrico/enrico/extern/configobj.py", line 2098. The program stops just before making the configuration file for the first energy bin.

davidsanchez commented 3 years ago

Hi strange error. So there is no .conf in the EBin folder ? david

abhradeep-1996 commented 3 years ago

Hi @davidsanchez, Thanks for your quick reply. It creates a config file only for the 0th energy bin in the Ebin#/ folder. But that file is empty. It seems that enrico_sed is showing this error while writing the config file.

davidsanchez commented 3 years ago

Do you have the output of the fit ?

abhradeep-1996 commented 3 years ago

Yes, I have the .results file and also fitted models and figures in the Spectrum folder.

davidsanchez commented 3 years ago

I mean could you pass here the output (not the file but what is printed on the screen/log)

abhradeep-1996 commented 3 years ago

The following is the GTLIKE output:

****

*** 8 gtlike --- Run likelihood analysis

****

Fit output with MINUIT: 49240.716557181666 [quality: 3] Fit output with MINUIT: 49240.71546901978 [quality: 3]

****

*** 9 Remove all the weak (TS<1.00) sources

****

[FitMaker]: deleting source 4FGL J1332.6-1256 with TS = -0.00712294147524517 from the model [FitMaker]: deleting source 4FGL J1337.6-1257 with TS = -0.0054168528149602935 from the model [FitMaker]: deleting source 4FGL J1339.9-0138 with TS = -0.00010943903180304915 from the model [FitMaker]: deleting source 4FGL J1340.0-1501 with TS = -4.487123806029558e-05 from the model [FitMaker]: deleting source 4FGL J1340.8-0409 with TS = -0.002124518563505262 from the model [FitMaker]: deleting source 4FGL J1341.8-2053 with TS = 0.00562053217436187 from the model [FitMaker]: deleting source 4FGL J1344.2-1723 with TS = 0.002037400350673124 from the model [FitMaker]: deleting source 4FGL J1349.5-1131 with TS = -0.009064615194802172 from the model [FitMaker]: deleting source 4FGL J1351.0+0029 with TS = -0.00397688354132697 from the model [FitMaker]: deleting source 4FGL J1351.4-1529 with TS = 0.0005873925256310031 from the model [FitMaker]: deleting source 4FGL J1354.3-0206 with TS = -0.008570907593821175 from the model [FitMaker]: deleting source 4FGL J1354.8-1041 with TS = -0.023390544301946647 from the model [FitMaker]: deleting source 4FGL J1356.2-1726 with TS = -0.00021614355500787497 from the model [FitMaker]: deleting source 4FGL J1356.6+0234 with TS = -0.0003922647883882746 from the model [FitMaker]: deleting source 4FGL J1357.5+0127 with TS = -0.004804356009117328 from the model [FitMaker]: deleting source 4FGL J1359.1-1152 with TS = -0.0008298519387608394 from the model [FitMaker]: deleting source 4FGL J1359.4+0202 with TS = -0.006153804948553443 from the model [FitMaker]: deleting source 4FGL J1400.0-2415 with TS = -0.00019897155289072543 from the model [FitMaker]: deleting source 4FGL J1400.6-1432 with TS = -0.01788416002818849 from the model [FitMaker]: deleting source 4FGL J1401.2-0915 with TS = -0.018669255761778913 from the model [FitMaker]: deleting source 4FGL J1402.5-1827 with TS = 0.0305073520867154 from the model [FitMaker]: deleting source 4FGL J1404.8+0402 with TS = -0.004239161993609741 from the model [FitMaker]: deleting source 4FGL J1405.3-0640 with TS = -0.0005581212608376518 from the model [FitMaker]: deleting source 4FGL J1405.9-1853 with TS = 0.001975885999854654 from the model [FitMaker]: deleting source 4FGL J1406.1-2508 with TS = 0.005351646672352217 from the model [FitMaker]: deleting source 4FGL J1406.4-1654 with TS = -0.0003738041123142466 from the model [FitMaker]: deleting source 4FGL J1407.4-0820 with TS = -0.1396521363494685 from the model [FitMaker]: deleting source 4FGL J1408.9-0751 with TS = -0.6610691065288847 from the model [FitMaker]: deleting source 4FGL J1410.1+0202 with TS = -0.011197760599316098 from the model [FitMaker]: deleting source 4FGL J1411.5-0723 with TS = -0.0692166864319006 from the model [FitMaker]: deleting source 4FGL J1415.9-1504 with TS = -0.11498336688964628 from the model [FitMaker]: deleting source 4FGL J1416.1-2417 with TS = -0.002590631425846368 from the model [FitMaker]: deleting source 4FGL J1419.3+0444 with TS = -0.010185415143496357 from the model [FitMaker]: deleting source 4FGL J1419.4-0838 with TS = -8.049897782693733 from the model [FitMaker]: deleting source 4FGL J1420.3+0612 with TS = -0.04499155444500502 from the model [FitMaker]: deleting source 4FGL J1420.9-2431 with TS = -0.013904778665164486 from the model [FitMaker]: deleting source 4FGL J1421.1-1120 with TS = -0.37450297402392607 from the model [FitMaker]: deleting source 4FGL J1424.1-1750 with TS = 0.6752714891335927 from the model [FitMaker]: deleting source 4FGL J1424.2+0433 with TS = -0.09707877573964652 from the model [FitMaker]: deleting source 4FGL J1425.4-0119 with TS = -0.3083101874071872 from the model [FitMaker]: deleting source 4FGL J1427.4-1823 with TS = 0.8454158349777572 from the model [FitMaker]: deleting source 4FGL J1429.8-0739 with TS = -0.32103219722921494 from the model [FitMaker]: deleting source 4FGL J1429.8-3058 with TS = -0.08873161011433695 from the model [FitMaker]: deleting source 4FGL J1431.1-3120 with TS = -0.0877268161275424 from the model [FitMaker]: deleting source 4FGL J1438.0-3128 with TS = -0.08501442096894607 from the model [FitMaker]: deleting source 4FGL J1439.5-2525 with TS = -0.08072148643259425 from the model [FitMaker]: deleting source 4FGL J1440.0-1530 with TS = -0.5827226449036971 from the model [FitMaker]: deleting source 4FGL J1440.0-2343 with TS = -0.08050154559896328 from the model [FitMaker]: deleting source 4FGL J1440.9+0609 with TS = -0.2526294031558791 from the model [FitMaker]: deleting source 4FGL J1441.4-1934 with TS = -0.3516205923369853 from the model [FitMaker]: deleting source 4FGL J1441.6-1522 with TS = -0.22813979879720137 from the model [FitMaker]: deleting source 4FGL J1442.0+0732 with TS = -0.20392694701149594 from the model [FitMaker]: deleting source 4FGL J1442.1-2800 with TS = -0.1801933503447799 from the model [FitMaker]: deleting source 4FGL J1442.2+0622 with TS = -0.24505722265166696 from the model [FitMaker]: deleting source 4FGL J1442.7+1200 with TS = -0.19393373461207375 from the model [FitMaker]: deleting source 4FGL J1443.7-0954 with TS = 0.5919872793310788 from the model [FitMaker]: deleting source 4FGL J1445.0-0326 with TS = 0.038157326518557966 from the model [FitMaker]: deleting source 4FGL J1445.2-1954 with TS = -0.4091331794625148 from the model [FitMaker]: deleting source 4FGL J1445.9-1626 with TS = -1.4692265302728629 from the model [FitMaker]: deleting source 4FGL J1446.0-3039 with TS = -0.35505657641624566 from the model [FitMaker]: deleting source 4FGL J1446.8-1830 with TS = -0.5631435969262384 from the model [FitMaker]: deleting source 4FGL J1447.0-2657 with TS = -0.35449709350359626 from the model [FitMaker]: deleting source 4FGL J1449.7-0910 with TS = -0.6322071081522154 from the model [FitMaker]: deleting source 4FGL J1450.4+0910 with TS = -0.40708087899838574 from the model [FitMaker]: deleting source 4FGL J1450.8-1424 with TS = -0.6991924689064035 from the model [FitMaker]: deleting source 4FGL J1451.5+1415 with TS = -0.3978167547029443 from the model [FitMaker]: deleting source 4FGL J1453.0-1318 with TS = -0.598968280130066 from the model [FitMaker]: deleting source 4FGL J1458.8-2120 with TS = 0.8467100420966744 from the model [FitMaker]: deleting source 4FGL J1459.5+1527 with TS = -0.44808528445719276 from the model [FitMaker]: deleting source 4FGL J1504.4+1029 with TS = -1.1950261394522386 from the model [FitMaker]: deleting source 4FGL J1506.4-0540 with TS = -0.6278970189887332 from the model [FitMaker]: deleting source 4FGL J1506.6+0813 with TS = -0.5225255366094643 from the model [FitMaker]: deleting source 4FGL J1507.1-1901 with TS = -0.3066996732231928 from the model [FitMaker]: deleting source 4FGL J1509.8-2906 with TS = -0.5499284198158421 from the model [FitMaker]: deleting source 4FGL J1511.8-0513 with TS = -0.8063493656372884 from the model [FitMaker]: deleting source 4FGL J1512.1-2255 with TS = 0.07174629121436737 from the model [FitMaker]: deleting source 4FGL J1513.0-3118 with TS = -0.7445610385329928 from the model [FitMaker]: deleting source 4FGL J1513.4-2549 with TS = -0.7277904406364542 from the model [FitMaker]: deleting source 4FGL J1513.4-3231 with TS = -0.7332403636828531 from the model [FitMaker]: deleting source 4FGL J1513.7-1519 with TS = -1.2569260614545783 from the model [FitMaker]: deleting source 4FGL J1514.6-2044 with TS = -0.9393997341103386 from the model [FitMaker]: deleting source 4FGL J1514.8-0949 with TS = -0.4429111217323225 from the model [FitMaker]: deleting source 4FGL J1516.5+0015 with TS = -0.7426417550450424 from the model [FitMaker]: deleting source 4FGL J1518.0-2731 with TS = -1.37464570227894 from the model [FitMaker]: deleting source 4FGL J1518.4+0750 with TS = -1.4463787041459 from the model [FitMaker]: deleting source 4FGL J1518.6+0614 with TS = -1.4699186400102917 from the model [FitMaker]: deleting source 4FGL J1518.8+0203 with TS = -1.4848621228593402 from the model [FitMaker]: deleting source 4FGL J1520.0-0905 with TS = -1.8766564701509196 from the model [FitMaker]: deleting source 4FGL J1520.8-0348 with TS = -2.012707375586615 from the model [FitMaker]: deleting source 4FGL J1521.1+0421 with TS = -1.5306927689525764 from the model [FitMaker]: deleting source 4FGL J1522.6-2730 with TS = -1.5203909049159847 from the model [FitMaker]: deleting source 4FGL J1523.2+0533 with TS = -1.8323717760649743 from the model [FitMaker]: deleting source 4FGL J1526.1-0831 with TS = -0.8386709330516169 from the model [FitMaker]: deleting source 4FGL J1526.6-2743 with TS = -1.6678279140178347 from the model [FitMaker]: deleting source 4FGL J1526.7-1529 with TS = -1.5006464588805102 from the model [FitMaker]: deleting source 4FGL J1527.8+1013 with TS = -1.7209935879218392 from the model [FitMaker]: deleting source 4FGL J1528.2-2905 with TS = -1.563290631675045 from the model [FitMaker]: deleting source 4FGL J1528.5-2240 with TS = -1.3921759924851358 from the model [FitMaker]: deleting source 4FGL J1530.0-1522 with TS = -2.2924059934011893 from the model [FitMaker]: deleting source 4FGL J1530.5-3026 with TS = -1.6009327300853329 from the model [FitMaker]: deleting source 4FGL J1531.6+0406 with TS = -1.5690247454040218 from the model [FitMaker]: deleting source 4FGL J1532.7-1319 with TS = -1.794215024652658 from the model [FitMaker]: deleting source 4FGL J1534.3-3312 with TS = -1.6439705352531746 from the model [FitMaker]: deleting source 4FGL J1534.8+0131 with TS = -1.854856799429399 from the model [FitMaker]: deleting source 4FGL J1535.3-3135 with TS = -2.040357100064284 from the model [FitMaker]: deleting source 4FGL J1536.8-3155 with TS = -2.0372036802145885 from the model [FitMaker]: deleting source 4FGL J1537.9-1344 with TS = -2.3804225515923463 from the model [FitMaker]: deleting source 4FGL J1538.9+0425 with TS = -2.764180639118422 from the model [FitMaker]: deleting source 4FGL J1539.1+1008 with TS = -2.0972365172492573 from the model [FitMaker]: deleting source 4FGL J1539.7-1127 with TS = -0.0814510937925661 from the model [FitMaker]: deleting source 4FGL J1540.7+1449 with TS = -2.2104425191500923 from the model [FitMaker]: deleting source 4FGL J1541.7+1413 with TS = -2.2100856833567377 from the model [FitMaker]: deleting source 4FGL J1541.9-2915 with TS = -2.204504262015689 from the model [FitMaker]: deleting source 4FGL J1543.6+0452 with TS = -2.4586422513239086 from the model [FitMaker]: deleting source 4FGL J1543.6-0244 with TS = -3.2729999945440795 from the model [FitMaker]: deleting source 4FGL J1544.2-2554 with TS = -2.4789599007490324 from the model [FitMaker]: deleting source 4FGL J1545.8-2336 with TS = -2.49981462174037 from the model [FitMaker]: deleting source 4FGL J1546.0+0819 with TS = -2.501213362760609 from the model [FitMaker]: deleting source 4FGL J1546.1-1003 with TS = -2.0015596741141053 from the model [FitMaker]: deleting source 4FGL J1546.8-3244 with TS = -2.432929141970817 from the model [FitMaker]: deleting source 4FGL J1547.3-1531 with TS = -2.6921811999636702 from the model [FitMaker]: deleting source 4FGL J1547.3-2802 with TS = -2.4674340159690473 from the model [FitMaker]: deleting source 4FGL J1548.8-2250 with TS = -2.716789146477822 from the model [FitMaker]: deleting source 4FGL J1549.5+0236 with TS = -0.1269955691532232 from the model [FitMaker]: deleting source 4FGL J1549.8-3044 with TS = -2.9124242155085085 from the model [FitMaker]: deleting source 4FGL J1550.7+0528 with TS = -2.9749823057063622 from the model [FitMaker]: deleting source 4FGL J1550.8-0822 with TS = -3.320431684871437 from the model [FitMaker]: deleting source 4FGL J1550.8-1750 with TS = -3.7547942544333637 from the model [FitMaker]: deleting source 4FGL J1552.0+0850 with TS = -3.116513828819734 from the model [FitMaker]: deleting source 4FGL J1553.5-3118 with TS = -3.1233273915131576 from the model [FitMaker]: deleting source 4FGL J1553.6+1257 with TS = -3.1199018865299877 from the model [FitMaker]: deleting source 4FGL J1553.6-2422 with TS = -3.26602428710612 from the model [FitMaker]: deleting source 4FGL J1554.4-1215 with TS = -3.979134609660832 from the model [FitMaker]: deleting source 4FGL J1555.7+1111 with TS = -3.2220485062571242 from the model [FitMaker]: deleting source 4FGL J1555.7-2908 with TS = -3.220626394817373 from the model [FitMaker]: deleting source 4FGL J1557.9-0001 with TS = -3.3736008114210563 from the model [FitMaker]: deleting source 4FGL J1557.9-1404 with TS = -3.3684789294784423 from the model [FitMaker]: deleting source 4FGL J1559.8-2525 with TS = -3.529605369840283 from the model [FitMaker]: deleting source 4FGL J1600.9-3054 with TS = -3.3784282783744857 from the model [FitMaker]: deleting source 4FGL J1602.9-1928 with TS = -3.6147006698010955 from the model [FitMaker]: deleting source 4FGL J1603.6-0451 with TS = -1.7658788010012358 from the model [FitMaker]: deleting source 4FGL J1603.8+1104 with TS = -3.6699032923352206 from the model [FitMaker]: deleting source 4FGL J1605.1-1140 with TS = -4.543095158049255 from the model [FitMaker]: deleting source 4FGL J1608.0-2038 with TS = -3.957604248265852 from the model [FitMaker]: deleting source 4FGL J1608.4+0055 with TS = -3.837419725372456 from the model [FitMaker]: deleting source 4FGL J1608.7+1029 with TS = -3.7961084456328535 from the model [FitMaker]: deleting source 4FGL J1612.4+0409 with TS = -3.968019324776833 from the model [FitMaker]: deleting source 4FGL J1613.3-1907 with TS = -3.993967721282388 from the model [FitMaker]: deleting source 4FGL J1614.5-2230 with TS = -3.9933687043812824 from the model [FitMaker]: deleting source 4FGL J1615.3-1512 with TS = -3.997596652203356 from the model [FitMaker]: deleting source 4FGL J1616.9-2257 with TS = -3.8500702803139575 from the model [FitMaker]: deleting source 4FGL J1617.2-2535 with TS = -3.848815622564871 from the model [FitMaker]: deleting source 4FGL J1617.3-1513 with TS = -4.021806043718243 from the model [FitMaker]: deleting source 4FGL J1621.0-2625 with TS = -3.864028885640437 from the model [FitMaker]: deleting source 4FGL J1621.7-1103 with TS = -4.040665007472853 from the model [FitMaker]: deleting source 4FGL J1623.0-0315 with TS = -4.053999381794711 from the model [FitMaker]: deleting source 4FGL J1623.7-2315c with TS = -3.9335171463462757 from the model [FitMaker]: deleting source 4FGL J1625.1-0020 with TS = -3.9349588968907483 from the model [FitMaker]: deleting source 4FGL J1625.3-2338 with TS = -3.937131130194757 from the model [FitMaker]: deleting source 4FGL J1625.7-2527 with TS = -3.935349335835781 from the model [FitMaker]: deleting source 4FGL J1626.9-2431e with TS = -3.9536801656649914 from the model [FitMaker]: deleting source 4FGL J1627.7+0251 with TS = -3.9639646167197498 from the model [FitMaker]: deleting source 4FGL J1630.1-1049 with TS = -4.129757436996442 from the model [FitMaker]: deleting source 4FGL J1632.8-1048 with TS = -4.124212827649899 from the model [FitMaker]: deleting source 4FGL J1634.7+0235 with TS = -3.989087947367807 from the model [FitMaker]: deleting source 4FGL J1636.5-0454 with TS = -3.9881095696182456 from the model [FitMaker]: deleting source 4FGL J1638.0+0042 with TS = -3.98934607092815 from the model [FitMaker]: deleting source 4FGL J1641.9-0621 with TS = -3.972606141556753 from the model [FitMaker]: deleting source 4FGL J1643.5-0646 with TS = -3.9964283176668687 from the model [FitMaker]: deleting source 4FGL J1646.0-0942 with TS = -4.000405719489208 from the model [FitMaker]: deleting source 4FGL J1646.7-1330 with TS = -4.002770798004349 from the model [FitMaker]: deleting source 4FGL J1647.2-0154 with TS = -4.002640689301188 from the model [FitMaker]: deleting source 4FGL J1648.1-1547 with TS = -4.002837581574568 from the model [FitMaker]: keeping source 4FGL J1418.4-0233 with TS=6.26e+00 [FitMaker]: keeping source 4FGL J1433.0-1801 with TS=2.18e+00 [FitMaker]: keeping source 4FGL J1503.7-1540 with TS=2.78e+00 [FitMaker]: keeping source 4FGL J1505.0+0326 with TS=2.85e+00 [FitMaker]: keeping source 4FGL J1510.8-0542 with TS=1.45e+00 [FitMaker]: keeping source 4FGL J1512.2+0202 with TS=8.87e+00 [FitMaker]: keeping source 4FGL J1517.7-2422 with TS=2.31e+00 [FitMaker]: keeping source 4FGL J1544.5-1126 with TS=5.39e+00 [FitMaker]: keeping source 4FGL J1549.8-0659 with TS=6.73e+00 [FitMaker]: keeping source GalDiffModel with TS=5.39e+02 [FitMaker]: keeping source IsoDiffModel with TS=4.75e+01 [FitMaker]: keeping source PKS1510 with TS=7.78e+01

****

*** 10 Re-optimize ---

****

Fit output with MINUIT: 49237.40090700385 [quality: 3] [FitMaker]: Fit with gtlike performed

davidsanchez commented 3 years ago

No value of the source parameters?

abhradeep-1996 commented 3 years ago

Yes, the source parameters are given below. Sorry for being late.

****

*** 12 Results --- Print results of the fit

****

(4FGL J1418.4-0233 Spectrum: LogParabola 0 norm: 7.394e-01 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-12) fixed 1 alpha: 1.646e+00 0.000e+00 5.000e-01 5.000e+00 ( 1.000e+00) fixed 2 beta: 7.432e-02 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 3 Eb: 1.836e+03 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1433.0-1801 Spectrum: LogParabola 4 norm: 1.251e+00 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-12) fixed 5 alpha: 2.491e+00 0.000e+00 5.000e-01 5.000e+00 ( 1.000e+00) fixed 6 beta: 2.664e-01 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 7 Eb: 7.345e+02 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1503.7-1540 Spectrum: PowerLaw 8 Prefactor: 6.605e-01 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-13) fixed 9 Index: -1.806e+00 0.000e+00 -6.000e+00 -5.000e-01 ( 1.000e+00) fixed 10 Scale: 3.868e+03 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1505.0+0326 Spectrum: LogParabola 11 norm: 1.771e+00 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-11) fixed 12 alpha: 2.477e+00 0.000e+00 5.000e-01 5.000e+00 ( 1.000e+00) fixed 13 beta: 1.038e-01 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 14 Eb: 4.009e+02 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1510.8-0542 Spectrum: LogParabola 15 norm: 2.736e+00 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-12) fixed 16 alpha: 2.385e+00 0.000e+00 5.000e-01 5.000e+00 ( 1.000e+00) fixed 17 beta: 1.082e-01 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 18 Eb: 8.653e+02 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1512.2+0202 Spectrum: LogParabola 19 norm: 2.310e+00 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-12) fixed 20 alpha: 2.013e+00 0.000e+00 5.000e-01 5.000e+00 ( 1.000e+00) fixed 21 beta: 1.158e-01 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 22 Eb: 9.521e+02 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1517.7-2422 Spectrum: LogParabola 23 norm: 1.037e+00 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-11) fixed 24 alpha: 2.078e+00 0.000e+00 5.000e-01 5.000e+00 ( 1.000e+00) fixed 25 beta: 2.835e-02 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 26 Eb: 8.241e+02 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1544.5-1126 Spectrum: LogParabola 27 norm: 4.632e-01 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-11) fixed 28 alpha: 2.290e+00 0.000e+00 5.000e-01 5.000e+00 ( 1.000e+00) fixed 29 beta: 1.942e-01 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 30 Eb: 6.317e+02 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1549.8-0659 Spectrum: PowerLaw 31 Prefactor: 1.192e+00 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-13) fixed 32 Index: -1.946e+00 0.000e+00 -6.000e+00 -5.000e-01 ( 1.000e+00) fixed 33 Scale: 2.845e+03 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

GalDiffModel Spectrum: ConstantValue 34 Value: 8.948e-01 5.175e-02 1.000e-02 1.000e+01 ( 1.000e+00)

IsoDiffModel Spectrum: FileFunction 35 Normalization: 1.159e+00 1.670e-01 1.000e-03 1.000e+03 ( 1.000e+00)

PKS1510 Spectrum: EblAtten::LogParabola 36 norm: 2.711e-01 6.199e-02 0.000e+00 1.000e+04 ( 1.000e-10) 37 alpha: 2.604e+00 1.851e-01 5.000e-01 5.000e+00 ( 1.000e+00) 38 beta: 2.638e-07 3.085e-04 0.000e+00 5.000e+00 ( 1.000e+00) 39 Eb: 7.428e+02 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed 40 tau_norm: 1.000e+00 0.000e+00 0.000e+00 2.500e+00 ( 1.000e+00) fixed 41 redshift: 3.610e-01 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 42 ebl_model: 4.000e+00 0.000e+00 0.000e+00 2.000e+01 ( 1.000e+00) fixed , '\n') [FitMaker]: Results for the Fit Source Name Npred TS Values and (MINOS) errors for PKS1510 ('TS : ', 81.4517104744591) norm : 0.27 +/- 0.06 [ -0.06, + 0.06 ] 1e-10 alpha : 2.60 +/- 0.19 [ -0.17, + 0.18 ] 1e+00 beta : 0.00 +/- 0.00 [ 0.00, + 0.08 ] 1e+00 Eb : 742.81 1e+00 tau_norm : 1.00 1e+00 redshift : 0.36 1e+00 ebl_model : 4.00 1e+00 ('The covariance matrix is :\n', array([[ 3.84235593e-03, -8.64026848e-03, 4.45721575e-07], [-8.64026848e-03, 3.42631416e-02, 3.51962508e-06], [ 4.45721575e-07, 3.51962508e-06, 9.51680064e-08]]))

Source Flux [1.00e+02 MeV, 3.00e+05 MeV] : 4FGL J1418.4-0233 Integral Flux : 1.04e-08 +/- 0.00e+00 ph/cm2/s 4FGL J1433.0-1801 Integral Flux : 7.08e-09 +/- 0.00e+00 ph/cm2/s 4FGL J1503.7-1540 Integral Flux : 6.03e-09 +/- 0.00e+00 ph/cm2/s 4FGL J1505.0+0326 Integral Flux : 3.40e-08 +/- 0.00e+00 ph/cm2/s 4FGL J1510.8-0542 Integral Flux : 2.60e-08 +/- 0.00e+00 ph/cm2/s 4FGL J1512.2+0202 Integral Flux : 1.61e-08 +/- 0.00e+00 ph/cm2/s 4FGL J1517.7-2422 Integral Flux : 7.24e-08 +/- 0.00e+00 ph/cm2/s 4FGL J1544.5-1126 Integral Flux : 1.79e-08 +/- 0.00e+00 ph/cm2/s 4FGL J1549.8-0659 Integral Flux : 8.52e-09 +/- 0.00e+00 ph/cm2/s GalDiffModel Integral Flux : 4.66e-04 +/- 2.70e-05 ph/cm2/s IsoDiffModel Integral Flux : 1.42e-04 +/- 2.05e-05 ph/cm2/s PKS1510 Integral Flux : 3.14e-07 +/- 5.39e-08 ph/cm2/s

[Message]: Save Ebin results in

After this last line, "Preparing submission of fit into energy bins" starts and gives the error I am facing.

davidsanchez commented 3 years ago

Since beta = 0 I wonder is there is not a problem when computing the Ebin value for the preparation. is the tool working with powerlaw and not logparabola?

abhradeep-1996 commented 3 years ago

I have not checked that. I will soon get back to you after trying with power-law. Thanks a lot.

abhradeep-1996 commented 3 years ago

Hi @davidsanchez, Even after using Powerlaw I am getting the same error.

****

*** 8 gtlike --- Run likelihood analysis

****

Fit output with NEWMINUIT: 488804.9949750247 [quality: 3] Fit output with NEWMINUIT: 488804.9948908735 [quality: 3]

****

*** 9 Remove all the weak (TS<1.00) sources

****

[FitMaker]: deleting source 4FGL J1332.6-1256 with TS = -0.04718278115615249 from the model [FitMaker]: deleting source 4FGL J1337.6-1257 with TS = -0.03308165748603642 from the model [FitMaker]: deleting source 4FGL J1339.9-0138 with TS = -0.0017700272146612406 from the model [FitMaker]: deleting source 4FGL J1340.0-1501 with TS = -0.0003813205985352397 from the model [FitMaker]: deleting source 4FGL J1340.8-0409 with TS = -0.009637835435569286 from the model [FitMaker]: deleting source 4FGL J1341.8-2053 with TS = 0.005774950608611107 from the model [FitMaker]: deleting source 4FGL J1344.2-1723 with TS = 0.004564363858662546 from the model [FitMaker]: deleting source 4FGL J1349.5-1131 with TS = -0.018318327609449625 from the model [FitMaker]: deleting source 4FGL J1351.0+0029 with TS = -0.023295827908441424 from the model [FitMaker]: deleting source 4FGL J1351.4-1529 with TS = 0.005106414319016039 from the model [FitMaker]: deleting source 4FGL J1354.3-0206 with TS = -0.04544624825939536 from the model [FitMaker]: deleting source 4FGL J1354.8-1041 with TS = -0.08907121839001775 from the model [FitMaker]: deleting source 4FGL J1356.2-1726 with TS = -0.00015146378427743912 from the model [FitMaker]: deleting source 4FGL J1356.6+0234 with TS = -0.0058215787867084146 from the model [FitMaker]: deleting source 4FGL J1357.5+0127 with TS = -0.035968151642009616 from the model [FitMaker]: deleting source 4FGL J1359.1-1152 with TS = -0.003657888271845877 from the model [FitMaker]: deleting source 4FGL J1359.4+0202 with TS = -0.047188837081193924 from the model [FitMaker]: deleting source 4FGL J1400.0-2415 with TS = -0.00047628278844058514 from the model [FitMaker]: deleting source 4FGL J1400.6-1432 with TS = -0.07473151001613587 from the model [FitMaker]: deleting source 4FGL J1401.2-0915 with TS = -0.05562049651052803 from the model [FitMaker]: deleting source 4FGL J1402.5-1827 with TS = 0.2294903879519552 from the model [FitMaker]: deleting source 4FGL J1404.8+0402 with TS = -0.05497795296832919 from the model [FitMaker]: deleting source 4FGL J1405.3-0640 with TS = -0.04703488864470273 from the model [FitMaker]: deleting source 4FGL J1405.9-1853 with TS = 0.017766353208571672 from the model [FitMaker]: deleting source 4FGL J1406.1-2508 with TS = 0.013963139150291681 from the model [FitMaker]: deleting source 4FGL J1406.4-1654 with TS = 0.05359412415418774 from the model [FitMaker]: deleting source 4FGL J1407.4-0820 with TS = -0.21642160043120384 from the model [FitMaker]: deleting source 4FGL J1408.9-0751 with TS = 0.4846203044289723 from the model [FitMaker]: deleting source 4FGL J1410.1+0202 with TS = -0.11254791682586074 from the model [FitMaker]: deleting source 4FGL J1411.5-0723 with TS = -0.07851669215597212 from the model [FitMaker]: deleting source 4FGL J1415.9-1504 with TS = -0.5757134656887501 from the model [FitMaker]: deleting source 4FGL J1416.1-2417 with TS = -0.062495491467416286 from the model [FitMaker]: deleting source 4FGL J1419.3+0444 with TS = -0.10012476972769946 from the model [FitMaker]: deleting source 4FGL J1419.4-0838 with TS = -30.14560132205952 from the model [FitMaker]: deleting source 4FGL J1420.3+0612 with TS = -0.7107797234784812 from the model [FitMaker]: deleting source 4FGL J1420.9-2431 with TS = -0.5302165753673762 from the model [FitMaker]: deleting source 4FGL J1421.1-1120 with TS = -1.4810180228669196 from the model [FitMaker]: deleting source 4FGL J1424.1-1750 with TS = 0.9125199260888621 from the model [FitMaker]: deleting source 4FGL J1424.2+0433 with TS = -1.193835963262245 from the model [FitMaker]: deleting source 4FGL J1425.4-0119 with TS = 0.6610181507421657 from the model [FitMaker]: deleting source 4FGL J1429.8-0739 with TS = 0.9821309450780973 from the model [FitMaker]: deleting source 4FGL J1429.8-3058 with TS = -1.1142299519851804 from the model [FitMaker]: deleting source 4FGL J1431.1-3120 with TS = -1.1135205717291683 from the model [FitMaker]: deleting source 4FGL J1438.0-3128 with TS = -1.1085676022339612 from the model [FitMaker]: deleting source 4FGL J1439.5-2525 with TS = -1.025706824613735 from the model [FitMaker]: deleting source 4FGL J1440.0-2343 with TS = -0.8145688596414402 from the model [FitMaker]: deleting source 4FGL J1440.9+0609 with TS = -1.7193607148947194 from the model [FitMaker]: deleting source 4FGL J1441.6-1522 with TS = -2.093805378768593 from the model [FitMaker]: deleting source 4FGL J1442.0+0732 with TS = -1.629143452970311 from the model [FitMaker]: deleting source 4FGL J1442.1-2800 with TS = -1.4940652754157782 from the model [FitMaker]: deleting source 4FGL J1442.2+0622 with TS = -1.7662649381672964 from the model [FitMaker]: deleting source 4FGL J1442.7+1200 with TS = -1.5927041773684323 from the model [FitMaker]: deleting source 4FGL J1443.7-0954 with TS = -3.3974955189041793 from the model [FitMaker]: deleting source 4FGL J1445.2-1954 with TS = -1.1914646159857512 from the model [FitMaker]: deleting source 4FGL J1445.9-1626 with TS = -0.1921513294801116 from the model [FitMaker]: deleting source 4FGL J1446.0-3039 with TS = -2.7552227897103876 from the model [FitMaker]: deleting source 4FGL J1446.8-1830 with TS = -1.082256834837608 from the model [FitMaker]: deleting source 4FGL J1447.0-2657 with TS = -2.705702427541837 from the model [FitMaker]: deleting source 4FGL J1449.7-0910 with TS = -4.103773457580246 from the model [FitMaker]: deleting source 4FGL J1450.4+0910 with TS = -3.220675316872075 from the model [FitMaker]: deleting source 4FGL J1450.8-1424 with TS = -3.0599430225556716 from the model [FitMaker]: deleting source 4FGL J1451.5+1415 with TS = -3.1591151595348492 from the model [FitMaker]: deleting source 4FGL J1453.0-1318 with TS = -5.6541840301360935 from the model [FitMaker]: deleting source 4FGL J1459.5+1527 with TS = -3.3692556312307715 from the model [FitMaker]: deleting source 4FGL J1503.7-1540 with TS = 0.035875847563147545 from the model [FitMaker]: deleting source 4FGL J1504.4+1029 with TS = -10.433423016802408 from the model [FitMaker]: deleting source 4FGL J1505.0+0326 with TS = -2.5067064395407215 from the model [FitMaker]: deleting source 4FGL J1506.4-0540 with TS = -7.503941100789234 from the model [FitMaker]: deleting source 4FGL J1506.6+0813 with TS = -7.1273982061538845 from the model [FitMaker]: deleting source 4FGL J1507.1-1901 with TS = -4.334615467814729 from the model [FitMaker]: deleting source 4FGL J1509.8-2906 with TS = -7.9606776010477915 from the model [FitMaker]: deleting source 4FGL J1511.8-0513 with TS = -6.676686772610992 from the model [FitMaker]: deleting source 4FGL J1512.1-2255 with TS = -2.120941399480216 from the model [FitMaker]: deleting source 4FGL J1513.0-3118 with TS = -9.934668803820387 from the model [FitMaker]: deleting source 4FGL J1513.4-2549 with TS = -9.52027996594552 from the model [FitMaker]: deleting source 4FGL J1513.4-3231 with TS = -9.929540937184356 from the model [FitMaker]: deleting source 4FGL J1513.7-1519 with TS = -7.18776526406873 from the model [FitMaker]: deleting source 4FGL J1514.6-2044 with TS = -9.773236632230692 from the model [FitMaker]: deleting source 4FGL J1514.8-0949 with TS = -21.920337482122704 from the model [FitMaker]: deleting source 4FGL J1516.5+0015 with TS = -17.95164467347786 from the model [FitMaker]: deleting source 4FGL J1518.0-2731 with TS = -16.37476376700215 from the model [FitMaker]: deleting source 4FGL J1518.4+0750 with TS = -17.088869789149612 from the model [FitMaker]: deleting source 4FGL J1518.6+0614 with TS = -17.1449495179113 from the model [FitMaker]: deleting source 4FGL J1518.8+0203 with TS = -17.812832938856445 from the model [FitMaker]: deleting source 4FGL J1520.0-0905 with TS = -16.456986023578793 from the model [FitMaker]: deleting source 4FGL J1521.1+0421 with TS = -18.408769365749322 from the model [FitMaker]: deleting source 4FGL J1522.6-2730 with TS = -17.697319971513934 from the model [FitMaker]: deleting source 4FGL J1523.2+0533 with TS = -19.27926300826948 from the model [FitMaker]: deleting source 4FGL J1526.1-0831 with TS = -17.48181006743107 from the model [FitMaker]: deleting source 4FGL J1526.6-2743 with TS = -18.83463413431309 from the model [FitMaker]: deleting source 4FGL J1526.7-1529 with TS = -15.850976601592265 from the model [FitMaker]: deleting source 4FGL J1527.8+1013 with TS = -19.45063897536602 from the model [FitMaker]: deleting source 4FGL J1528.2-2905 with TS = -17.7270847709151 from the model [FitMaker]: deleting source 4FGL J1528.5-2240 with TS = -18.443796607432887 from the model [FitMaker]: deleting source 4FGL J1530.0-1522 with TS = -20.14630087907426 from the model [FitMaker]: deleting source 4FGL J1530.5-3026 with TS = -18.13530919898767 from the model [FitMaker]: deleting source 4FGL J1531.6+0406 with TS = -19.16272693348583 from the model [FitMaker]: deleting source 4FGL J1534.3-3312 with TS = -18.50864328769967 from the model [FitMaker]: deleting source 4FGL J1534.8+0131 with TS = -20.31474939547479 from the model [FitMaker]: deleting source 4FGL J1535.3-3135 with TS = -22.604830294381827 from the model [FitMaker]: deleting source 4FGL J1536.8-3155 with TS = -22.600193538120948 from the model [FitMaker]: deleting source 4FGL J1537.9-1344 with TS = -23.99506931635551 from the model [FitMaker]: deleting source 4FGL J1538.9+0425 with TS = -17.229344128863886 from the model [FitMaker]: deleting source 4FGL J1539.1+1008 with TS = -23.510000391979702 from the model [FitMaker]: deleting source 4FGL J1539.7-1127 with TS = -3.785195583710447 from the model [FitMaker]: deleting source 4FGL J1540.7+1449 with TS = -24.520194033742882 from the model [FitMaker]: deleting source 4FGL J1541.7+1413 with TS = -24.515706458943896 from the model [FitMaker]: deleting source 4FGL J1541.9-2915 with TS = -24.359692086698487 from the model [FitMaker]: deleting source 4FGL J1543.6+0452 with TS = -25.338525953469798 from the model [FitMaker]: deleting source 4FGL J1543.6-0244 with TS = -22.788386102183722 from the model [FitMaker]: deleting source 4FGL J1544.2-2554 with TS = -27.303646102547646 from the model [FitMaker]: deleting source 4FGL J1544.5-1126 with TS = -5.573418781044893 from the model [FitMaker]: deleting source 4FGL J1545.8-2336 with TS = -32.295088520273566 from the model [FitMaker]: deleting source 4FGL J1546.0+0819 with TS = -32.41764909692574 from the model [FitMaker]: deleting source 4FGL J1546.1-1003 with TS = -26.326419832766987 from the model [FitMaker]: deleting source 4FGL J1546.8-3244 with TS = -31.729724588920362 from the model [FitMaker]: deleting source 4FGL J1547.3-1531 with TS = -32.347653151955456 from the model [FitMaker]: deleting source 4FGL J1547.3-2802 with TS = -32.14562020939775 from the model [FitMaker]: deleting source 4FGL J1548.8-2250 with TS = -33.77411496115383 from the model [FitMaker]: deleting source 4FGL J1549.8-0659 with TS = -12.8806197111262 from the model [FitMaker]: deleting source 4FGL J1549.8-3044 with TS = -34.95192214904819 from the model [FitMaker]: deleting source 4FGL J1550.7+0528 with TS = -35.47673192061484 from the model [FitMaker]: deleting source 4FGL J1550.8-0822 with TS = -28.75547376088798 from the model [FitMaker]: deleting source 4FGL J1550.8-1750 with TS = -40.22569047193974 from the model [FitMaker]: deleting source 4FGL J1552.0+0850 with TS = -37.30626433016732 from the model [FitMaker]: deleting source 4FGL J1553.5-3118 with TS = -37.23272131604608 from the model [FitMaker]: deleting source 4FGL J1553.6+1257 with TS = -37.405601147795096 from the model [FitMaker]: deleting source 4FGL J1553.6-2422 with TS = -38.447705400176346 from the model [FitMaker]: deleting source 4FGL J1554.4-1215 with TS = -40.82508387067355 from the model [FitMaker]: deleting source 4FGL J1555.7+1111 with TS = -38.581499801715836 from the model [FitMaker]: deleting source 4FGL J1555.7-2908 with TS = -38.445685231592506 from the model [FitMaker]: deleting source 4FGL J1557.9-0001 with TS = -37.26235058088787 from the model [FitMaker]: deleting source 4FGL J1557.9-1404 with TS = -41.6021245616721 from the model [FitMaker]: deleting source 4FGL J1559.8-2525 with TS = -41.38403822632972 from the model [FitMaker]: deleting source 4FGL J1600.9-3054 with TS = -39.9204228798626 from the model [FitMaker]: deleting source 4FGL J1602.9-1928 with TS = -41.672173132770695 from the model [FitMaker]: deleting source 4FGL J1603.6-0451 with TS = -35.412631890154444 from the model [FitMaker]: deleting source 4FGL J1603.8+1104 with TS = -42.668103146832436 from the model [FitMaker]: deleting source 4FGL J1605.1-1140 with TS = -45.864348266855814 from the model [FitMaker]: deleting source 4FGL J1608.0-2038 with TS = -45.13055558933411 from the model [FitMaker]: deleting source 4FGL J1608.4+0055 with TS = -44.739526169491 from the model [FitMaker]: deleting source 4FGL J1608.7+1029 with TS = -44.21675104775932 from the model [FitMaker]: deleting source 4FGL J1612.4+0409 with TS = -45.72495644376613 from the model [FitMaker]: deleting source 4FGL J1613.3-1907 with TS = -45.63142455462366 from the model [FitMaker]: deleting source 4FGL J1614.5-2230 with TS = -45.692146487534046 from the model [FitMaker]: deleting source 4FGL J1615.3-1512 with TS = -45.67846902215388 from the model [FitMaker]: deleting source 4FGL J1616.9-2257 with TS = -44.356941077974625 from the model [FitMaker]: deleting source 4FGL J1617.2-2535 with TS = -44.361602918594144 from the model [FitMaker]: deleting source 4FGL J1617.3-1513 with TS = -45.90691906574648 from the model [FitMaker]: deleting source 4FGL J1621.0-2625 with TS = -44.516300047631375 from the model [FitMaker]: deleting source 4FGL J1621.7-1103 with TS = -45.64100295235403 from the model [FitMaker]: deleting source 4FGL J1623.0-0315 with TS = -46.448418434127234 from the model [FitMaker]: deleting source 4FGL J1623.7-2315c with TS = -45.164457448525354 from the model [FitMaker]: deleting source 4FGL J1625.1-0020 with TS = -45.19735654105898 from the model [FitMaker]: deleting source 4FGL J1625.3-2338 with TS = -45.212698179646395 from the model [FitMaker]: deleting source 4FGL J1625.7-2527 with TS = -45.22826033877209 from the model [FitMaker]: deleting source 4FGL J1626.9-2431e with TS = -45.35340453707613 from the model [FitMaker]: deleting source 4FGL J1627.7+0251 with TS = -45.66326837451197 from the model [FitMaker]: deleting source 4FGL J1630.1-1049 with TS = -46.99712919967715 from the model [FitMaker]: deleting source 4FGL J1632.8-1048 with TS = -46.83025384659413 from the model [FitMaker]: deleting source 4FGL J1634.7+0235 with TS = -45.867026975611225 from the model [FitMaker]: deleting source 4FGL J1636.5-0454 with TS = -45.69732435862534 from the model [FitMaker]: deleting source 4FGL J1638.0+0042 with TS = -45.87123578169849 from the model [FitMaker]: deleting source 4FGL J1641.9-0621 with TS = -45.62718513002619 from the model [FitMaker]: deleting source 4FGL J1643.5-0646 with TS = -45.78288045828231 from the model [FitMaker]: deleting source 4FGL J1646.0-0942 with TS = -45.80861942563206 from the model [FitMaker]: deleting source 4FGL J1646.7-1330 with TS = -45.826185922371224 from the model [FitMaker]: deleting source 4FGL J1647.2-0154 with TS = -45.99587436916772 from the model [FitMaker]: deleting source 4FGL J1648.1-1547 with TS = -45.83019928005524 from the model [FitMaker]: keeping source 4FGL J1418.4-0233 with TS=4.69e+01 [FitMaker]: keeping source 4FGL J1427.4-1823 with TS=7.33e+00 [FitMaker]: keeping source 4FGL J1433.0-1801 with TS=1.44e+00 [FitMaker]: keeping source 4FGL J1440.0-1530 with TS=1.97e+00 [FitMaker]: keeping source 4FGL J1441.4-1934 with TS=1.12e+00 [FitMaker]: keeping source 4FGL J1445.0-0326 with TS=1.30e+01 [FitMaker]: keeping source 4FGL J1458.8-2120 with TS=2.00e+00 [FitMaker]: keeping source 4FGL J1510.8-0542 with TS=4.73e+01 [FitMaker]: keeping source 4FGL J1512.2+0202 with TS=4.27e+01 [FitMaker]: keeping source 4FGL J1517.7-2422 with TS=1.33e+01 [FitMaker]: keeping source 4FGL J1520.8-0348 with TS=9.86e+00 [FitMaker]: keeping source 4FGL J1532.7-1319 with TS=7.61e+01 [FitMaker]: keeping source 4FGL J1549.5+0236 with TS=1.52e+01 [FitMaker]: keeping source GalDiffModel with TS=6.83e+03 [FitMaker]: keeping source IsoDiffModel with TS=4.88e+02 [FitMaker]: keeping source PKS1510 with TS=1.83e+03

****

*** 10 Re-optimize ---

****

Fit output with NEWMINUIT: 488835.58915209485 [quality: 3] [FitMaker]: Fit with gtlike performed

****

*** 11 PlotSED --- Generate SED plot

****

[Result]: Decorrelation energy : 3.62e+02 MeV [Result]: Diffential flux at the Decorrelation energy : 2.68e-10 +/- 9.55e-12 ph/cm2/s/MeV [Result]: SED value at the Decorrelation energy : 5.63e-11 +/- 2.00e-12 erg/cm2/s

****

*** 12 Results --- Print results of the fit

****

(4FGL J1418.4-0233 Spectrum: LogParabola 0 norm: 7.394e-01 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-12) fixed 1 alpha: 1.646e+00 0.000e+00 5.000e-01 5.000e+00 ( 1.000e+00) fixed 2 beta: 7.432e-02 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 3 Eb: 1.836e+03 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1427.4-1823 Spectrum: PowerLaw 4 Prefactor: 3.593e-01 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-13) fixed 5 Index: -1.959e+00 0.000e+00 -6.000e+00 -5.000e-01 ( 1.000e+00) fixed 6 Scale: 3.204e+03 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1433.0-1801 Spectrum: LogParabola 7 norm: 1.251e+00 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-12) fixed 8 alpha: 2.491e+00 0.000e+00 5.000e-01 5.000e+00 ( 1.000e+00) fixed 9 beta: 2.664e-01 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 10 Eb: 7.345e+02 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1440.0-1530 Spectrum: PowerLaw 11 Prefactor: 1.537e+00 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-13) fixed 12 Index: -2.191e+00 0.000e+00 -6.000e+00 -5.000e-01 ( 1.000e+00) fixed 13 Scale: 2.233e+03 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1441.4-1934 Spectrum: LogParabola 14 norm: 9.894e-01 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-14) fixed 15 alpha: 1.315e+00 0.000e+00 5.000e-01 5.000e+00 ( 1.000e+00) fixed 16 beta: 5.084e-01 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 17 Eb: 5.129e+03 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1445.0-0326 Spectrum: PowerLaw 18 Prefactor: 4.228e-01 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-13) fixed 19 Index: -1.818e+00 0.000e+00 -6.000e+00 -5.000e-01 ( 1.000e+00) fixed 20 Scale: 4.007e+03 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1458.8-2120 Spectrum: LogParabola 21 norm: 2.538e+00 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-13) fixed 22 alpha: 1.737e+00 0.000e+00 5.000e-01 5.000e+00 ( 1.000e+00) fixed 23 beta: 4.947e-01 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 24 Eb: 1.487e+03 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1510.8-0542 Spectrum: LogParabola 25 norm: 2.736e+00 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-12) fixed 26 alpha: 2.385e+00 0.000e+00 5.000e-01 5.000e+00 ( 1.000e+00) fixed 27 beta: 1.082e-01 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 28 Eb: 8.653e+02 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1512.2+0202 Spectrum: LogParabola 29 norm: 2.310e+00 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-12) fixed 30 alpha: 2.013e+00 0.000e+00 5.000e-01 5.000e+00 ( 1.000e+00) fixed 31 beta: 1.158e-01 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 32 Eb: 9.521e+02 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1517.7-2422 Spectrum: LogParabola 33 norm: 1.037e+00 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-11) fixed 34 alpha: 2.078e+00 0.000e+00 5.000e-01 5.000e+00 ( 1.000e+00) fixed 35 beta: 2.835e-02 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 36 Eb: 8.241e+02 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1520.8-0348 Spectrum: LogParabola 37 norm: 9.149e-01 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-13) fixed 38 alpha: 1.505e+00 0.000e+00 5.000e-01 5.000e+00 ( 1.000e+00) fixed 39 beta: 2.065e-01 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 40 Eb: 3.291e+03 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1532.7-1319 Spectrum: LogParabola 41 norm: 7.414e-01 1.058e-01 0.000e+00 1.000e+04 ( 1.000e-11) 42 alpha: 2.030e+00 0.000e+00 5.000e-01 5.000e+00 ( 1.000e+00) fixed 43 beta: 1.043e-01 0.000e+00 0.000e+00 5.000e+00 ( 1.000e+00) fixed 44 Eb: 8.468e+02 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

4FGL J1549.5+0236 Spectrum: PowerLaw 45 Prefactor: 2.659e+00 0.000e+00 0.000e+00 1.000e+04 ( 1.000e-12) fixed 46 Index: -2.420e+00 0.000e+00 -6.000e+00 -5.000e-01 ( 1.000e+00) fixed 47 Scale: 8.074e+02 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed

GalDiffModel Spectrum: ConstantValue 48 Value: 9.405e-01 1.700e-02 1.000e-02 1.000e+01 ( 1.000e+00)

IsoDiffModel Spectrum: FileFunction 49 Normalization: 1.157e+00 5.375e-02 1.000e-03 1.000e+03 ( 1.000e+00)

PKS1510 Spectrum: PowerLaw 50 Prefactor: 4.779e-01 2.102e-02 0.000e+00 1.000e+04 ( 1.000e-10) 51 Index: -2.399e+00 3.605e-02 -6.000e+00 -5.000e-01 ( 1.000e+00) 52 Scale: 7.428e+02 0.000e+00 3.000e+01 3.000e+05 ( 1.000e+00) fixed , '\n') [FitMaker]: Results for the Fit Source Name Npred TS Values and (MINOS) errors for PKS1510 ('TS : ', 1873.8933641960612) Prefactor : 0.48 +/- 0.02 [ -0.02, + 0.02 ] 1e-10 Index : -2.40 +/- 0.04 [ -0.04, + 0.04 ] 1e+00 Scale : 742.81 1e+00 ('The covariance matrix is :\n', array([[0.00044201, 0.00044577], [0.00044577, 0.00129992]]))

Source Flux [1.00e+02 MeV, 3.00e+05 MeV] : 4FGL J1418.4-0233 Integral Flux : 1.04e-08 +/- 0.00e+00 ph/cm2/s 4FGL J1427.4-1823 Integral Flux : 3.34e-09 +/- 0.00e+00 ph/cm2/s 4FGL J1433.0-1801 Integral Flux : 7.08e-09 +/- 0.00e+00 ph/cm2/s 4FGL J1440.0-1530 Integral Flux : 1.17e-08 +/- 0.00e+00 ph/cm2/s 4FGL J1441.4-1934 Integral Flux : 1.32e-10 +/- 0.00e+00 ph/cm2/s 4FGL J1445.0-0326 Integral Flux : 4.24e-09 +/- 0.00e+00 ph/cm2/s 4FGL J1458.8-2120 Integral Flux : 1.22e-09 +/- 0.00e+00 ph/cm2/s 4FGL J1510.8-0542 Integral Flux : 2.60e-08 +/- 0.00e+00 ph/cm2/s 4FGL J1512.2+0202 Integral Flux : 1.61e-08 +/- 0.00e+00 ph/cm2/s 4FGL J1517.7-2422 Integral Flux : 7.24e-08 +/- 0.00e+00 ph/cm2/s 4FGL J1520.8-0348 Integral Flux : 1.48e-09 +/- 0.00e+00 ph/cm2/s 4FGL J1532.7-1319 Integral Flux : 4.40e-08 +/- 6.28e-09 ph/cm2/s 4FGL J1549.5+0236 Integral Flux : 2.94e-08 +/- 0.00e+00 ph/cm2/s GalDiffModel Integral Flux : 4.90e-04 +/- 8.86e-06 ph/cm2/s IsoDiffModel Integral Flux : 1.42e-04 +/- 6.60e-06 ph/cm2/s PKS1510 Integral Flux : 4.20e-07 +/- 1.72e-08 ph/cm2/s

[Message]: Save Ebin results in

****

Preparing submission of fit into energy bins

****

('Emin = 100.0 MeV', 'Emax = 300000.0 MeV', 'Nbins = 6') Debug: read energy bins: logE Energy bins (before energy cuts): [1.00000000e+02 3.79769610e+02 1.44224957e+03 5.47722558e+03 2.08008382e+04 7.89952623e+04 3.00000000e+05] Energy bins (after energy cuts): [1.00000000e+02 3.79769610e+02 1.44224957e+03 5.47722558e+03 2.08008382e+04 7.89952623e+04 3.00000000e+05] [Message]: Submitting # 0 at energy 194 Traceback (most recent call last): File "/home/hegro/enrico/bin/enrico_sed", line 48, in liste = np.genfromtxt(sys.argv[1],dtype="str",unpack=True) File "/home/hegro/anaconda3/envs/fermi/lib/python3.7/site-packages/numpy/lib/npyio.py", line 2068, in genfromtxt raise ValueError(errmsg) ValueError: Some errors were detected ! Line #9 (got 1 columns instead of 3) Line #20 (got 1 columns instead of 3) Line #29 (got 1 columns instead of 3) Line #37 (got 1 columns instead of 3) Line #43 (got 1 columns instead of 3) Line #49 (got 1 columns instead of 3) Line #54 (got 1 columns instead of 3) Line #70 (got 1 columns instead of 3) Line #79 (got 1 columns instead of 3) Line #85 (got 1 columns instead of 3) Line #101 (got 1 columns instead of 3) Line #111 (got 1 columns instead of 3) Line #123 (got 1 columns instead of 3) Line #142 (got 1 columns instead of 3) Line #158 (got 1 columns instead of 3) Line #166 (got 1 columns instead of 3) Line #181 (got 1 columns instead of 3) Line #195 (got 1 columns instead of 3) Line #206 (got 1 columns instead of 3) Line #212 (got 1 columns instead of 3) Line #222 (got 1 columns instead of 3) Line #226 (got 1 columns instead of 3)

During handling of the above exception, another exception occurred:

Traceback (most recent call last): File "/home/hegro/enrico/bin/enrico_sed", line 55, in sed(config,infile) File "/home/hegro/enrico/bin/enrico_sed", line 13, in sed run(infile) File "/home/hegro/enrico/enrico/RunGTlike.py", line 262, in run energybin.RunEbin(folder,Nbin,Fit,FitRunner,sedresult) File "/home/hegro/enrico/enrico/energybin.py", line 209, in RunEbin configfiles = PrepareEbin(Fit, FitRunner,sedresult) File "/home/hegro/enrico/enrico/energybin.py", line 202, in PrepareEbin config.write(open(config['out'] + '/' +filename, 'w')) #save the config file in a ascii file File "/home/hegro/enrico/enrico/extern/configobj.py", line 2098, in write outfile.write(output_bytes) TypeError: write() argument must be str, not bytes

davidsanchez commented 3 years ago

I will try to reproduce the error

davidsanchez commented 3 years ago

I am working on it. it tooks time since our cluster was down. d

davidsanchez commented 3 years ago

Hi I am not able to reproduce the problem you have; I am not using the last fermitools but I will update and retry`

d

abhradeep-1996 commented 3 years ago

Thanks, @davidsanchez for your kind effort. I am also trying to solve it but still the same error persists.

Marcas98 commented 3 years ago

Hi,

I have the same problem. Is there a solution to this problem?

davidsanchez commented 3 years ago

Hi I never been able to reproduce this bug. could you send me your config files? david

Marcas98 commented 3 years ago

Thank you for your prompt reply. Of course, I am running the sed for mrk 421 with NumEnergyBins = 7. In the Ebin # / folder is created the .confg file for the 0th energy but is empty.

The file mrk421.conf :

Default config and validation file for Enrico.

#

Besides providing default options it is also used

to check the user config file.

Options without default options here must be

specified in the user config file

Folder where the output will be stored

out = /home/marisol/Desktop/sed_mkr421-prueba/datos

verbosity

verbose = yes

Overwrite existing output files. Use with caution

clobber = yes

Submit the job to a cluster?

Submit = no

[target] name = Mrk421 ra = 166.113808 dec = 38.20883287 redshift = 0.031 ebl_model = 4 spectrum = PowerLaw

0=Kneiske, 1=Primack05, 2=Kneiske_HighUV, 3=Stecker05, 4=Franceschini, 5=Finke, 6=Gilmore, 10=Dominguez11

# full list http://www-glast.stanford.edu/cgi-bin/viewcvs/celestialSources/eblAtten/eblAtten/EblAtten.h?view=markup
fit_tau = no

[space] xref = 166.113808 yref = 38.20883287 rad = 10.0 binsz = 0.1 coordsys = CEL proj = AIT phibins = 0

[file] spacecraft = sc.fits event = fotones.dat xml = /home/marisol/Desktop/sed_mkr421-prueba/datos/Mrk421_PowerLaw_model.xml tag = LAT_Analysis

keep track of the parent config during nested operations (e.g. energy/time bins)

parent_config = ""

[time] tmin = 239557417.192 tmax = 271093418.192 file = "" type = MET

[energy] emin = 2000.0 emax = 300000.0 enumbins_per_decade = 10 decorrelation_energy = no

[event] irfs = CALDB evclass = 128 evtype = 3

[analysis] zmax = 100

General analysis options

likelihood = binned
# Correct energy dispersion?
EnergyDispersion = yes
ComputeDiffrsp = yes
roicut = no
# cuts applied during the first coarse bin selection:
evtroicuts = yes
evttimecuts = yes
filter = (DATA_QUAL>0)&&(LAT_CONFIG==1)
# should we keep the srcmaps for all sources in the srcMap file?
# this should speed up future fits, at the cost of disk space.
keep_all_srcmaps = no

[environ]

Analysis environment configuration

# Can also be done via shell environment variables
FERMI_DATA_DIR = ""
FERMI_CATALOG_DIR = ""
FERMI_CATALOG = ""
FERMI_DIFFUSE_DIR = ""
FERMI_PREPROCESSED_DIR = ""

[fitting] optimizer = MINUIT ftol = 1e-06

if source_ts < min_source_TS in the fit, the source is removed from the model

min_source_TS = 1.0

[model]

The following options determine the xml model

diffuse_gal_dir = ""
diffuse_iso_dir = ""
diffuse_gal = ""
diffuse_iso = ""
# user points sources for diffuse catalog sources
# freeze spectral parameters for weak and far away sources:
min_significance_catalog = 4.0
min_significance_free = 25.0
max_radius = 5.0
# Add all source in a radius of analyse ROI + this radius
max_roi = 10.0
# Add gaussian noise to the spectral parameters of free sources (may help during the fit)
parameters_noise = 0.0

[Spectrum]

Generates fits files or not?

FitsGeneration = yes
#Generates plots (SED, model map)
ResultPlots = yes
# Plot (update) the parent config related plots during energy bin production
ResultParentPlots = no
#Freeze the spectral index of the source. Has no implication if 0 (Left free to vary)
FrozenSpectralIndex = 0.0

[UpperLimit]

Assumed Spectral index

SpectralIndex = 2.0
# UL method could be Profile or Integral (provided by the fermi collaboration).
#Poisson is base on the Feldman-Cousins method for low signal. Only 95 % yet available
Method = Profile
envelope = no
#Compute an UL if the TS of the sources is <TSlimit
TSlimit = 25.0
# Confidence level for the Ul computation
cl = 0.95

[LightCurve]

Generates fits files or not?

FitsGeneration = yes
#Number of points for the LC
NLCbin = 20
#Index for the power law. Left free to vary if 0
SpectralIndex = 2.0
MakeConfFile = yes
#Bayesian blocks
BayesianBlocks = no
#Compute Variability index as in the 2FGL.
ComputeVarIndex = yes
#Compute an UL if the TS of the sources is <TSLightCurve
TSLightCurve = 9.0
#Generates control plots
DiagnosticPlots = yes
# Plot (update) the parent config related plots during time bin production
DiagnosticParentPlots = no

[BayesianBlocks]

Generates fits files or not?

FitsGeneration = yes
#False alarm probability
p0 = 0.01
#Index for the power law. Left free to vary if 0
SpectralIndex = 2.0
MakeConfFile = yes
#Compute an UL if the TS of the sources is <TSLightCurve
TSLightCurve = 9.0
#Generates control plots
DiagnosticPlots = yes
# Plot (update) the parent config related plots during time bin production
DiagnosticParentPlots = no

[FoldedLC]

Number of bins for the orbitally folded LC

NLCbin = 10
#Epoch of phase=0 in MJD, equal to tmin is 0
epoch = 0.0
#Orbital period in days
Period = 0.0

[AppLC]

Generates fits files or not?

FitsGeneration = yes
#Spectral index for the exposure calculation
index = 2.0
#Apperture radius
rad = 1.0
#Number of bins
NLCbin = 10
#bin form data or frozen bin size
binsFromData = no
#minimum energy for the apperture lightcurve, if -1 use the one define in energy section
emin = -1.0
emax = -1.0

[Ebin]

Generates fits files or not?

FitsGeneration = yes
NumEnergyBins = 7
#Compute an UL if the TS of the sources is <TSEnergyBins
TSEnergyBins = 9.0
# How to generate the Ebins
# - logE: log scaled bins
# - TS: similar TS per bin
# - mix: half-way between log and TS.
# - [ E1, E2, E3, E4, ..., EN ]: custom binning. 
# - default is logE
DistEbins = logE

[TSMap]

Re-fit before computing the TS map

Re-Fit = no
#Numbers of pixel in x and y
npix = 10
#Remove or not the target from the model
RemoveTarget = yes
#Generate the TS map pixel by pixel or by grouping the pixels by row.
#(reduce the numbers of jobs but each job is longer)
method = row

[findsrc]

Generates fits files or not?

FitsGeneration = yes
#Reoptimize before
Refit = yes

[srcprob]

Generates fits files or not?

FitsGeneration = yes
#radius for the computation
rad = 1.0
# list of sources
srclist = ""
# number of photons to print
numberPhoton = 10

[Contours] parname1 = Prefactor parname2 = Index

[ComponentAnalysis]

EUnBinned to the energy (MeV) where

# binned and unbinned analysis should be split
# disabled if -1
EUnBinned = -1.0
# Divide the analysis in FrontBack classes
FrontBack = no
# Divide the analysis in PSF classes
PSF = no
# Divide the analysis in EDISP classes
EDISP = no
# Divide the analysis in EDISP classes
FGL4 = no
Sahakyan86 commented 3 years ago

Hi,

I have the same error, did you manage to solve it ?

****

Preparing submission of fit into energy bins

****

('Emin = 442.894 MeV', 'Emax = 300000.0 MeV', 'Nbins = 3') Debug: read energy bins: mix Energy bins (before energy cuts): [ 442.894 3101.56570034 22704.03766592 300000. ] Energy bins (after energy cuts): [ 442.894 3101.56570034 22704.03766592 300000. ] [Message]: Submitting # 0 at energy 1172 Traceback (most recent call last): File "/home/narek/enrico/bin/enrico_sed", line 48, in liste = np.genfromtxt(sys.argv[1],dtype="str",unpack=True) File "/home/narek/anaconda3/envs/fermi/lib/python3.7/site-packages/numpy/lib/npyio.py", line 2122, in genfromtxt raise ValueError(errmsg) ValueError: Some errors were detected ! Line #6 (got 1 columns instead of 3) Line #15 (got 1 columns instead of 3) Line #24 (got 1 columns instead of 3) Line #31 (got 1 columns instead of 3) Line #37 (got 1 columns instead of 3) Line #43 (got 1 columns instead of 3) Line #48 (got 1 columns instead of 3) Line #59 (got 1 columns instead of 3) Line #66 (got 1 columns instead of 3) Line #71 (got 1 columns instead of 3) Line #82 (got 1 columns instead of 3) Line #88 (got 1 columns instead of 3) Line #95 (got 1 columns instead of 3) Line #106 (got 1 columns instead of 3) Line #116 (got 1 columns instead of 3) Line #121 (got 1 columns instead of 3) Line #130 (got 1 columns instead of 3) Line #136 (got 1 columns instead of 3) Line #142 (got 1 columns instead of 3) Line #146 (got 1 columns instead of 3) Line #152 (got 1 columns instead of 3) Line #156 (got 1 columns instead of 3)

During handling of the above exception, another exception occurred:

Traceback (most recent call last): File "/home/narek/enrico/bin/enrico_sed", line 55, in sed(config,infile) File "/home/narek/enrico/bin/enrico_sed", line 13, in sed run(infile) File "/home/narek/enrico/enrico/RunGTlike.py", line 261, in run energybin.RunEbin(folder,Nbin,Fit,FitRunner,sedresult) File "/home/narek/enrico/enrico/energybin.py", line 209, in RunEbin configfiles = PrepareEbin(Fit, FitRunner,sedresult) File "/home/narek/enrico/enrico/energybin.py", line 202, in PrepareEbin config.write(open(config['out'] + '/' +filename, 'w')) #save the config file in a ascii file File "/home/narek/enrico/enrico/extern/configobj.py", line 2098, in write outfile.write(output_bytes) TypeError: write() argument must be str, not bytes

Sahakyan86 commented 3 years ago

Hi,

If you change config.write(open(config['out'] + '/' +filename, 'w')) with config.write(open(config['out'] + '/' +filename, 'wb')) it works without a problem.

Marcas98 commented 3 years ago

Hi,

I confirm that it works without problem by correcting what you mention in the file /home/user/enrico/enrico/energybin.py, thank you so much! ('w' by 'wb')

davidsanchez commented 3 years ago

Hi thanks a lot. I'll made a fix then