search

gatorbotics1700 / Robot-2016

Code for 2016 Stronghold robot.
http://gatorbotics.org/
1 stars 2 forks source link

Rewire CAN #6

Closed eburnette1 closed 8 years ago

eburnette1 commented 8 years ago

this is self explanatory. it should look less terrible.

doubletissue commented 8 years ago

It should also use proper connectors. I think PWM cables might be the way to go. Each Talon would have one male and one female end, so they can be daisy chained easily. You can remove the center pin which gives a nice space to zip tie and make sure they never come undone.

eburnette1 commented 8 years ago

we've done the pwm cable thang for all of the talons except for the one claire's using for the shooter... unfortunately for us we still have to do that one + the ones that came today. so there will be more soldering in our future. yay.

gatorbotics commented 8 years ago

so the PWM stuff works awesomely! yay! now, we just have to solder claire's talon and some others that we got in the mail.

eburnette1 commented 8 years ago

finished soldering claire's talon and tested them.

christinecho commented 8 years ago

we actually still need to do one more

On Fri, Feb 12, 2016 at 12:04 PM, eburnette1 notifications@github.com wrote:

Closed #6 https://github.com/gatorbotics1700/Robot-2016/issues/6.

— Reply to this email directly or view it on GitHub https://github.com/gatorbotics1700/Robot-2016/issues/6#event-549000462.

Christine Cho Class of 2017

eburnette1 commented 8 years ago

oh frick okay we can do that tonight if anyones there

eburnette1 commented 8 years ago

wait @christinecho where is the other talon? bc i can try to do it after school // track down mr cummings and make him open the lab for me

doubletissue commented 8 years ago

Is this done? We have enough for the robot but we should do all of the Talons we have.