search

gavanderhoorn / fanuc_driver_exp

An alternative - experimental - Fanuc robot driver for ROS-Industrial
Apache License 2.0
28 stars 17 forks source link

Failed to connect to server, rc: -1. Error: 'Connection refused' (errno: 111) #20

Closed jediofgever closed 5 years ago

jediofgever commented 5 years ago

Hello , when i try to execute the plan I did with Move-it on real robot, My program stuck at the error given in the title , does anyone met this problem ? on real robot I can successfully ping to my robot IP any help is appreciated , Thank you

gavanderhoorn commented 5 years ago

First thing to check: are you (attempting to) use a wireless connection with the robot? If there is any wireless segment between you and the robot (ie: robot cabled with switch/router, but laptop->router is wireless), that will not work reliably.

If that's not it: please provide much more information. Versions of components involved (both hw and software), network topology, how you start things up (ie: which .launch files, in which order), how you start the programs on the Fanuc controller and last but not least: a wireshark capture of network traffic between the ROS PC and the controller while you experience the problem.

jediofgever commented 5 years ago

Thank you for your amazingly fast reply, it turns out to be something related to teach pendant, I am very new to the this robots hardware, now it is solved and I can sucessfully plan and execute on real robot again thank you :)

gavanderhoorn commented 5 years ago

Good to hear that you got things to work.

I am very new to the this robots hardware,

let me play "grandpa" here a bit and insist/suggest/require that you get some training. These robots can be highly dangerous if used in an unusual way, especially when using external control (like ROS, but there are other methods as well).

For your own safety, but perhaps also to avoid running into the kind of issues you reported in your OP, you may want to look into getting at least a basic training with Fanuc robots.

</end_of_grandpa_mode>

jediofgever commented 5 years ago

You are absolutely right on that, I have worked on this field but haven't getting enough experience on the hardware and in the project we do have people with experience on fanuc robots, you are right I should get a training session for this specific robot. I deeply thank you for your concern and guidance, really appreciate it🙏 And just as a side note; since I am working with the very same robot, for this repository are there open fields waiting for conribution ? I would be much happy if there is a field that I am capable to contribute

gavanderhoorn commented 5 years ago

for this repository are there open fields waiting for conribution ?

That depends a bit on what skills you have: are you proficient in Karel & TP?

jediofgever commented 5 years ago

oh unfortunately not that proficient in Karel & TP, what I actually meant was contribution to general development related ROS-fanuc software, I am proficient in C++, ROS, Gazebo and maybe a little python

gavanderhoorn commented 5 years ago

The main issue tracker would be here: ros-industrial/fanuc/issues. One outstanding issue that may be something to take a look at would be ros-industrial/fanuc#245.

You are also very much welcome to pick any of the others, although driver development itself has somewhat stopped due to Stream Motion becoming available.

That will not work for older controllers, or controllers without the option though, so development of an improved driver for R-30iB and older would still be of interest as well.