search

gazoodle / gecko-home-assistant

Home Assistant integration for spas equipped with Gecko Alliance in.touch2 modules
MIT License
68 stars 23 forks source link

Unable to control ozone pump #55

Open M0LTE opened 2 years ago

M0LTE commented 2 years ago

Hi, great integration, thanks. Unable to control my ozone pump - blower and jets are just fine. This maps to the 'bubbles' button in the in.touch 2 app. There is just no switch entity for it, just a binary_sensor. Any ideas please?

gazoodle commented 2 years ago

There seems to be quite a few issues around ozone and circulation pump. On my current tub I have a waterfall that is also the circulation pump (and the o3 pump too). I can turn this on or off from the integration or the app when the spa is idle, but if any other pump is active then the circulation pump comes on automatically and can't be turned off no matter what. This is true of the integration, the iOS app and the spa control panel.

I think I need to do some more thinking around these items, but thanks for giving me the data. Can you also let me know the model of spapack and the version numbers too so I can see what the underlying configuration is set to?

M0LTE commented 2 years ago

Sure, where do I find that info please?

I also see the same behaviour- that's expected and normal- we like to have just the O3 pump on by itself a lot of the time.

Thanks.

gazoodle commented 2 years ago

Settings > Device & Services > Integrations Click on the Gecko integration and select the device On the device page, you should see Device Info

mine shows


inXM 186 v3.0
by Gecko Alliance
Firmware: SpaPack:v33.00 Config:9 Log:9
Hardware: EN:88 v15.0 CO:89 v11.0