search

gcfavorites / wiixplorer

Automatically exported from code.google.com/p/wiixplorer
1 stars 0 forks source link

Code Dump on "Reload" #453

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1.Open wiixplorer
2.If network shares not yet visible in device list then:
Click the icon to select device repetaedly until it hangs.
3.Wait for code dump.

What is the expected output? What do you see instead?
I expect the list to refresh, and not the wii to hang.

What version of the product are you using? On what operating system?
wiixplorer r206, IOS 58, HBC 1.08, 4.2E

Original issue reported on code.google.com by svi...@gmail.com on 1 Dec 2010 at 11:42

GoogleCodeExporter commented 9 years ago 
Please try this test with IOS202 as boot up IOS if you can. Just need something 
confirmed.

Original comment by dimok...@hotmail.de on 1 Dec 2010 at 5:25

GoogleCodeExporter commented 9 years ago 
I updated to r207 today, but with this release I didn't come across this 
error... Neither with IOS 58 nor 202. So I guess it's fixed.

But now, I got a code dump when i clicked "reload" in the Start Menu.

Original comment by svi...@gmail.com on 1 Dec 2010 at 7:12

GoogleCodeExporter commented 9 years ago 
I heard that from several people now. Though I could not reproduce it. I'll 
take a look into it later.

Original comment by dimok...@hotmail.de on 1 Dec 2010 at 7:29

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
I have been prompted to update from R207 to R208. Downlaod goes ok but when it 
reboots it hangs.

Also if i go to the homebrew channel and I try to open WiiExplorer R208 it 
freezes.
The is no dump code or anything helpful in the screen.

The omly thing I can do is to reinstall R207.dol.

Thank you very much for your efforts.

Original comment by Alberto....@gmail.com on 12 Dec 2010 at 10:42

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
Did you try to maunally download the file and put it on SD/USB?

It works fine for me.

Original comment by dimok...@hotmail.de on 12 Dec 2010 at 10:57

GoogleCodeExporter commented 9 years ago 
I downloaded r208 with auto-update and manually.  Neither worked.  I tried 
launching it from the HBC v1.0.8 (IOS58) and through the v9 channel.  Both 
times I got a black screen and my Wii drive flashes over and over.

I didn't have this problem with 206 though.

Original comment by Joostinonline on 12 Dec 2010 at 9:29

GoogleCodeExporter commented 9 years ago 
Ok i understand the problem here. It is a cIOS issue. What IOS202 version with 
what base do you have? Try installing v4, v5 or v5.1 if that's not the case.

If that doesn't help try uninstalling the IOS202 completely and that should 
help for sure. But that is of course no solution. I would have to change it 
back to old style if that happens or make IOS58 as default boot IOS for config 
reading. Right now configs are read in IOS202 (if it is installed).

Original comment by dimok...@hotmail.de on 13 Dec 2010 at 11:40

GoogleCodeExporter commented 9 years ago 
Solved: I have updated IOS222 V4 to V5.1 with Pimp my Wii but...

   now Pimp My Wii hangs when detecting again the IOS.

Thank you very Much, WiiExplorer is a great application!

Original comment by Alberto....@gmail.com on 13 Dec 2010 at 6:36

GoogleCodeExporter commented 9 years ago 
IOS222 has nothing to do with WiiXplorer. You probably updated IOS202 too in 
the process and that solved it.

Original comment by dimok...@hotmail.de on 13 Dec 2010 at 6:50

GoogleCodeExporter commented 9 years ago 
Ok, It was IOS 202, not IOS 222.
Thank you

Original comment by Alberto....@gmail.com on 14 Dec 2010 at 7:34

GoogleCodeExporter commented 9 years ago 
Which IOS settings should I use for the Hermes installer?

I do not wanna undo other IOS customs that enable gc backups/USB speedup.

Original comment by bennay...@gmail.com on 17 Dec 2010 at 3:29

GoogleCodeExporter commented 9 years ago 
On another note,my wii does not show IOS 38 as a choice of implementation.

Original comment by bennay...@gmail.com on 17 Dec 2010 at 6:16

GoogleCodeExporter commented 9 years ago 
I intentionally installed IOS 38 and used IOS 202 to run IOS 222 installation 
and put on IOS 38 (only choice) and Wiixplorer still will not work.

Original comment by bennay...@gmail.com on 17 Dec 2010 at 8:21

GoogleCodeExporter commented 9 years ago 
It doesnt matter what IOS you use for the installation of the IOS. It matters 
which version you are installing. Try installing Hermes IOS202 v5.1 (not using 
it in the installer) and deleting your config files of WiiXplorer from 
everywhere (SD/USB). Than start WiiXplorer.

Original comment by dimok...@hotmail.de on 17 Dec 2010 at 10:21

GoogleCodeExporter commented 9 years ago 
I tried both Installing IOS 202 on IOS 38 and deleting all config traces and it 
still did not work (including deleting cfg files in data and language files).

Original comment by bennay...@gmail.com on 18 Dec 2010 at 3:38

GoogleCodeExporter commented 9 years ago 
Sorry for double post but which IOS should I install;202,222,223,or 224?

Original comment by bennay...@gmail.com on 18 Dec 2010 at 3:40

GoogleCodeExporter commented 9 years ago 
Like I said in my post above it's IOS202. This is not an usb loader or anything.

You need to install the proper version of it. If you don't it will not work. It 
needs at least v4, v5 or v5.1 of Hermes IOS. Download of the installer is in 
the download section of this site.

Anyway you guys should stop posting here because this issue has nothing to do 
with the problems you guys have. This issue is about the "Reload" Button in the 
StartMenu.

Original comment by dimok...@hotmail.de on 18 Dec 2010 at 6:44

GoogleCodeExporter commented 9 years ago 
@svin83
I can't seem to get this problem. Can you try again on R209. If it still occurs 
i'll give you a dol where i can trace the dump.

Original comment by dimok...@hotmail.de on 21 Dec 2010 at 10:16

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
I crash when reloading (startmenu "Reload) on IOS202(5.1 hermes) but not on 
IOS58

The crash on 202 is about 1 second after "remounting devices" window pops up

Original comment by spe...@gmail.com on 26 Dec 2010 at 9:33

GoogleCodeExporter commented 9 years ago 
Same thing here, works with IOS58 but not with any other.

Original comment by bass...@hotmail.com on 10 Oct 2011 at 2:45

GoogleCodeExporter commented 9 years ago 
Issue 500 has been merged into this issue.

Original comment by strtoul on 11 Nov 2011 at 3:39

GoogleCodeExporter commented 9 years ago 
Seems to work fine in newer revisions. Report back if still preset.

Original comment by dimok...@googlemail.com on 10 Jun 2012 at 4:35