Closed GoogleCodeExporter closed 9 years ago
You didn't write, was it work before? Was you reset to defaults when you
upgrading,
was you check Status & Log -> Wireless tab, etc.
If "wl status" command will return reasonable output, problem is in settings.
There
were many problematic points with WiFi, check wl500g.info forum. Even it may be
broken power supply.
P.S. It works on my wl520gU & on many others 500gpV2
Original comment by lly.dev
on 3 Feb 2010 at 7:54
Yes, it works on original fw.
SSID: "szczepan"
Mode: Ad Hoc RSSI: 0 dBm noise: 0 dBm Channel: 1
BSSID: 00:00:00:00:00:00 Capability: IBSS ShortSlot
Supported Rates: [ 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 ]
Original comment by lesiuk@gmail.com
on 3 Feb 2010 at 8:02
Ok, I will try restore settings.
Original comment by lesiuk@gmail.com
on 3 Feb 2010 at 8:05
So, WiFi card itself is operational. Might be some problem with security due to
updated driver. Try to turn off security, or change encryption methods.
Unfortunately, Broadcom distribute WiFi driver in binary form only, without full
specs, so it is very hard to modify anything.
Original comment by lly.dev
on 3 Feb 2010 at 8:08
Thanks :)
After restoring settings it works.
Original comment by lesiuk@gmail.com
on 5 Feb 2010 at 6:35
NB! Always perform reset to defaults when migration from original ASUS FW.
Original comment by lly.dev
on 5 Feb 2010 at 8:15
Original issue reported on code.google.com by
lesiuk@gmail.com
on 3 Feb 2010 at 7:42