Open GoogleCodeExporter opened 9 years ago
Original comment by lly.dev
on 9 Apr 2010 at 11:39
I've briefly looked into this. I think dd-wrt uses iwspy to measure the link
quality per client, they can be found here:
http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html
I've tried them out without success. It seems that the utilty requires
/proc/net/wireless to be available, therefore I turned the wireless extension
on in the kernel configuration. This resulted in a 4KB larger firmware image. I
flashed my rt-n16 but it seems the image became unbootable.
The power comes on, switch will be initialized but after that the system stops
responding. After the switch wifi should be initialized, so I guess we have a
compatibility problem. Perhaps dd-wrt uses different wireless drivers.
The program iwspy, unstripped, staticly linked is about 14KB lzma compressed
any thoughts?
Original comment by WP.s...@gmail.com
on 3 Aug 2012 at 2:19
Original issue reported on code.google.com by
peter.pa...@gmail.com
on 9 Apr 2010 at 11:28