Closed tropeadonato closed 1 year ago
hi, i just looked in the chinese documentation again, and no, there's no way to query generated data for specific parallel machine, sorry. if it would be possible i'd implement it.
Hello,
thanks for the answer, I'm trying to connect both inverters with usb cables, which are correctly recognized, but among the program arguments there are those to specify the dev & vendor ids but being the same I can't specify the inverter to connect to . is there a way to point to the /dev/hidrawX ?
[342523.625981] usb 3-2: USB disconnect, device number 3 [342573.279379] usb 3-2: new low-speed USB device number 4 using xhci_hcd [342573.470489] usb 3-2: New USB device found, idVendor=0665, idProduct=5161, bcdDevice= 0.02 [342573.470494] usb 3-2: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [342573.481731] hid-generic 0003:0665:5161.0006: hiddev0,hidraw3: USB HID v1.11 Device [HID 0665:5161] on usb-0000:03:00.0-2/input0 [342596.150235] usb 3-1: USB disconnect, device number 2 [342602.479648] usb 3-1: new low-speed USB device number 5 using xhci_hcd [342602.670660] usb 3-1: New USB device found, idVendor=0665, idProduct=5161, bcdDevice= 0.02 [342602.670666] usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=0 [342602.681546] hid-generic 0003:0665:5161.0007: hiddev2,hidraw4: USB HID v1.11 Device [HID 0665:5161] on usb-0000:03:00.0-1/input0
Bus 003 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial Bus 003 Device 005: ID 0665:5161 Cypress Semiconductor USB to Serial
thank you very much
Da "Evgeny Zinoviev" @. A "gch1p/inverter-tools" @. Cc "tropeadonato" @.,"Author" @. Data Sat, 31 Dec 2022 10:26:14 -0800 Oggetto Re: [gch1p/inverter-tools] problem with total generated power on a two inverter system (Issue #6)
hi, i just looked in the chinese documentation again, and no, there's no way to query generated data for specific parallel machine, sorry. if it would've be possible i'd implement it.
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread. Message ID: @.***>
@tropeadonato done in 5d9e8289037675ee9f33ee62a3b9e2c25e33837a
in a system of two inverters in parallel, the get-total-generated command returns the value of the inverter to which the usb cable is connected, it is possible to read the energy data generated by both inverters perhaps using a command similar to the get-p -status?