Closed wereHamster closed 5 years ago
What size desk do you have?
I would suggest the following
1 - Unplug the megadesk controller. 2 - Power on the desk. 3 - Plug in megadesk 4 - See if it works
I've noticed sometimes after a power failure in the house, unplugging and replugging just the controller repairs it.
Closing due to no activity.
Hi @gcormier, I have one of your preassembly part. Notting move too. I have the large one but i dont heart any sound after toggle up button 16x. I tried also factory reset with down button at startup, and try test mode with up button at startup. I tried what you tell in this issues. I heard 4 bip at startup like describe in install process. Thanks for your help Max
When you toggle up 16x, you should hear a series of tones afterwards confirming the mode has changed. Did you hear that?
On Sat, May 9, 2020 at 10:27 AM maximemcduff notifications@github.com wrote:
Hi @gcormier https://github.com/gcormier, I have one of your preassembly part. Notting move too. I have the large one but i dont heart any sound after toggle up button 16x. I tried also factory reset with down button at startup, and try test mode with up button at startup. I tried what you tell in this issues. I heard 4 bip at startup like describe in install process. Thanks for your help Max
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/gcormier/megadesk/issues/18#issuecomment-626184362, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACAAC57OYTYTWERSW2Y5FSDRQVR6VANCNFSM4HQEJJCQ .
I hear the four beeps during startup, and both testing modes also work as expected. But when I press the buttons the desk doesn't move. I don't have an oscilloscope unfortunately, so I can't tell you what's happening on the LIN bus.
Do you have any idea what could cause this and how we could further investigate?