Closed slipx06 closed 1 year ago
On your "blank" lines. 2 of them have hidden tabs that break configuration.yaml This is in the templates file.
I've removed them. Thanks
Busy looking at it. Card is not displaying right values. Will try get more info
Not sure if it makes any difference but I used region 2 flows
It shouldn't. Region 2 is a copy of region 1. Only difference is the url and extra options needed on the orrigional login. Is region 2 working fine for you ?
I will look further into it tomorrow, but the problem is on grud values.
Sent from Outlook for Androidhttps://aka.ms/AAb9ysg
From: slipx06 @.> Sent: Saturday, May 20, 2023 9:57:39 PM To: gdwaterworth/Home-Assistant---E-Linter-Logger---Sunsynk @.> Cc: gdwaterworth @.>; Comment @.> Subject: Re: [gdwaterworth/Home-Assistant---E-Linter-Logger---Sunsynk] Add templates and sample for the latest power flow card (PR #18)
Not sure if it makes any difference but I used region 2 flows
— Reply to this email directly, view it on GitHubhttps://github.com/gdwaterworth/Home-Assistant---E-Linter-Logger---Sunsynk/pull/18#issuecomment-1555982896, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AUYVNIZLQC7C6HTJEMMLPE3XHEO3HANCNFSM6AAAAAAYIJ6CZI. You are receiving this because you commented.Message ID: @.***>
Region 2 seems to be working fine
I don't think the Aux attribute is correct, It seems to be PV input. I read it from [sensor.sunsynk_output] poweraux
The current template file and sample is based on a very old version of the card. I've included template sensors to easily map to the latest version of the sunsynk power flow card as well as a new sample configuration.