The wrong talk group is sometimes keyed up when you transmit

[K5SJW]

When Keying the radio at times the wrong talk group is transmitted Example.. Radio set to 3100 key the radio and it works fine on the second time it might key up 310 or private call the last caller.. using a winters duplex board or single zumspot

[tg9aso]

This is probably associated to the "Group Call" and "Personal Call" hold time setting, the radio will replay with the last TG heard for the time selected in this setting. It defaults to 5sec and you can go as little as 1sec, unfortunatelly as far as I recall you cant diasble this feature.

[escalated]

This bug seems to be happening to me, and is unrelated to the hold time setting.

From a fresh boot up I can key up a channel i have with the assigned talkgroup "X" and it will key up talkgroup "Y". Talkgroup "Y" just happens to be the top talkgroup in my talkgroup list, and is not assigned to any other channels.

It's also inconsistent through one session, without rebooting sometimes it will try the talkgroup I have assigned, if I pause and wait, try again, it will try to contact talkgroup "y" again, and switch back to the one I have assigned on the next try.

It should be noted that I'm not able to reach the repeater I'm testing this with.

[jfcampbelljr]

I Had (have) this problem too and could readily reproduce it. Here is what I think it is and how I think it may be fixed (needs more testing). I had private contacts that were also in the Talk Groups listing (for private calls). This seems to be where the problem started. First I deleted those private ID's from the Digital Contact List and re-uploaded the codeplug...that didn't fix the issue. Next I tried exporting (Export Data Conversion File) in tools, opening that in DMR Contact Manager, updating the DMR Contacts, checked that the contacts I had as Private Group Calls were not included, saved that file, re-opened it in the D868UVE software and uploaded the codeplug and contacts.

As of now it seems that I am not having the issue anymore.

[dtw2000]

I also stumbled across this issue. Like @jfcampbelljr, I noticed after I added a private call to my contacts. I did this manually and the private call id was also a digital contact, as I had imported all DMR contacts in the day before. I can't confirm his process of fixing the state. My radio fell into a bricked state that same day. The bricked state is probably unrelated to this issue, but it is stuck at the 'Anytone' bootscreen when I turn it on, if you read this and have suggestions, please message me.

[wr3y]

Same problem here. I have tried different codeplugs and the same problem always. About to get rid of this Anytone. Doubt I could even sell the thing. No issues with my old MD380!