search

geaz / simplyRetro-Z5

A 3D printed, five inch retro gaming handheld.
Other
129 stars 13 forks source link

First Test Boot #18

Closed ccraig1984 closed 2 years ago

ccraig1984 commented 2 years ago

Trying to make sure everything will boot and nothing. I have it setup with the AC power, OTG cable to the screen and the supplied hdmi cable with a brand new PNY 32gb sd card. I have used Etcher portable and Etcher installed. I have used win32diskimager and still to no avail. Am I doing something wrong? I can get noobs to work on the preloaded sd card and on a new 32gb sd card. I am using sdcard.img version 1.4. Edit: I can get the splash screen if I turn it on in the config but otherwise I just get a black screen. It doesn't say no input but a black screen as in that is all that it is receiving.

geaz commented 2 years ago

As far as I remember it should be ok to flash with Etcher and use the Image on a Raspberry Pi Zero. Please be aware that it is not working with any other Pi (will also not work on a Pi Zero 2).

ccraig1984 commented 2 years ago

Well then that is my problem, I am using a pi zero 2. Oh well, I can still configure it to use the battery monitor as well as the power on and off button. Thank you and problem resolved.