search

geeekpi / upsv3

It is demo code for 52Pi UPS (With RTC & Coulometer) For Raspberry Pi SKU: EP-0118
30 stars 3 forks source link

Firmware update UPS has stopped working #14

Closed ociekly closed 7 months ago

ociekly commented 2 years ago

Hello. I had to update the firmware because my motherboard suffered from turning off after about 24 hours. For this purpose, I purchased the NU-Link programmer. I made the updates today according to the PDF instructions. Everything ended correctly

The system does not seem to be working. There is no reaction after installing the batteries. I press the switch, the charge indicator shows for a moment that the batteries are fully charged, but the power to the Raspberry is not turned on (the RPI POWER LED is off). Repeated presses also activate the indicator. Holding the key down also activates the indicator momentarily. After connecting the charger, the status indicator "fills up" and only the last LED flashes (batteries full). I tried to program the system for a few hours, but without success. Is the firmware file correct?

image

David

ociekly commented 2 years ago

what should be the bit configuration? I seem to be using a newer version of the program. chipsettings

yoyojacky commented 7 months ago

There is something wrong with your firmware. we do not recommend you update the firmware by yourself.

SplavSlav commented 1 month ago

I have exactly the same problem as ociekly. How to fix it?

yoyojacky commented 1 month ago

我遇到了与 ociekly 完全相同的问题。如何解决？

联系销售，提供你的order number，申请售后。