1-Storage:
M.2 MVNE drive GEN3 Up to 2280 tested up to 870Mb/s read
2-Audio:
24-bit DAC / CAD for 96kHz high-definition audio
1 Headphone jack output
1 Built-in speaker
2 Built-in differential microphone
2 Mono microphones jack
1 Stereo Aux input
EEPROM for plug and play
3-Power:
Standard USB C PD charger profile up to 100w
In a nutshell this is a 3 in 1 Hat for RPI5:
1-Storage: M.2 MVNE drive GEN3 Up to 2280 tested up to 870Mb/s read
2-Audio: 24-bit DAC / CAD for 96kHz high-definition audio 1 Headphone jack output 1 Built-in speaker 2 Built-in differential microphone 2 Mono microphones jack 1 Stereo Aux input EEPROM for plug and play
3-Power: Standard USB C PD charger profile up to 100w
Here is the link : https://raspiaudio.com/product/pi5dpa/ Here is the installation guide : https://forum.raspiaudio.com/t/pi-audio-drive-shield-by-raspiaudio-installation-guide/884
thanks!