Run benchmark on any attached storage device (e.g. eMMC, microSD, NVMe, SATA) and add results under an additional heading. Download the script with curl -o disk-benchmark.sh [URL_HERE] and run sudo DEVICE_UNDER_TEST=/dev/sda DEVICE_MOUNT_PATH=/mnt/sda1 ./disk-benchmark.sh (assuming the device is sda).
iperf3 --bidir -c $SERVER_IP: TODO Mbps up, TODO Mbps down
(Be sure to test all interfaces, noting any that are non-functional.)
GPU
TODO: Haven't determined standardized benchmark yet. See Issue #2.
Memory
tinymembench results:
Click to expand memory benchmark result
```
# Run the two commands below, then replace this code block with the full result.
git clone https://github.com/rojaster/tinymembench.git && cd tinymembench && make
./tinymembench
```
sbc-bench results
Run sbc-bench and paste a link to the results here:
Basic information
Linux/system information
Benchmark results
CPU
Power
stress-ng --matrix 0
): TODO Wtop500
HPL benchmark: TODO WDisk
MANUFACTURER_AND_MODEL_OF_DISK_HERE
curl https://raw.githubusercontent.com/geerlingguy/pi-cluster/master/benchmarks/disk-benchmark.sh | sudo bash
Run benchmark on any attached storage device (e.g. eMMC, microSD, NVMe, SATA) and add results under an additional heading. Download the script with
curl -o disk-benchmark.sh [URL_HERE]
and runsudo DEVICE_UNDER_TEST=/dev/sda DEVICE_MOUNT_PATH=/mnt/sda1 ./disk-benchmark.sh
(assuming the device issda
).Also consider running PiBenchmarks.com script.
Network
iperf3
results:iperf3 -c $SERVER_IP
: 94.6 Mbpsiperf3 --reverse -c $SERVER_IP
: TODO Mbpsiperf3 --bidir -c $SERVER_IP
: TODO Mbps up, TODO Mbps down(Be sure to test all interfaces, noting any that are non-functional.)
GPU
Memory
tinymembench
results:Click to expand memory benchmark result
``` # Run the two commands below, then replace this code block with the full result. git clone https://github.com/rojaster/tinymembench.git && cd tinymembench && make ./tinymembench ```sbc-bench
resultsRun sbc-bench and paste a link to the results here:
Phoronix Test Suite
Results from pi-general-benchmark.sh: