I am currently running HG (version v1.0-beta.493) on FreeBSD using X10 modules and have some Insteon units that I am trying to install.
I connected the 2413U to an available USB port. The unit is recognized on the USB configuration. and created the /dev/cuau0 (a serial device) and /dev/ttyu0. HG does not detect either of these and display them in the drop-down selection box. Is this a similar problem to the CM15A / USB stack link difference with FreeBSD?
Hi,
I am currently running HG (version v1.0-beta.493) on FreeBSD using X10 modules and have some Insteon units that I am trying to install.
I connected the 2413U to an available USB port. The unit is recognized on the USB configuration. and created the /dev/cuau0 (a serial device) and /dev/ttyu0. HG does not detect either of these and display them in the drop-down selection box. Is this a similar problem to the CM15A / USB stack link difference with FreeBSD?
usbconfig output: ugen3.10: at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (90mA)
diff of /dev with Insteon attached: 15,17d14 < crw-rw---- 1 uucp dialer 0xac Feb 25 19:43 cuaU0 < crw-rw---- 1 uucp dialer 0xad Feb 25 19:43 cuaU0.init < crw-rw---- 1 uucp dialer 0xb5 Feb 25 19:43 cuaU0.lock 84,86d80 < crw------- 1 root wheel 0x99 Feb 25 19:43 ttyU0 < crw------- 1 root wheel 0x9a Feb 25 19:43 ttyU0.init < crw------- 1 root wheel 0xa4 Feb 25 19:43 ttyU0.lock 115d108 < lrwxr-xr-x 1 root wheel 10 Feb 25 19:43 ugen3.10@ -> usb/3.10.0