Closed alzzy closed 5 years ago
Is there any other X10 software installed on your computer.
No.
On Tue, Dec 18, 2018 at 1:39 PM mralapete notifications@github.com wrote:
Is there any other X10 software installed on your computer.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/genielabs/HomeGenie/issues/349#issuecomment-448325031, or mute the thread https://github.com/notifications/unsubscribe-auth/AZCSXkhkS4gfTyxzZu4KlSHa0avK7ThMks5u6TZ9gaJpZM4ZY06I .
x10 commander uses X10 drivers so these would conflict with HG have you tried another USB port?
x10 commander was not on pc initially. I only installed it after HG would not control cm19. To verify pc would communicate with cm19 and that cm19 was ok. Besides cm19 is a usb device and any app should be able to get to it. Removed x10 commander and still had issue.
On Tue, Dec 18, 2018 at 1:42 PM Tuicemen notifications@github.com wrote:
x10 commander uses X10 drivers so these would conflict with HG have you tried another USB port?
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/genielabs/HomeGenie/issues/349#issuecomment-448325911, or mute the thread https://github.com/notifications/unsubscribe-auth/AZCSXgS2FtTvYBpbTUG1YmCZuwiXpCMmks5u6TcsgaJpZM4ZY06I .
Yes tried all 3 usb ports.
Tried to install HG on a second Win10 machine. Get popup window says "7-zip error unsupported method" Installed but when I go to config screen there is nothing there .
May be try a different free zip tool from the Windows store
Gene has put out a couple releases since your post. I'm not sure which version you tried but you may wish to try stable22 as many of the prior releases are now labled prereleases and some aren't even available now.
where do I find it? The HG download page is throwing a 404 error.
If you wish to use the same version as the PiX10Hub then this https://github.com/genielabs/HomeGenie/releases/tag/v1.1-stable.527
Which file do I want for windows install?
When in doubt check the documentation https://genielabs.github.io/HomeGenie/index.html#/get_started for the latest versions.
However the EXE extension one should get you the Windows version
Already tried that. That webpage is not at all helpful for this install as it directs one to a windows install page that goes to a 404 error page. I tried the .exe file from the github Unzipped with win zip. But there is no msi installer. Once unzipped what file does the actual install?
@alzzy can you please try latest build? https://github.com/genielabs/HomeGenie/releases/tag/v1.2-stable.26 Is there someone that can also test this with a CM15 on Windows?
I assume you installed the driver first and rebooted your PC before you connected the CM19
@genemars I can test this but not till the week end.
Can someone direct me to details on how to install this in windows?
Thanks
I would assume download this- https://github.com/genielabs/HomeGenie/releases/download/v1.2-stable.26/HomeGenie_v1.2-stable.26.exe then click on the exe file
OK Thanks I will try later today. Is there any special procedure for installing drivers or are they installed automatically with the application?
Windows installer should take care of everything. Remember no other X10 drivers should be installed as they will cause a conflict. After install check your Windows device driver. You should see it loaded there.Install first then connect the CM15
It WORKS! v1.2-stable26 installed on win 10 and controls cm19a. Will do more testing later. Thanks for the help!
@alzzy that's Great! Maybe you can close this issue. and if after testing you find a problem then a new issue can be opened. It helps keep things tidy and nothing gets missed.
I installed latest release on win 10 Laptop and it would not control a cm19a. Enabled cm19 interface but it does not respond. PC recognizes cm19 and driver is working. After I had this issue I installed x10 Commander and it controls devices with cm19a just fine. Did a reinstall of HG and got same results.