gfto
commented
4 years ago Send the report to dvblast mailing list. Possible problems that you are seeing:
- debug: Frontend "TurboSight TBS 6704(Quad ATSC/QAMB)" supports - This DVB card does not have drivers in upstream Linux, this means that the drivers are dodgy
- The fact that you are not getting anything quite possbily menas that the tunning parameters are not correct and you should check them.
dvblast -f 485028615 -a 0 --delsys ATSC -v 6 -c adapter0.conf DVBlast 3.4 (release) warning: restarting debug: compiled with DVB API version 5.11 debug: using DVB API version 5.11 debug: Frontend "TurboSight TBS 6704(Quad ATSC/QAMB)" supports: debug: frequency min: 44000000, max: 1002000000, stepsize: 62500, tolerance: 0 debug: symbolrate min: 0, max: 0, tolerance: 0 debug: capabilities: debug: INVERSION_AUTO debug: FEC_AUTO debug: QAM_64 debug: QAM_256 debug: QAM_AUTO debug: 8VSB debug: delivery systems: debug: ATSC debug: DVBC_ANNEX_B debug: tuning ATSC frontend to f=485028615 inversion=-1 modulation=qam_auto warning: failed opening CAM device /dev/dvb/adapter0/ca0 (No such file or directory) debug: setting filter on PID 0 debug: setting filter on PID 16 debug: setting filter on PID 17 debug: setting filter on PID 18 debug: setting filter on PID 19 debug: setting filter on PID 20 debug: conf: 127.0.0.1:1001 config=0x1 sid=1 pids[0] debug: change sid tsid
..... < no output until i press CTRL-C> ^Cinfo: Shutdown was requested. debug: removing 127.0.0.1:1001