search

gfto / mptsd

mptsd receives mpegts streams from udp/multicast or http and combines them into one multiple program stream that is suitable for outputing to DVB-C modulator. It is tested with Dektec DTE-3114 Quad QAM Modulator and it is used in production in couple of small DVB-C networks.
http://georgi.unixsol.org/programs/mptsd/
GNU General Public License v2.0
53 stars 41 forks source link

Feature Request #31

Open SonnyWalkman opened 2 years ago

SonnyWalkman commented 2 years ago

Could the option be added to mux private PES stream such as Teletext? Yes I know, Its a dead format however, I'd like to use teletext as a way of showing DVDB-T Transmitter status. What would be involved in the code? Time $$?

lars18th commented 6 months ago

Hi @SonnyWalkman ,

This tool is to MULTIPLEX several services inside a MPTS. What you request is to mux several streams inside a service. To do that you could use a tool like FFmpeg.

SonnyWalkman commented 6 months ago

Thanks for adding RTP..

I'll glad to see some work done on mptsd and are to give it another shot over TSduck.

Question? I have a alternate Teletext stream coming in via udp which has it own PTS and PCR. Is mptsd able to multiplex as a source? I assume yes since the PCR is restamped. I'm looking to wrap mptsd in go code called from cmd = exec.Command(args[0], args[1:]...)

Is there an example of the command line?

lars18th commented 6 months ago

Hi @SonnyWalkman ,

I repeat: This tool is only an SPTS multiplexer into a MPTS. Therefore, any action inside the SPTS can't be done with this tool.

If you need to "replace" the Teletext pid of a service, then I recomend these options:

  1. Use the FFmpeg tool to "remux" both. You can input the Service and the Teletext streams, and copy the internal streams (without reencoding). Then you can use the output (in mpeg-ts) as the input of mptsd.
  2. Use the TSDuck tool to "join" the Service and the Teletext pids, and then "retime" the timestamps of the Teletext pid based on the time of the service. However, I feel this will not be a perfect option. So I recommend then the first one.

I hope this helps.

SonnyWalkman commented 5 months ago

Hi @lars18th , Yes correct, I understand all inputs into mptsd must be SPTS udp/rtp feeds. Effectively this is what I'm doing.

I'm using outputs from two instances of OBS Studio record output over udp and a combo feed from a separate ffmpeg script which combines pip (side-by-side) of the other two obs studio feeds.. Adding teletext is a service however, I have contemplated on the process of combining it with the combo feed and using the same ffmpeg script for the combo generation?

The teletext is the output from vbit2.exe --format ts => script to push stdout to udp..

ffmpeg unfortunately doesn't like it using:-

ffmpeg -i udp://224.0.0.1:9999 -i udp://224.0.0.6:6666 -map 0:v -map 0:a -map 1:s -c:v copy -c:a copy -c:s copy -f mpegts udp://224.0.0.9:5000

However, I'm going to try vbit2's stdout directly into ffmpeg as "-i" "-" to eliminate another multicast stream and see how it works?

By the way, I've attached a simple mptsd usage by picking apart the usage function in config.c to assist others wanting to give mptsd a try.

MPTSD Usage.pdf

SonnyWalkman commented 5 months ago

What's next with mptsd.. Could the EIT scheduling get some love?

lars18th commented 5 months ago

Hi @SonnyWalkman ,

Thank you for the contribution of the PDF usage document. I suggest that you open the Wiki page of the project and upload to it this file.

Regarding your use case, perhaps it has sense to work on it to share the experience. As I understand that's your environment:

OBS (audio/video generator) ---> FFmpeg ---> mptsd ---> DVB?
                                   ^
Disk (txt pages) ---> vbit2 -------+

In this scenario my comments:

I hope this helps you.

lars18th commented 5 months ago

Hi @SonnyWalkman ,

And if the option of using the setts filter plugin doesn't work with FFmpeg, then you can also try the svresync of TSDuck. But in this case the usage will change: You need to compose your TV service with OBS+FFmpeg, and the TXT service with vbit2, then mux them with mptsd (as two independent services), and after use the TSDuck tool with the svresync filter (plus others) to "transplant" the TXT service inside the TV service. Perhaps quite tricky, so I suggest to first go with the setts filter in FFmpeg because in fact you're using FFmpeg to generate your service. It will be more robust.

Regards.

lars18th commented 5 months ago

Hi @SonnyWalkman ,

FYI, this works in my case using FFmpeg with three inputs (one A/V service and two Radios, all captured from different broadcasts in different frequencies):

ffmpeg \
-thread_queue_size 128 -i <input_1> \
-thread_queue_size 128 -i <input_2> \
-thread_queue_size 128 -i <input_3> \
-map 0 -map -0:s? -map -0:d? -ignore_unknown \
-map 1 -map -1:s? -map -1:d? -ignore_unknown \
-map 2 -map -2:s? -map -2:d? -ignore_unknown \
-c copy -f mpegts udp://224.0.0.9:5000?pkt_size=1316

All is played without troubles from the multicast output. And I can change the audio channel and all tracks (from the original service and from the radios) plays fine.

The reason for the -map 0 -map -0:s? -map -0:d? -ignore_unknown lines is to remove all TELETEXT and DATA streams. This is necessary because the FFmpeg tool don't want streams without timestamps (private datas, EIT, etc.). And with the Teletext timestamps it has troubles (the "Non-monotonous DTS in output stream" message not currently fixed). So if you need to merge the TELETEXT stream, you'll need to search more for a reliable solution.

Regards.

SonnyWalkman commented 5 months ago

Hi @lars18th, Thankyou for your assistance with my fascination with Teletext. I've been trying your suggestions and have svresync time stamping the PCR for my teletext stream.

I have tried

ffmpeg \ -thread_queue_size 128 -i <input_1> \ -thread_queue_size 128 -i <input_2> \ -thread_queue_size 128 -i <input_3> \ -map 0 -map -0:s? -map -0:d? -ignore_unknown \ -map 1 -map -1:s? -map -1:d? -ignore_unknown \ -map 2 -map -2:s? -map -2:d? -ignore_unknown \ -c copy -f mpegts udp://224.0.0.9:5000?pkt_size=1316

It works a treat however combine all into one service, I'm looking to have 3 services (HD video and audio) with teletext available to all 3 services. (eventually)

I've successfully have HD video, AAC audio and teletext combined in one service. Service-HD1 Another HD video and AAC audio service Service-HD2 combined using -P mergehowever, when analysing the data using -P analyse -i 10 -o output.txt I see both services however my first service Service-HD1 reports as unknown. Unable to show service name, type etc? Something I'm doing for sure.

I've suspected the video and audio PCR pid's to be conflicting and changed these to make no difference?

I'll build the latest mptsd and have a crack on using it in combination with ffmpeg and tsp. setup two instances of obs studio udp multicast streams with the third stream a ffmpeg stream and see how it goes this weekend.

I've been developing on windows with bat scripts however, mptsd is Linux only and it's time to jump ship over to my Ubuntu and trying it out. I'll combine the teletext transport stream to each service using tsp SPTS and output each -O ip 224.0.0.X:9999 to mptsd for a steady MPTS

How would I go about the config's to do such with mptsd?

Regarding High precision clock. I'm considering using Pop OS! (by System76) for my final system since it built with Nvidia drivers and supports obs studio out of the box. Basically, gamers and streamer OS. its a flavour of Ubuntu without the bloat.

SonnyWalkman commented 5 months ago

Hi @lars18th

Thank you for the contribution of the PDF usage document. I suggest that you open the Wiki page of the project and upload to it this file.

Wiki created with a simple overview of mptsd for newbies like myself. Happy to contribute.