Open gusarg81 opened 5 years ago
I've already downgrade fw to 3.3.6_2017071114, but rtsp doesn't work either. I can see the http page, but the rtsp link has no respose. Don't know what to do. It seems that noone is maintaining this project any more.
Yeah, seems dead. A Shame...
same problem here
Usage: Multiple streams:
Max single h264 stream:
Max single mpeg4 stream:
Max single mjpeg stream:
Error! Abnormal AP exit under chipid(0),cpuid(1),graph(1),query_id=0x10001 ioctl "VPD_APPLY" fail! (ret=-1) [err] gm_apply groupfd(0x1): Apply fail! ioctl "VPD_POLL" driver into stop state.
anyone managed to solve?
I was experiencing the very same problems, but finally got it resolved.
What helped me was to re-do the whole process from scratch:
@vkizhaev-spartez can you send me that firmware please? I can' t find it.
Thanks.
@vkizhaev-spartez can you send me that firmware please? I can' t find it.
Thanks.
hi, recovery image is possible to get here https://c720p-recovery.pekidi.com Use tf_recovery.img file and report
tf_recovery (1).img.zip This is the one I used. Though I must say, that the whole thing didn't worth it in my case, because I ended up having an RTSP stream with a lag of about 10 seconds and the picture in MiHome had become a mess, full of broken squares upon each movement and such stuff. I'm using the camera as a baby cam and as you can imagine, my wife didn't like the change :)
Moreover, my camera can't rotate now from the MiHome app, only manually, but I don't know if it has anything to do with the hack (removing the card doesn't help).
Yeah, I've read about the poor RTSP. So, basically is a useless camera (I was not using it anyways). Every camera with no RTSP and ONVIF is kind useless...
Also, I can't even make it work normally, does not reads the QR code in Xiaomi Home app when trying to add the device.
Hi,
Today test the last from git and what does not work:
Any Ideas?
Thanks in advance.