search

gilphilbert / jukestudio

A web-based tool to create title labels for jukeboxes
https://juke.studio
2 stars 1 forks source link

Spacing #1

Closed BeckyLanger closed 3 years ago

BeckyLanger commented 3 years ago

Good Morning! I love your juke.studio! This is perfect for me as I have a TON of records for my jukebox, but I do not have most of the labels. However, when I print the labels from your program, there is NO spacing between the labels which makes it difficult to cut them and still have a bottom border. Is there anyway you can add a small space between each label? red labels 1.pdf

gilphilbert commented 3 years ago

Glad it's useful for you!

The labels are designed to print with no spaces - this is largely because the pre-printed perforated labels use this exact format. I use a steel ruler and a sharp knife to cut up the labels (I print on medium weight card).

If that doesn't work for you, I can add an option to separate the labels slightly so you can cut them out individually

BeckyLanger commented 3 years ago

I'd really appreciate it if you could add the spacing, I gave it a shot cutting them with a razor, but I'm not the best at it. I tried using a paper cutter and the blade is a little too thick for the labels.

gilphilbert commented 3 years ago

Well, good news and bad news... the good news is that the fix is now on the site! Head to the "Design" tab at the top and in the window, select "Wider spacing".

The bad news is that my hoster messed up and now the site is down. I switched providers, it'll take a little while before it's back again.

The following link should work in the meantime: https://gilphilbert.github.io/jukestudio/

Test it out and let me know if it works for you.

BeckyLanger commented 3 years ago

Thank you so much for doing all that work, I really appreciate it!

On Thu, Mar 11, 2021, 2:19 PM gilphilbert @.***> wrote:

Well, good news and bad news... the good news is that the fix is now on the site! Head to the "Design" tab at the top and in the window, select "Wider spacing".

The bad news is that my hoster messed up and now the site is down. I switched providers, it'll take a little while before it's back again.

The following link should work in the meantime: https://gilphilbert.github.io/jukestudio/ http://url

Test it out and let me know if it works for you.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/gilphilbert/jukestudio/issues/1#issuecomment-796980127, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATFQBX7TR2Z7SGVQWYIJUMLTDECU3ANCNFSM4Y6LS6CQ .

gilphilbert commented 3 years ago

No problem! The site's backup and the link above will forward to it now. I'll close this issue - if you're having problems still you can reopen it again

BeckyLanger commented 3 years ago

Okay thank you

On Thu, Mar 11, 2021, 3:42 PM gilphilbert @.***> wrote:

No problem! The site's backup and the link above will forward to it now. I'll close this issue - if you're having problems still you can reopen it again

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/gilphilbert/jukestudio/issues/1#issuecomment-797035398, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATFQBXZ4BTDV4BR7JKOOEFTTDEMK3ANCNFSM4Y6LS6CQ .

TMURRAY517 commented 2 weeks ago

Hello, the Wider Spacing option doesn't seem to work when I go to print. It doesn't stay checked in the design tab. Could you please check when you have time as it would really help with cutting out the labels.

Thank you!