Open Pilgrim182551 opened 5 days ago
Thanks, unfortunately but not complete gerbers files Both panels have zero layers detected, only drilling no contour/dimensions, no silkscreen (jlcpcb gerber viewer) ...
I used dxf files to order panels which are made of paint coated aluminium
Ok, got it, thank you! I will have to mill both panels myself, wanted to save some time...
Regards, Josef Pokorný aka Pilgrim 182551
From: Greg Kasprowicz @.> Sent: 21 October 2024 13:10 To: gkasprow/Pico-fmeter @.> Cc: Pilgrim182551 @.>; Author @.> Subject: Re: [gkasprow/Pico-fmeter] Missing Gerber files for front and back panel (Issue #7)
I used dxf files to order panels which are made of paint coated aluminium
Pozdrawiam / Best regards G.Kasprowicz
From: Pilgrim182551 @.> Sent: Monday, October 21, 2024 12:55:11 PM To: gkasprow/Pico-fmeter @.> Cc: Greg Kasprowicz @.>; Comment @.> Subject: Re: [gkasprow/Pico-fmeter] Missing Gerber files for front and back panel (Issue #7)
Thanks, unfortunately but not complete gerbers files Both panels have zero layers detected, only drilling no contour/dimensions, no silkscreen (jlcpcb gerber viewer) ...
— Reply to this email directly, view it on GitHubhttps://github.com/gkasprow/Pico-fmeter/issues/7#issuecomment-2426326601, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ABA75PWVWBCSZAYR7DVG4B3Z4TMQ7AVCNFSM6AAAAABQIWNEC6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIMRWGMZDMNRQGE. You are receiving this because you commented.Message ID: @.***>
— Reply to this email directly, view it on GitHubhttps://github.com/gkasprow/Pico-fmeter/issues/7#issuecomment-2426364415, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AR3QQF6XXLKIVLONYSJABY3Z4TOJTAVCNFSM6AAAAABQIWNEC6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIMRWGM3DINBRGU. You are receiving this because you authored the thread.Message ID: @.***>
GTO is silkscreen, GM1 is contour/cutouts
Better, but without Top/Bottom layers (Cu ratsnest area on both sides), without these layers is not possible to change colour (to black), only yellow raw FR4 core keeps.
From: Greg Kasprowicz @.> Sent: 21 October 2024 14:04 To: gkasprow/Pico-fmeter @.> Cc: Pilgrim182551 @.>; Author @.> Subject: Re: [gkasprow/Pico-fmeter] Missing Gerber files for front and back panel (Issue #7)
GTO is silkscreen, GM1 is contour/cutouts
— Reply to this email directly, view it on GitHubhttps://github.com/gkasprow/Pico-fmeter/issues/7#issuecomment-2426479198, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AR3QQFZHYNO2RBUE5L53LOLZ4TUTFAVCNFSM6AAAAABQIWNEC6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIMRWGQ3TSMJZHA. You are receiving this because you authored the thread.Message ID: @.***>
... i.e. missing mask layers
From: Vincenc Pilgrim @.> Sent: 21 October 2024 15:09 To: gkasprow/Pico-fmeter @.> Subject: Re: [gkasprow/Pico-fmeter] Missing Gerber files for front and back panel (Issue #7)
Better, but without Top/Bottom layers (Cu ratsnest area on both sides), without these layers is not possible to change colour (to black), only yellow raw FR4 core keeps.
From: Greg Kasprowicz @.> Sent: 21 October 2024 14:04 To: gkasprow/Pico-fmeter @.> Cc: Pilgrim182551 @.>; Author @.> Subject: Re: [gkasprow/Pico-fmeter] Missing Gerber files for front and back panel (Issue #7)
GTO is silkscreen, GM1 is contour/cutouts
— Reply to this email directly, view it on GitHubhttps://github.com/gkasprow/Pico-fmeter/issues/7#issuecomment-2426479198, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AR3QQFZHYNO2RBUE5L53LOLZ4TUTFAVCNFSM6AAAAABQIWNEC6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIMRWGQ3TSMJZHA. You are receiving this because you authored the thread.Message ID: @.***>
Ok thanks, but still not perfect... Sorry to bother you, but residual LCD connector on front panel at top and bottom sides needs to be deleted. On both sides make polygons following contour, name them for instance GND and spread the Cu (ratsnest) and export to Gerber. Or share panels project files and I will try to make gerbers. I am not fuly familiar with Altium but it is worth attempting...
From: Greg Kasprowicz @.> Sent: 22 October 2024 09:48 To: gkasprow/Pico-fmeter @.> Cc: Pilgrim182551 @.>; Author @.> Subject: Re: [gkasprow/Pico-fmeter] Missing Gerber files for front and back panel (Issue #7)
I exported all layers Panel.ziphttps://github.com/user-attachments/files/17472184/Panel.zip
— Reply to this email directly, view it on GitHubhttps://github.com/gkasprow/Pico-fmeter/issues/7#issuecomment-2428511383, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AR3QQF2LPFMPVQ3KKNQGZB3Z4X7M7AVCNFSM6AAAAABQIWNEC6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIMRYGUYTCMZYGM. You are receiving this because you authored the thread.Message ID: @.***>
Done, thank you!
From: Greg Kasprowicz @.> Sent: 22 October 2024 12:02 To: gkasprow/Pico-fmeter @.> Cc: Pilgrim182551 @.>; Author @.> Subject: Re: [gkasprow/Pico-fmeter] Missing Gerber files for front and back panel (Issue #7)
You can import them to Kicad panel.ziphttps://github.com/user-attachments/files/17474253/panel.zip
— Reply to this email directly, view it on GitHubhttps://github.com/gkasprow/Pico-fmeter/issues/7#issuecomment-2428844485, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AR3QQF4Q7NJHGZOXDOREUPTZ4YPCBAVCNFSM6AAAAABQIWNEC6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIMRYHA2DINBYGU. You are receiving this because you authored the thread.Message ID: @.***>
Is there any chance to share the Gerber files for front and back panel? Thx...