search

glennmatthews / cot

Common OVF Tool
MIT License
92 stars 23 forks source link

Enhancement Request - Please add support for Cisco Catalyst 8000v #83

Open morneaup opened 3 years ago

morneaup commented 3 years ago

Please add support for the following class 'com.cisco.c8000v'. This device class is similar to the CISCO CSR1000V.

glennmatthews commented 3 years ago

Ideally for full platform support it would be useful to provide at least the following:

Ideally a fully-populated valid sample .ovf XML file for this platform would also be useful, so that it can be added to the test automation.

I can't promise a lot of time invested in this tool at this time (it's only tangentially related to my current day job) but if the above information is provided it shouldn't be too time-consuming to add the platform.

morneaup commented 3 years ago

Thanks for the quick replay and sorry for not giving you much information. The C8000V is next generation router image for the CSR1000V. The specifications for the image are pretty much the same.

  1. Does this platform support bootstrap configuration via an embedded text file (e.g iosxe_config.txt)? Yes, like CSR1000v.
  2. Does this platform support bootstrap configuration via elements in the OVF XML? (CSR1000v does, most other platforms do not). Yes, like CSR1000v.
  3. What NIC type(s) (E1000, virtio, etc.) does this platform support? Supported adapter types are: VMXNET3, iXGBeVF, i40eVF
  4. What are the min/max supported number of CPUs, amount of RAM, number of NICs, number of serial ports?
  1. How are NICs named/enumerated on this platform? The interface starts with GigabitEthernet1. GigabitEthernet0 is not supported. The default 3 NICs are initially created.

Reference Document: https://www.cisco.com/c/en/us/td/docs/routers/C8000V/Configuration/c8000v-installation-configuration-guide/m_install_vmware_esxi_environment.html

c8000v .OVF File c8000v-universalk9_vga.17.05.01a.txt

Thanks!