Open calestyo opened 2 years ago
some more examples
# ssacli controller all show detail
HPE Smart Array P816i-a SR Gen10 in Slot 0 (Embedded)
Warning: Unrecoverable Media Errors Detected on Drives during previous Rebuild
or Background Surface Analysis (ARM) scan. Errors will be fixed automatically
when the sector(s) are overwritten. Backup and Restore are recommended. The
following logical drives are affected: 4, 5
Bus Interface: PCI
Slot: 0
Serial Number: PWXLH0CRHF002C
RAID 6 Status: Enabled
Controller Status: OK
Hardware Revision: A
Firmware Version: 4.11
Firmware Supports Online Firmware Activation: True
Driver Supports Online Firmware Activation: True
Rebuild Priority: High
Expand Priority: Medium
Surface Scan Delay: 3 secs
Surface Scan Mode: Idle
Parallel Surface Scan Supported: Yes
Current Parallel Surface Scan Count: 1
Max Parallel Surface Scan Count: 16
Queue Depth: Automatic
Monitor and Performance Delay: 60 min
Elevator Sort: Enabled
Degraded Performance Optimization: Disabled
Inconsistency Repair Policy: Disabled
Write Cache Bypass Threshold Size: 1040 KiB
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: 0 secs
Cache Board Present: True
Cache Status: OK
Cache Ratio: 10% Read / 90% Write
Configured Drive Write Cache Policy: Disable
Unconfigured Drive Write Cache Policy: Default
Total Cache Size: 4.0
Total Cache Memory Available: 3.8
Battery Backed Cache Size: 3.8
No-Battery Write Cache: Disabled
SSD Caching RAID5 WriteBack Enabled: True
SSD Caching Version: 2
Cache Backup Power Source: Batteries
Battery/Capacitor Count: 1
Battery/Capacitor Status: OK
SATA NCQ Supported: True
Spare Activation Mode: Activate on physical drive failure (default)
Controller Temperature (C): 55
Capacitor Temperature (C): 42
Number of Ports: 4 Internal only
Encryption: Not Set
Express Local Encryption: False
Driver Name: smartpqi
Driver Version: Linux 1.2.16-010
PCI Address (Domain:Bus:Device.Function): 0000:62:00.0
Negotiated PCIe Data Rate: PCIe 3.0 x8 (7880 MB/s)
Controller Mode: Mixed
Port Max Phy Rate Limiting Supported: False
Latency Scheduler Setting: Disabled
Current Power Mode: MaxPerformance
Survival Mode: Enabled
Host Serial Number: CZJ11703R4
Sanitize Erase Supported: True
Sanitize Lock: None
Sensor ID: 0
Location: Capacitor
Current Value (C): 42
Max Value Since Power On: 45
Sensor ID: 1
Location: ASIC
Current Value (C): 55
Max Value Since Power On: 58
Sensor ID: 2
Location: Unknown
Current Value (C): 40
Max Value Since Power On: 43
Primary Boot Volume: None
Secondary Boot Volume: None
# ssacli controller all show config
HPE Smart Array P816i-a SR Gen10 in Slot 0 (Embedded) (sn: PWXLH0CRHF002C)
Apollo 4200 LFF at Port 1I, Box 1, OK
Apollo 4200 LFF at Port 3I, Box 1, OK
Port Name: 1I (Mixed)
Port Name: 2I (Mixed)
Port Name: 3I (Mixed)
Port Name: 4I (Mixed)
Array A (Solid State SATA, Unused Space: 0 MB)
logicaldrive 1 (447.10 GB, RAID 1, OK)
physicaldrive 3I:1:15 (port 3I:box 1:bay 15, SATA SSD, 480 GB, OK)
physicaldrive 3I:1:16 (port 3I:box 1:bay 16, SATA SSD, 480 GB, OK)
Array B (SAS, Unused Space: 0 MB)
logicaldrive 2 (16.00 TB, RAID 6, OK)
logicaldrive 3 (16.00 TB, RAID 6, OK)
Warning: Unrecoverable Media Errors Detected on Drives during previous Rebuild
or Background Surface Analysis (ARM) scan. Errors will be fixed automatically
when the sector(s) are overwritten. Backup and Restore are recommended.
logicaldrive 4 (16.00 TB, RAID 6, OK)
Warning: Unrecoverable Media Errors Detected on Drives during previous Rebuild
or Background Surface Analysis (ARM) scan. Errors will be fixed automatically
when the sector(s) are overwritten. Backup and Restore are recommended.
logicaldrive 5 (16.00 TB, RAID 6, OK)
logicaldrive 6 (16.00 TB, RAID 6, OK)
logicaldrive 7 (16.00 TB, RAID 6, OK)
logicaldrive 8 (16.00 TB, RAID 6, OK)
logicaldrive 9 (16.00 TB, RAID 6, OK)
logicaldrive 10 (16.00 TB, RAID 6, OK)
logicaldrive 11 (16.00 TB, RAID 6, OK)
logicaldrive 12 (14.60 TB, RAID 6, OK)
logicaldrive 13 (32.00 GB, RAID 6, OK)
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:6 (port 1I:box 1:bay 6, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:7 (port 1I:box 1:bay 7, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:8 (port 1I:box 1:bay 8, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:9 (port 1I:box 1:bay 9, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:10 (port 1I:box 1:bay 10, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:11 (port 1I:box 1:bay 11, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:12 (port 1I:box 1:bay 12, SAS HDD, 16 TB, OK)
physicaldrive 3I:1:13 (port 3I:box 1:bay 13, SAS HDD, 16 TB, Predictive Failure)
physicaldrive 3I:1:14 (port 3I:box 1:bay 14, SAS HDD, 16 TB, OK)
Enclosure SEP (Vendor ID HPE, Model Apollo 4200 LFF) 375 (WWID: 5001438043D6A63C, Port: 3I, Box: 1)
Enclosure SEP (Vendor ID HPE, Model Apollo 4200 LFF) 376 (WWID: 5001438043D60E3C, Port: 1I, Box: 1)
Expander 377 (WWID: 5001438043D6A63D, Port: 3I, Box: 1)
Expander 378 (WWID: 5001438043D60E3D, Port: 1I, Box: 1)
SEP (Vendor ID HPE, Model Smart Adapter) 379 (WWID: 51402EC0167D2450)
# ssacli controller slot=0 physicaldrive all show
HPE Smart Array P816i-a SR Gen10 in Slot 0 (Embedded)
Array A
physicaldrive 3I:1:15 (port 3I:box 1:bay 15, SATA SSD, 480 GB, OK)
physicaldrive 3I:1:16 (port 3I:box 1:bay 16, SATA SSD, 480 GB, OK)
Array B
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:6 (port 1I:box 1:bay 6, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:7 (port 1I:box 1:bay 7, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:8 (port 1I:box 1:bay 8, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:9 (port 1I:box 1:bay 9, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:10 (port 1I:box 1:bay 10, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:11 (port 1I:box 1:bay 11, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:12 (port 1I:box 1:bay 12, SAS HDD, 16 TB, OK)
physicaldrive 3I:1:13 (port 3I:box 1:bay 13, SAS HDD, 16 TB, Predictive Failure)
physicaldrive 3I:1:14 (port 3I:box 1:bay 14, SAS HDD, 16 TB, OK)
# ssacli controller slot=0 logicaldrive all show
HPE Smart Array P816i-a SR Gen10 in Slot 0 (Embedded)
Array A
logicaldrive 1 (447.10 GB, RAID 1, OK)
Array B
logicaldrive 2 (16.00 TB, RAID 6, OK)
logicaldrive 3 (16.00 TB, RAID 6, OK)
Warning: Unrecoverable Media Errors Detected on Drives during previous Rebuild
or Background Surface Analysis (ARM) scan. Errors will be fixed automatically
when the sector(s) are overwritten. Backup and Restore are recommended.
logicaldrive 4 (16.00 TB, RAID 6, OK)
Warning: Unrecoverable Media Errors Detected on Drives during previous Rebuild
or Background Surface Analysis (ARM) scan. Errors will be fixed automatically
when the sector(s) are overwritten. Backup and Restore are recommended.
logicaldrive 5 (16.00 TB, RAID 6, OK)
logicaldrive 6 (16.00 TB, RAID 6, OK)
logicaldrive 7 (16.00 TB, RAID 6, OK)
logicaldrive 8 (16.00 TB, RAID 6, OK)
logicaldrive 9 (16.00 TB, RAID 6, OK)
logicaldrive 10 (16.00 TB, RAID 6, OK)
logicaldrive 11 (16.00 TB, RAID 6, OK)
logicaldrive 12 (14.60 TB, RAID 6, OK)
logicaldrive 13 (32.00 GB, RAID 6, OK)
# ssacli ctrl all show config detail
HPE Smart Array P816i-a SR Gen10 in Slot 0 (Embedded)
Warning: Unrecoverable Media Errors Detected on Drives during previous Rebuild
or Background Surface Analysis (ARM) scan. Errors will be fixed automatically
when the sector(s) are overwritten. Backup and Restore are recommended. The
following logical drives are affected: 4, 5
Bus Interface: PCI
Slot: 0
Serial Number: PWXLH0CRHF002C
RAID 6 Status: Enabled
Controller Status: OK
Hardware Revision: A
Firmware Version: 4.11
Firmware Supports Online Firmware Activation: True
Driver Supports Online Firmware Activation: True
Rebuild Priority: High
Expand Priority: Medium
Surface Scan Delay: 3 secs
Surface Scan Mode: Idle
Parallel Surface Scan Supported: Yes
Current Parallel Surface Scan Count: 1
Max Parallel Surface Scan Count: 16
Queue Depth: Automatic
Monitor and Performance Delay: 60 min
Elevator Sort: Enabled
Degraded Performance Optimization: Disabled
Inconsistency Repair Policy: Disabled
Write Cache Bypass Threshold Size: 1040 KiB
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: 0 secs
Cache Board Present: True
Cache Status: OK
Cache Ratio: 10% Read / 90% Write
Configured Drive Write Cache Policy: Disable
Unconfigured Drive Write Cache Policy: Default
Total Cache Size: 4.0
Total Cache Memory Available: 3.8
Battery Backed Cache Size: 3.8
No-Battery Write Cache: Disabled
SSD Caching RAID5 WriteBack Enabled: True
SSD Caching Version: 2
Cache Backup Power Source: Batteries
Battery/Capacitor Count: 1
Battery/Capacitor Status: OK
SATA NCQ Supported: True
Spare Activation Mode: Activate on physical drive failure (default)
Controller Temperature (C): 55
Capacitor Temperature (C): 42
Number of Ports: 4 Internal only
Encryption: Not Set
Express Local Encryption: False
Driver Name: smartpqi
Driver Version: Linux 1.2.16-010
PCI Address (Domain:Bus:Device.Function): 0000:62:00.0
Negotiated PCIe Data Rate: PCIe 3.0 x8 (7880 MB/s)
Controller Mode: Mixed
Port Max Phy Rate Limiting Supported: False
Latency Scheduler Setting: Disabled
Current Power Mode: MaxPerformance
Survival Mode: Enabled
Host Serial Number: CZJ11703R4
Sanitize Erase Supported: True
Sanitize Lock: None
Sensor ID: 0
Location: Capacitor
Current Value (C): 42
Max Value Since Power On: 45
Sensor ID: 1
Location: ASIC
Current Value (C): 55
Max Value Since Power On: 58
Sensor ID: 2
Location: Unknown
Current Value (C): 40
Max Value Since Power On: 43
Primary Boot Volume: None
Secondary Boot Volume: None
Apollo 4200 LFF at Port 1I, Box 1, OK
Power Supply Status: Not Redundant
Vendor ID: HPE
Serial Number: PESZP0BRHEU0JS
Firmware Version: 1.79
Drive Bays: 12
Port: 1I
Box: 1
Location: Internal
Active Path: 1I:1, OK
Active Path: 2I:1, OK
Expander 378
Device Number: 378
Firmware Version: 1.79
WWID: 5001438043D60E3D
Port: 1I
Box: 1
Vendor ID: HPE
Enclosure SEP (Vendor ID HPE, Model Apollo 4200 LFF) 376
Device Number: 376
Firmware Version: 1.79
WWID: 5001438043D60E3C
Port: 1I
Box: 1
Vendor ID: HPE
Model: Apollo 4200 LFF
Physical Drives
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:6 (port 1I:box 1:bay 6, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:7 (port 1I:box 1:bay 7, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:8 (port 1I:box 1:bay 8, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:9 (port 1I:box 1:bay 9, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:10 (port 1I:box 1:bay 10, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:11 (port 1I:box 1:bay 11, SAS HDD, 16 TB, OK)
physicaldrive 1I:1:12 (port 1I:box 1:bay 12, SAS HDD, 16 TB, OK)
Apollo 4200 LFF at Port 3I, Box 1, OK
Power Supply Status: Not Redundant
Vendor ID: HPE
Serial Number: PESZP0BRHEU0KU
Firmware Version: 1.79
Drive Bays: 12
Port: 3I
Box: 1
Location: Internal
Active Path: 3I:1, OK
Active Path: 4I:1, OK
Expander 377
Device Number: 377
Firmware Version: 1.79
WWID: 5001438043D6A63D
Port: 3I
Box: 1
Vendor ID: HPE
Enclosure SEP (Vendor ID HPE, Model Apollo 4200 LFF) 375
Device Number: 375
Firmware Version: 1.79
WWID: 5001438043D6A63C
Port: 3I
Box: 1
Vendor ID: HPE
Model: Apollo 4200 LFF
Physical Drives
physicaldrive 3I:1:13 (port 3I:box 1:bay 13, SAS HDD, 16 TB, Predictive Failure)
physicaldrive 3I:1:14 (port 3I:box 1:bay 14, SAS HDD, 16 TB, OK)
physicaldrive 3I:1:15 (port 3I:box 1:bay 15, SATA SSD, 480 GB, OK)
physicaldrive 3I:1:16 (port 3I:box 1:bay 16, SATA SSD, 480 GB, OK)
Port Name: 1I
Port ID: 0
Port Mode: Mixed
Port Connection Number: 0
SAS Address: 51402EC0167D2440
Port Location: Internal
Port Name: 2I
Port ID: 1
Port Mode: Mixed
Port Connection Number: 1
SAS Address: 51402EC0167D2444
Port Location: Internal
Port Name: 3I
Port ID: 2
Port Mode: Mixed
Port Connection Number: 2
SAS Address: 51402EC0167D2448
Port Location: Internal
Port Name: 4I
Port ID: 3
Port Mode: Mixed
Port Connection Number: 3
SAS Address: 51402EC0167D244C
Port Location: Internal
Array: A
Interface Type: Solid State SATA
Unused Space: 0 MB (0.00%)
Used Space: 894.20 GB (100.00%)
Status: OK
MultiDomain Status: OK
Array Type: Data
Smart Path: enable
Logical Drive: 1
Size: 447.10 GB
Fault Tolerance: 1
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 256 KB
Full Stripe Size: 256 KB
Status: OK
Unrecoverable Media Errors: None
MultiDomain Status: OK
Caching: Disabled
Unique Identifier: 600508B1001C95525F17C2427C5D7FA2
Disk Name: /dev/sda
Mount Points: 446.1 GiB Partition 2, 1023 MiB Partition 1 /, /boot/efi
Disk Partition Information
Partition 2: Basic, 446.1 GiB, /
Partition 1: Basic, 1023 MiB, /boot/efi
Logical Drive Label: system
Mirror Group 1:
physicaldrive 3I:1:15 (port 3I:box 1:bay 15, SATA SSD, 480 GB, OK)
Mirror Group 2:
physicaldrive 3I:1:16 (port 3I:box 1:bay 16, SATA SSD, 480 GB, OK)
Drive Type: Data
LD Acceleration Method: Smart Path
physicaldrive 3I:1:15
Port: 3I
Box: 1
Bay: 15
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 480 GB
Drive exposed to OS: False
Logical/Physical Block Size: 512/4096
Firmware Revision: HPG1
Serial Number: 20372D53A88C
WWID: 5001438043D6A602
Model: ATA VK000480GXAWK
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 34
Maximum Temperature (C): 43
Usage remaining: 99.92%
Power On Hours: 6261
Estimated Life Remaining based on workload to date: 325832 days
SSD Smart Trip Wearout: False
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
PHY Physical Link Rate: 6.0Gbps
PHY Maximum Link Rate: 6.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: True
Sanitize Freeze Lock Supported: True
Sanitize Anti-Freeze Lock Supported: True
Sanitize Lock: None
Sanitize Estimated Max Erase Time: 1 minute(s), 5 second(s)
Unrestricted Sanitize Supported: True
Shingled Magnetic Recording Support: None
Drive Unique ID: B71CCA70B48385F7
Self Encrypting Drive: False
physicaldrive 3I:1:16
Port: 3I
Box: 1
Bay: 16
Status: OK
Drive Type: Data Drive
Interface Type: Solid State SATA
Size: 480 GB
Drive exposed to OS: False
Logical/Physical Block Size: 512/4096
Firmware Revision: HPG1
Serial Number: 20372D53A8BB
WWID: 5001438043D6A603
Model: ATA VK000480GXAWK
SATA NCQ Capable: True
SATA NCQ Enabled: True
Current Temperature (C): 32
Maximum Temperature (C): 40
Usage remaining: 99.92%
Power On Hours: 6261
Estimated Life Remaining based on workload to date: 325832 days
SSD Smart Trip Wearout: False
PHY Count: 1
PHY Transfer Rate: 6.0Gbps
PHY Physical Link Rate: 6.0Gbps
PHY Maximum Link Rate: 6.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: True
Sanitize Freeze Lock Supported: True
Sanitize Anti-Freeze Lock Supported: True
Sanitize Lock: None
Sanitize Estimated Max Erase Time: 1 minute(s), 5 second(s)
Unrestricted Sanitize Supported: True
Shingled Magnetic Recording Support: None
Drive Unique ID: C6ED8C99FF9202FF
Self Encrypting Drive: False
Array: B
Interface Type: SAS
Unused Space: 0 MB (0.00%)
Used Space: 203.74 TB (100.00%)
Status: OK
MultiDomain Status: OK
Array Type: Data
Smart Path: disable
Logical Drive: 2
Size: 16.00 TB
Fault Tolerance: 6
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 512 KB
Full Stripe Size: 6144 KB
Status: OK
Unrecoverable Media Errors: None
MultiDomain Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Completed
Unique Identifier: 600508B1001C8552A4A98DAA38D9D6BD
Disk Name: /dev/sdd
Mount Points: 16.0 TiB Partition 0 /srv/dcache/pools/meta/a/0/data
Disk Partition Information
Partition 0: Basic, 16.0 TiB, /srv/dcache/pools/meta/a/0/data
Logical Drive Label: data-a-0
Drive Type: Data
LD Acceleration Method: Controller Cache
Logical Drive: 3
Size: 16.00 TB
Fault Tolerance: 6
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 512 KB
Full Stripe Size: 6144 KB
Status: OK
Unrecoverable Media Errors: None
MultiDomain Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Completed
Unique Identifier: 600508B1001C05B6E4302BB23614AB34
Disk Name: /dev/sdb
Mount Points: 16.0 TiB Partition 0 /srv/dcache/pools/meta/a/1/data
Disk Partition Information
Partition 0: Basic, 16.0 TiB, /srv/dcache/pools/meta/a/1/data
Logical Drive Label: data-a-1
Drive Type: Data
LD Acceleration Method: Controller Cache
Warning: Unrecoverable Media Errors Detected on Drives during previous Rebuild
or Background Surface Analysis (ARM) scan. Errors will be fixed automatically
when the sector(s) are overwritten. Backup and Restore are recommended.
Logical Drive: 4
Size: 16.00 TB
Fault Tolerance: 6
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 512 KB
Full Stripe Size: 6144 KB
Status: OK
Unrecoverable Media Errors: Detected
MultiDomain Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Completed
Unique Identifier: 600508B1001C9742A823112B060CC885
Disk Name: /dev/sde
Mount Points: 16.0 TiB Partition 0 /srv/dcache/pools/meta/a/2/data
Disk Partition Information
Partition 0: Basic, 16.0 TiB, /srv/dcache/pools/meta/a/2/data
Logical Drive Label: data-a-2
Drive Type: Data
LD Acceleration Method: Controller Cache
Warning: Unrecoverable Media Errors Detected on Drives during previous Rebuild
or Background Surface Analysis (ARM) scan. Errors will be fixed automatically
when the sector(s) are overwritten. Backup and Restore are recommended.
Logical Drive: 5
Size: 16.00 TB
Fault Tolerance: 6
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 512 KB
Full Stripe Size: 6144 KB
Status: OK
Unrecoverable Media Errors: Detected
MultiDomain Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Completed
Unique Identifier: 600508B1001CE021DF21F5EF83705F4F
Disk Name: /dev/sdc
Mount Points: 16.0 TiB Partition 0 /srv/dcache/pools/meta/a/3/data
Disk Partition Information
Partition 0: Basic, 16.0 TiB, /srv/dcache/pools/meta/a/3/data
Logical Drive Label: data-a-3
Drive Type: Data
LD Acceleration Method: Controller Cache
Logical Drive: 6
Size: 16.00 TB
Fault Tolerance: 6
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 512 KB
Full Stripe Size: 6144 KB
Status: OK
Unrecoverable Media Errors: None
MultiDomain Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Completed
Unique Identifier: 600508B1001C7B71642E863F2DD2FCAB
Disk Name: /dev/sdg
Mount Points: 16.0 TiB Partition 0 /srv/dcache/pools/meta/a/4/data
Disk Partition Information
Partition 0: Basic, 16.0 TiB, /srv/dcache/pools/meta/a/4/data
Logical Drive Label: data-a-4
Drive Type: Data
LD Acceleration Method: Controller Cache
Logical Drive: 7
Size: 16.00 TB
Fault Tolerance: 6
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 512 KB
Full Stripe Size: 6144 KB
Status: OK
Unrecoverable Media Errors: None
MultiDomain Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Completed
Unique Identifier: 600508B1001CF77CC9DABA4EC15DC0B2
Disk Name: /dev/sdh
Mount Points: 16.0 TiB Partition 0 /srv/dcache/pools/meta/a/5/data
Disk Partition Information
Partition 0: Basic, 16.0 TiB, /srv/dcache/pools/meta/a/5/data
Logical Drive Label: data-a-5
Drive Type: Data
LD Acceleration Method: Controller Cache
Logical Drive: 8
Size: 16.00 TB
Fault Tolerance: 6
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 512 KB
Full Stripe Size: 6144 KB
Status: OK
Unrecoverable Media Errors: None
MultiDomain Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Completed
Unique Identifier: 600508B1001C7786AC2BF1514208A99E
Disk Name: /dev/sdf
Mount Points: 16.0 TiB Partition 0 /srv/dcache/pools/meta/a/6/data
Disk Partition Information
Partition 0: Basic, 16.0 TiB, /srv/dcache/pools/meta/a/6/data
Logical Drive Label: data-a-6
Drive Type: Data
LD Acceleration Method: Controller Cache
Logical Drive: 9
Size: 16.00 TB
Fault Tolerance: 6
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 512 KB
Full Stripe Size: 6144 KB
Status: OK
Unrecoverable Media Errors: None
MultiDomain Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Completed
Unique Identifier: 600508B1001CEB0DA77F0A109E0DDD2A
Disk Name: /dev/sdi
Mount Points: 16.0 TiB Partition 0 /srv/dcache/pools/meta/a/7/data
Disk Partition Information
Partition 0: Basic, 16.0 TiB, /srv/dcache/pools/meta/a/7/data
Logical Drive Label: data-a-7
Drive Type: Data
LD Acceleration Method: Controller Cache
Logical Drive: 10
Size: 16.00 TB
Fault Tolerance: 6
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 512 KB
Full Stripe Size: 6144 KB
Status: OK
Unrecoverable Media Errors: None
MultiDomain Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Completed
Unique Identifier: 600508B1001C22E53F9085EEA5355739
Disk Name: /dev/sdk
Mount Points: 16.0 TiB Partition 0 /srv/dcache/pools/meta/a/8/data
Disk Partition Information
Partition 0: Basic, 16.0 TiB, /srv/dcache/pools/meta/a/8/data
Logical Drive Label: data-a-8
Drive Type: Data
LD Acceleration Method: Controller Cache
Logical Drive: 11
Size: 16.00 TB
Fault Tolerance: 6
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 512 KB
Full Stripe Size: 6144 KB
Status: OK
Unrecoverable Media Errors: None
MultiDomain Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Completed
Unique Identifier: 600508B1001C294C19B603A162D37DD9
Disk Name: /dev/sdj
Mount Points: 16.0 TiB Partition 0 /srv/dcache/pools/meta/a/9/data
Disk Partition Information
Partition 0: Basic, 16.0 TiB, /srv/dcache/pools/meta/a/9/data
Logical Drive Label: data-a-9
Drive Type: Data
LD Acceleration Method: Controller Cache
Logical Drive: 12
Size: 14.60 TB
Fault Tolerance: 6
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 512 KB
Full Stripe Size: 6144 KB
Status: OK
Unrecoverable Media Errors: None
MultiDomain Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Completed
Unique Identifier: 600508B1001CEEA59191C7B0E9912BB4
Disk Name: /dev/sdl
Mount Points: 14.6 TiB Partition 0 /srv/dcache/pools/meta/a/10/data
Disk Partition Information
Partition 0: Basic, 14.6 TiB, /srv/dcache/pools/meta/a/10/data
Logical Drive Label: data-a-10
Drive Type: Data
LD Acceleration Method: Controller Cache
Logical Drive: 13
Size: 32.00 GB
Fault Tolerance: 6
Heads: 255
Sectors Per Track: 32
Cylinders: 8225
Strip Size: 512 KB
Full Stripe Size: 6144 KB
Status: OK
Unrecoverable Media Errors: None
MultiDomain Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Completed
Unique Identifier: 600508B1001C2996BA86CD6677659775
Disk Name: /dev/sdm
Mount Points: 32.0 GiB Partition 0 /srv/dcache/pools/meta/a
Disk Partition Information
Partition 0: Basic, 32.0 GiB, /srv/dcache/pools/meta/a
Logical Drive Label: data-a-meta
Drive Type: Data
LD Acceleration Method: Controller Cache
physicaldrive 1I:1:1
Port: 1I
Box: 1
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 16 TB
Drive exposed to OS: False
Logical/Physical Block Size: 512/4096
Rotational Speed: 7200
Firmware Revision: HPD2
Serial Number: ZL2GENW6
WWID: 5000C500CBD9DBAD
Model: HPE MB016000JWZHE
Current Temperature (C): 31
Maximum Temperature (C): 35
PHY Count: 2
PHY Transfer Rate: 12.0Gbps, Unknown
PHY Physical Link Rate: 12.0Gbps, Unknown
PHY Maximum Link Rate: 12.0Gbps, 12.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: True
Sanitize Estimated Max Erase Time: 25 hour(s), 0 minute(s)
Unrestricted Sanitize Supported: True
Shingled Magnetic Recording Support: None
Drive Unique ID: 5000C500CBD9DBAF
Self Encrypting Drive: False
physicaldrive 1I:1:2
Port: 1I
Box: 1
Bay: 2
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 16 TB
Drive exposed to OS: False
Logical/Physical Block Size: 512/4096
Rotational Speed: 7200
Firmware Revision: HPD2
Serial Number: ZL2GEK5F
WWID: 5000C500CBDA9981
Model: HPE MB016000JWZHE
Current Temperature (C): 33
Maximum Temperature (C): 38
PHY Count: 2
PHY Transfer Rate: 12.0Gbps, Unknown
PHY Physical Link Rate: 12.0Gbps, Unknown
PHY Maximum Link Rate: 12.0Gbps, 12.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: True
Sanitize Estimated Max Erase Time: 25 hour(s), 0 minute(s)
Unrestricted Sanitize Supported: True
Shingled Magnetic Recording Support: None
Drive Unique ID: 5000C500CBDA9983
Self Encrypting Drive: False
physicaldrive 1I:1:3
Port: 1I
Box: 1
Bay: 3
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 16 TB
Drive exposed to OS: False
Logical/Physical Block Size: 512/4096
Rotational Speed: 7200
Firmware Revision: HPD2
Serial Number: ZL2GEMVH
WWID: 5000C500CBDA0E9D
Model: HPE MB016000JWZHE
Current Temperature (C): 33
Maximum Temperature (C): 37
PHY Count: 2
PHY Transfer Rate: 12.0Gbps, Unknown
PHY Physical Link Rate: 12.0Gbps, Unknown
PHY Maximum Link Rate: 12.0Gbps, 12.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: True
Sanitize Estimated Max Erase Time: 25 hour(s), 0 minute(s)
Unrestricted Sanitize Supported: True
Shingled Magnetic Recording Support: None
Drive Unique ID: 5000C500CBDA0E9F
Self Encrypting Drive: False
physicaldrive 1I:1:4
Port: 1I
Box: 1
Bay: 4
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 16 TB
Drive exposed to OS: False
Logical/Physical Block Size: 512/4096
Rotational Speed: 7200
Firmware Revision: HPD2
Serial Number: ZL2GEH2Y
WWID: 5000C500CBDB23B1
Model: HPE MB016000JWZHE
Current Temperature (C): 32
Maximum Temperature (C): 36
PHY Count: 2
PHY Transfer Rate: 12.0Gbps, Unknown
PHY Physical Link Rate: 12.0Gbps, Unknown
PHY Maximum Link Rate: 12.0Gbps, 12.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: True
Sanitize Estimated Max Erase Time: 25 hour(s), 0 minute(s)
Unrestricted Sanitize Supported: True
Shingled Magnetic Recording Support: None
Drive Unique ID: 5000C500CBDB23B3
Self Encrypting Drive: False
physicaldrive 1I:1:5
Port: 1I
Box: 1
Bay: 5
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 16 TB
Drive exposed to OS: False
Logical/Physical Block Size: 512/4096
Rotational Speed: 7200
Firmware Revision: HPD2
Serial Number: ZL2GEHKT
WWID: 5000C500CBDB0739
Model: HPE MB016000JWZHE
Current Temperature (C): 33
Maximum Temperature (C): 38
PHY Count: 2
PHY Transfer Rate: 12.0Gbps, Unknown
PHY Physical Link Rate: 12.0Gbps, Unknown
PHY Maximum Link Rate: 12.0Gbps, 12.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: True
Sanitize Estimated Max Erase Time: 25 hour(s), 0 minute(s)
Unrestricted Sanitize Supported: True
Shingled Magnetic Recording Support: None
Drive Unique ID: 5000C500CBDB073B
Self Encrypting Drive: False
physicaldrive 1I:1:6
Port: 1I
Box: 1
Bay: 6
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 16 TB
Drive exposed to OS: False
Logical/Physical Block Size: 512/4096
Rotational Speed: 7200
Firmware Revision: HPD2
Serial Number: ZL2GEJ5H
WWID: 5000C500CBDAE221
Model: HPE MB016000JWZHE
Current Temperature (C): 32
Maximum Temperature (C): 36
PHY Count: 2
PHY Transfer Rate: 12.0Gbps, Unknown
PHY Physical Link Rate: 12.0Gbps, Unknown
PHY Maximum Link Rate: 12.0Gbps, 12.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: True
Sanitize Estimated Max Erase Time: 25 hour(s), 0 minute(s)
Unrestricted Sanitize Supported: True
Shingled Magnetic Recording Support: None
Drive Unique ID: 5000C500CBDAE223
Self Encrypting Drive: False
physicaldrive 1I:1:7
Port: 1I
Box: 1
Bay: 7
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 16 TB
Drive exposed to OS: False
Logical/Physical Block Size: 512/4096
Rotational Speed: 7200
Firmware Revision: HPD2
Serial Number: ZL2GEN4T
WWID: 5000C500CBDA01D9
Model: HPE MB016000JWZHE
Current Temperature (C): 31
Maximum Temperature (C): 36
PHY Count: 2
PHY Transfer Rate: 12.0Gbps, Unknown
PHY Physical Link Rate: 12.0Gbps, Unknown
PHY Maximum Link Rate: 12.0Gbps, 12.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: True
Sanitize Estimated Max Erase Time: 25 hour(s), 0 minute(s)
Unrestricted Sanitize Supported: True
Shingled Magnetic Recording Support: None
Drive Unique ID: 5000C500CBDA01DB
Self Encrypting Drive: False
physicaldrive 1I:1:8
Port: 1I
Box: 1
Bay: 8
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 16 TB
Drive exposed to OS: False
Logical/Physical Block Size: 512/4096
Rotational Speed: 7200
Firmware Revision: HPD2
Serial Number: ZL2GEKB6
WWID: 5000C500CBDA93B5
Model: HPE MB016000JWZHE
Current Temperature (C): 32
Maximum Temperature (C): 37
PHY Count: 2
PHY Transfer Rate: 12.0Gbps, Unknown
PHY Physical Link Rate: 12.0Gbps, Unknown
PHY Maximum Link Rate: 12.0Gbps, 12.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: True
Sanitize Estimated Max Erase Time: 25 hour(s), 0 minute(s)
Unrestricted Sanitize Supported: True
Shingled Magnetic Recording Support: None
Drive Unique ID: 5000C500CBDA93B7
Self Encrypting Drive: False
physicaldrive 1I:1:9
Port: 1I
Box: 1
Bay: 9
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 16 TB
Drive exposed to OS: False
Logical/Physical Block Size: 512/4096
Rotational Speed: 7200
Firmware Revision: HPD2
Serial Number: ZL2GEKT4
WWID: 5000C500CBDA5F19
Model: HPE MB016000JWZHE
Current Temperature (C): 30
Maximum Temperature (C): 35
PHY Count: 2
PHY Transfer Rate: 12.0Gbps, Unknown
PHY Physical Link Rate: 12.0Gbps, Unknown
PHY Maximum Link Rate: 12.0Gbps, 12.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: True
Sanitize Estimated Max Erase Time: 25 hour(s), 0 minute(s)
Unrestricted Sanitize Supported: True
Shingled Magnetic Recording Support: None
Drive Unique ID: 5000C500CBDA5F1B
Self Encrypting Drive: False
physicaldrive 1I:1:10
Port: 1I
Box: 1
Bay: 10
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 16 TB
Drive exposed to OS: False
Logical/Physical Block Size: 512/4096
Rotational Speed: 7200
Firmware Revision: HPD2
Serial Number: ZL2GEJ9S
WWID: 5000C500CBDAD939
Model: HPE MB016000JWZHE
Current Temperature (C): 30
Maximum Temperature (C): 35
PHY Count: 2
PHY Transfer Rate: 12.0Gbps, Unknown
PHY Physical Link Rate: 12.0Gbps, Unknown
PHY Maximum Link Rate: 12.0Gbps, 12.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: True
Sanitize Estimated Max Erase Time: 25 hour(s), 0 minute(s)
Unrestricted Sanitize Supported: True
Shingled Magnetic Recording Support: None
Drive Unique ID: 5000C500CBDAD93B
Self Encrypting Drive: False
physicaldrive 1I:1:11
Port: 1I
Box: 1
Bay: 11
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 16 TB
Drive exposed to OS: False
Logical/Physical Block Size: 512/4096
Rotational Speed: 7200
Firmware Revision: HPD2
Serial Number: ZL2GEJW2
WWID: 5000C500CBDAB015
Model: HPE MB016000JWZHE
Current Temperature (C): 31
Maximum Temperature (C): 37
PHY Count: 2
PHY Transfer Rate: 12.0Gbps, Unknown
PHY Physical Link Rate: 12.0Gbps, Unknown
PHY Maximum Link Rate: 12.0Gbps, 12.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: True
Sanitize Estimated Max Erase Time: 25 hour(s), 0 minute(s)
Unrestricted Sanitize Supported: True
Shingled Magnetic Recording Support: None
Drive Unique ID: 5000C500CBDAB017
Self Encrypting Drive: False
physicaldrive 1I:1:12
Port: 1I
Box: 1
Bay: 12
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 16 TB
Drive exposed to OS: False
Logical/Physical Block Size: 512/4096
Rotational Speed: 7200
Firmware Revision: HPD2
Serial Number: ZL2GEK34
WWID: 5000C500CBDA9741
Model: HPE MB016000JWZHE
Current Temperature (C): 30
Maximum Temperature (C): 35
PHY Count: 2
PHY Transfer Rate: 12.0Gbps, Unknown
PHY Physical Link Rate: 12.0Gbps, Unknown
PHY Maximum Link Rate: 12.0Gbps, 12.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: True
Sanitize Estimated Max Erase Time: 25 hour(s), 0 minute(s)
Unrestricted Sanitize Supported: True
Shingled Magnetic Recording Support: None
Drive Unique ID: 5000C500CBDA9743
Self Encrypting Drive: False
physicaldrive 3I:1:13
Port: 3I
Box: 1
Bay: 13
Status: Predictive Failure
Drive Type: Data Drive
Interface Type: SAS
Size: 16 TB
Drive exposed to OS: False
Logical/Physical Block Size: 512/4096
Rotational Speed: 7200
Firmware Revision: HPD0
Serial Number: ZL2GEHXD
WWID: 5000C500CBDAF03D
Model: HP MB016000JWZHE
Current Temperature (C): 37
Maximum Temperature (C): 43
PHY Count: 2
PHY Transfer Rate: 12.0Gbps, Unknown
PHY Physical Link Rate: 12.0Gbps, Unknown
PHY Maximum Link Rate: 12.0Gbps, 12.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: True
Sanitize Estimated Max Erase Time: 25 hour(s), 0 minute(s)
Unrestricted Sanitize Supported: True
Shingled Magnetic Recording Support: None
Drive Unique ID: 5000C500CBDAF03F
Self Encrypting Drive: False
physicaldrive 3I:1:14
Port: 3I
Box: 1
Bay: 14
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 16 TB
Drive exposed to OS: False
Logical/Physical Block Size: 512/4096
Rotational Speed: 7200
Firmware Revision: HPD2
Serial Number: ZL2GEJHD
WWID: 5000C500CBDACB85
Model: HPE MB016000JWZHE
Current Temperature (C): 39
Maximum Temperature (C): 45
PHY Count: 2
PHY Transfer Rate: 12.0Gbps, Unknown
PHY Physical Link Rate: 12.0Gbps, Unknown
PHY Maximum Link Rate: 12.0Gbps, 12.0Gbps
Drive Authentication Status: Not Applicable
Sanitize Erase Supported: True
Sanitize Estimated Max Erase Time: 25 hour(s), 0 minute(s)
Unrestricted Sanitize Supported: True
Shingled Magnetic Recording Support: None
Drive Unique ID: 5000C500CBDACB87
Self Encrypting Drive: False
Enclosure SEP (Vendor ID HPE, Model Apollo 4200 LFF) 375
Device Number: 375
Firmware Version: 1.79
WWID: 5001438043D6A63C
Port: 3I
Box: 1
Vendor ID: HPE
Model: Apollo 4200 LFF
Enclosure SEP (Vendor ID HPE, Model Apollo 4200 LFF) 376
Device Number: 376
Firmware Version: 1.79
WWID: 5001438043D60E3C
Port: 1I
Box: 1
Vendor ID: HPE
Model: Apollo 4200 LFF
Expander 377
Device Number: 377
Firmware Version: 1.79
WWID: 5001438043D6A63D
Port: 3I
Box: 1
Vendor ID: HPE
Expander 378
Device Number: 378
Firmware Version: 1.79
WWID: 5001438043D60E3D
Port: 1I
Box: 1
Vendor ID: HPE
SEP (Vendor ID HPE, Model Smart Adapter) 379
Device Number: 379
Firmware Version: 4.11
WWID: 51402EC0167D2450
Vendor ID: HPE
Model: Smart Adapter
Hey.
IIRC, for some RAID tools you consider the information whether the physical drives have some "predictive failure" (e.g. as determined by the controller via SMART).
We have now HPE SmartArray controllers at the university and the output in such a case looks like this:
Within this, there's e.g.:
respectively:
Alternatively one could use the "non-detailed" output as from:
Oh, the
ctrl
in the command seems to be equivalent tocontroller
.And instead of
all
one could useslot=0
as you already do in the script, which would yield:Hope that helps, Chris.