search

gligli / p600fw

Teensy++ based Sequential Circuits Prophet 600 firmware remake
http://gligli.github.io/p600fw/
41 stars 23 forks source link

No sound? #95

Open prioret opened 7 years ago

prioret commented 7 years ago

I have no sound.

And, when turn the knobs they go from 00 to 5.5 with no numbers in between with the slightest touch.

I just performed the upgrade, sent over the p600firmware_stable_2_0.syx and got an S. Then loaded the Prophet600OriginalFactoryPatches.syx

Any ideas?

prioret commented 7 years ago

I may have fixed it. I soldered yellow to F0 instead of where it belongs. I fixed that.

BUT

When im in preset mode and select a patch it comes up, but when I start tweaking the knobs, I dont see the knob value on the display. when I'm out of preset mode, I do see the knob values.

gligli commented 7 years ago

Hello, That seems normal about the knob values in preset mode. You can press "TO TAPE" to make preset mode behave temporarily like manual mode.

prioret commented 7 years ago

Thanks for your quick response and your software. So far so good!