Maybe values are not shown in correct format immediately after upgrade

[GoogleCodeExporter]

This is a very trivial issue, but reporting it, just in case it is symptomatic 
of something more important.

1) Install, run older MathDoku Revision e.g. 163
2) Turn off option "Maybes in 3x3 grid"
3) Enter maybe values "1234" in a cell - they are displayed in a line "1234"
4) Install newer MathDoku Revision e.g. 165
5) Open MathDoku and the maybe values are now shown in a 3x3 grid (as though 
you had the option turned on).
6) Press Menu->Options: just look to see that you definitely have the "Maybes 
in 3x3 grid" turned off
7) Press Back and now maybe values are shown correctly in a line.

Original issue reported on code.google.com by em...@srlee.com on 27 Mar 2013 at 6:29

[GoogleCodeExporter]

This problem also applies to options "Mark bad maths" and "Mark duplicates".

The problem can also reproduced as follows:
1) Turn off option "Maybes in 3x3 grid"
2) Enter maybe values "1234" in a cell - they are displayed in a line "1234"
3) Reset preferences via menu "Development Tools"
4) The maybe values are now shown in a 3x3 grid (as though you had the option 
turned on).
5) Press Menu->Options: just look to see that you definitely have the "Maybes 
in 3x3 grid" turned off
6) Press Back and now maybe values are shown correctly in a line.

Original comment by paul.din...@gmail.com on 28 Mar 2013 at 1:26

• Changed state: Accepted
• Added labels: Priority-Medium
• Removed labels: Priority-Low

[GoogleCodeExporter]

This issue was closed by revision r173.

Original comment by paul.din...@gmail.com on 28 Mar 2013 at 1:29

• Changed state: Fixed

[GoogleCodeExporter]

Tested Revision 198: Maybe values are now shown in correct format immediately 
after upgrade

Original comment by em...@srlee.com on 2 Apr 2013 at 9:17

• Changed state: Verified