kr15uk
commented
2 years ago Issue is now resolved, turns out to be web configurator issue Thanks jay_s_uk
boards.txt "lpc.board = Smoothieboard" was missing "lpc." prefix.
Ta
Closed kr15uk closed 2 years ago
kr15uk
commented
2 years ago Issue is now resolved, turns out to be web configurator issue Thanks jay_s_uk
boards.txt "lpc.board = Smoothieboard" was missing "lpc." prefix.
Ta
Ladies and gents,
Basically I have pulled out of storage both MKS Sbase 1.3 and original Smoothieboard and decided to flash with last supported Ethernet firmware variant 3.1.1_14
Unfortunately on both it fails to read thermistors, endstops etc aka reports -273.1 Flashed it with latest LPC WiFi variant and it's all good there.
To investigate I've tried couple of "inbetweeners" and narrowed it down to 3.2_1 not working and 3.2_4 working ok. Not sure what have happened there but something broke there.
On one of the beta variants I've got a bit more useful info, I guess debug was switched on, hope this could help, see below.
11:26:11.937 -> Loading LPC config from 0:/sys/board.txt... 11:26:11.937 -> 11:26:11.937 -> RepRapFirmware for LPC176x based Boards Version 3.2-beta1_2 dated 2020-09-15b1 11:26:11.937 -> Executing config.g...Error: in file macro line 12 column 7: M552: expected string expression 11:26:11.975 -> HTTP is enabled on port 80 11:26:11.975 -> FTP is disabled 11:26:11.975 -> TELNET is disabled 11:26:12.028 -> Error: Unknown pin name 'xmin' 11:26:12.028 -> Error: Unknown pin name 'ymin' 11:26:12.066 -> Error: Unknown pin name 'zmin' 11:26:12.066 -> Error: Unknown pin name 'th1' 11:26:12.066 -> Error: Unknown pin name 'bed' 11:26:12.066 -> Error: Heater 0 not found 11:26:12.066 -> Error: Heater 0 does not exist 11:26:12.066 -> Error: Heater 0 does not exist 11:26:12.086 -> Error: Unknown pin name 'th2' 11:26:12.086 -> Error: Unknown pin name 'e1' 11:26:12.086 -> Error: Heater 1 not found 11:26:12.086 -> Error: Heater 1 does not exist 11:26:12.086 -> Error: Unknown pin name 'th3' 11:26:12.086 -> Error: Unknown pin name 'e2' 11:26:12.124 -> Error: Heater 2 not found 11:26:12.124 -> Error: Heater 2 does not exist 11:26:12.124 -> Error: Unknown pin name 'fan' 11:26:12.124 -> Error: Fan number 0 not found 11:26:12.238 -> Done! 11:26:12.238 -> WiFi is disabled. 11:26:12.238 -> RepRapFirmware for LPC176x based Boards is up and running.
I do have a feeling that this was working prior hence I remember playing with these boards but I'm not sure how this could have got messed up - unless it's web configurator feeding wrong config now.
Ta
Kris