search

gloomyandy / RepRapFirmware

OO C++ RepRap Firmware
GNU General Public License v3.0
257 stars 61 forks source link

Pi3 duetcontrolserver install error #74

Closed wolfgangmauer closed 3 years ago

wolfgangmauer commented 3 years ago

I try a clean install with DuetPi-lite and get the error Executing ./RRF_LPC_3_2_RC_2.sh ...... Setting up duetwebcontrol (3.3-b2) ... Setting up duetsd (1.1.0) ... Setting up duetcontrolserver (3.3-b2) ... Installing new version of config file /opt/dsf/conf/config.json ... dpkg: error processing package duetcontrolserver (--configure): installed duetcontrolserver package post-installation script subprocess returned error exit status 1 dpkg: dependency problems prevent configuration of duetwebserver: duetwebserver depends on duetcontrolserver (>= 3.3-b2); however: Package duetcontrolserver is not configured yet.

dpkg: error processing package duetwebserver (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of reprapfirmware: reprapfirmware depends on duetcontrolserver (>= 1.2.0.0); however: Package duetcontrolserver is not configured yet.

dpkg: error processing package reprapfirmware (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of duetpluginservice: duetpluginservice depends on duetcontrolserver (= 3.3-b2); however: Package duetcontrolserver is not configured yet.

dpkg: error processing package duetpluginservice (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin (2.28-10+rpi1) ... Processing triggers for systemd (241-7~deb10u6+rpi1) ... Processing triggers for man-db (2.8.5-2) ... Processing triggers for dbus (1.12.20-0+deb10u1) ... Errors were encountered while processing: duetcontrolserver duetwebserver reprapfirmware duetpluginservice E: Sub-process /usr/bin/dpkg returned an error code (1)

jaysuk commented 3 years ago

If the updates fail with an error exit status 1, run the following and then rerun the script.

sudo mv /var/lib/dpkg/info/duet /tmp/ sudo mv /var/lib/dpkg/info/reprapfirmware. /tmp/ sudo apt-get update sudo dpkg --configure -a sudo apt-get install --reinstall duetcontrolserver

Thanks,

Jay

On Thu, 11 Mar 2021 at 01:40, Wolfgang Mauer @.***> wrote:

I try a clean install with DuetPi-lite and get the error Executing ./RRF_LPC_3_2_RC_2.sh ...... Setting up duetwebcontrol (3.3-b2) ... Setting up duetsd (1.1.0) ... Setting up duetcontrolserver (3.3-b2) ... Installing new version of config file /opt/dsf/conf/config.json ... dpkg: error processing package duetcontrolserver (--configure): installed duetcontrolserver package post-installation script subprocess returned error exit status 1 dpkg: dependency problems prevent configuration of duetwebserver: duetwebserver depends on duetcontrolserver (>= 3.3-b2); however: Package duetcontrolserver is not configured yet.

dpkg: error processing package duetwebserver (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of reprapfirmware: reprapfirmware depends on duetcontrolserver (>= 1.2.0.0); however: Package duetcontrolserver is not configured yet.

dpkg: error processing package reprapfirmware (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of duetpluginservice: duetpluginservice depends on duetcontrolserver (= 3.3-b2); however: Package duetcontrolserver is not configured yet.

dpkg: error processing package duetpluginservice (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin (2.28-10+rpi1) ... Processing triggers for systemd (241-7~deb10u6+rpi1) ... Processing triggers for man-db (2.8.5-2) ... Processing triggers for dbus (1.12.20-0+deb10u1) ... Errors were encountered while processing: duetcontrolserver duetwebserver reprapfirmware duetpluginservice E: Sub-process /usr/bin/dpkg returned an error code (1)

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/gloomyandy/RepRapFirmware/issues/74, or unsubscribe https://github.com/notifications/unsubscribe-auth/AATUSBVF6LXOWDZFLXDI6JTTDANQTANCNFSM4Y7IXMGA .

wolfgangmauer commented 3 years ago

Sorry, but didn't help

pi@duet3:~ $ sudo mv /var/lib/dpkg/info/duet /tmp/ pi@duet3:~ $ sudo mv /var/lib/dpkg/info/reprapfirmware. /tmp/ pi@duet3:~ $ sudo apt-get update Hit:1 http://archive.raspberrypi.org/debian buster InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:3 https://pkg.duet3d.com unstable InRelease Reading package lists... Done pi@duet3:~ $ sudo dpkg --configure -a Setting up duetcontrolserver (3.2.0) ... Setting up duettools (3.2.0) ... Setting up duetwebserver (3.2.0) ... Setting up reprapfirmware (3.2.0-1) ... Setting up duetsoftwareframework (3.2.0) ... Setting up duetwebcontrol (3.2.0) ... pi@duet3:~ $ sudo apt-get install --reinstall duetcontrolserver Reading package lists... Done Building dependency tree Reading state information... Done The following additional packages will be installed: duetruntime duetsoftwareframework duettools duetwebcontrol duetwebserver reprapfirmware Recommended packages: duetpluginservice The following packages will be upgraded: duetcontrolserver duetruntime duetsoftwareframework duettools duetwebcontrol duetwebserver reprapfirmware 7 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 33.0 MB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] Get:1 https://pkg.duet3d.com unstable/armv7 armhf duetsoftwareframework armhf 3.3-b2 [2,046 B] Get:2 https://pkg.duet3d.com unstable/armv7 armhf duettools armhf 3.3-b2 [55.0 kB] Get:3 https://pkg.duet3d.com unstable/armv7 armhf duetcontrolserver armhf 3.3-b2 [227 kB] Get:4 https://pkg.duet3d.com unstable/armv7 armhf duetruntime armhf 3.3-b2 [26.9 MB] Get:5 https://pkg.duet3d.com unstable/armv7 armhf duetwebserver armhf 3.3-b2 [80.2 kB] Get:6 https://pkg.duet3d.com unstable/armv7 armhf duetwebcontrol all 3.3-b2 [4,762 kB] Get:7 https://pkg.duet3d.com unstable/armv7 armhf reprapfirmware all 3.3-b2-1 [1,000 kB] Fetched 33.0 MB in 15s (2,188 kB/s) Reading changelogs... Done dpkg: warning: files list file for package 'duetruntime' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'duettools' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'duetwebserver' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'duetsoftwareframework' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'reprapfirmware' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'duetwebcontrol' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'duetsd' missing; assuming package has no files currently installed dpkg: warning: files list file for package 'duetcontrolserver' missing; assuming package has no files currently installed (Reading database ... 57971 files and directories currently installed.) Preparing to unpack .../0-duetsoftwareframework_3.3-b2_armhf.deb ... Unpacking duetsoftwareframework (3.3-b2) over (3.2.0) ... Preparing to unpack .../1-duettools_3.3-b2_armhf.deb ... Unpacking duettools (3.3-b2) over (3.2.0) ... Preparing to unpack .../2-duetcontrolserver_3.3-b2_armhf.deb ... Unpacking duetcontrolserver (3.3-b2) over (3.2.0) ... Preparing to unpack .../3-duetruntime_3.3-b2_armhf.deb ... Unpacking duetruntime (3.3-b2) over (3.2.0) ... Preparing to unpack .../4-duetwebserver_3.3-b2_armhf.deb ... Unpacking duetwebserver (3.3-b2) over (3.2.0) ... Preparing to unpack .../5-duetwebcontrol_3.3-b2_all.deb ... Unpacking duetwebcontrol (3.3-b2) over (3.2.0) ... Preparing to unpack .../6-reprapfirmware_3.3-b2-1_all.deb ... Unpacking reprapfirmware (3.3-b2-1) over (3.2.0-1) ... Setting up duetruntime (3.3-b2) ... Setting up duetcontrolserver (3.3-b2) ...

Configuration file '/opt/dsf/conf/config.json' ==> File on system created by you or by a script. ==> File also in package provided by package maintainer. What would you like to do about it ? Your options are: Y or I : install the package maintainer's version N or O : keep your currently-installed version D : show the differences between the versions Z : start a shell to examine the situation The default action is to keep your current version. *** config.json (Y/I/N/O/D/Z) [default=N] ? dpkg: error processing package duetcontrolserver (--configure): installed duetcontrolserver package post-installation script subprocess returned error exit status 1 dpkg: dependency problems prevent configuration of duettools: duettools depends on duetcontrolserver (= 3.3-b2); however: Package duetcontrolserver is not configured yet.

dpkg: error processing package duettools (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of duetwebserver: duetwebserver depends on duetcontrolserver (>= 3.3-b2); however: Package duetcontrolserver is not configured yet.

dpkg: error processing package duetwebserver (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of duetsoftwareframework: duetsoftwareframework depends on duetcontrolserver (= 3.3-b2); however: Package duetcontrolserver is not configured yet. duetsoftwareframework depends on duettools (= 3.3-b2); however: Package duettools is not configured yet. duetsoftwareframework depends on duetwebserver (= 3.3-b2); however: Package duetwebserver is not configured yet.

dpkg: error processing package duetsoftwareframework (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of reprapfirmware: reprapfirmware depends on duetsoftwareframework (>= 3.2.0); however: Package duetsoftwareframework is not configured yet. reprapfirmware depends on duetcontrolserver (>= 1.2.0.0); however: Package duetcontrolserver is not configured yet.

dpkg: error processing package reprapfirmware (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of duetwebcontrol: duetwebcontrol depends on duetsoftwareframework (>= 3.2.0); however: Package duetsoftwareframework is not configured yet.

dpkg: error processing package duetwebcontrol (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: duetcontrolserver duettools duetwebserver duetsoftwareframework reprapfirmware duetwebcontrol E: Sub-process /usr/bin/dpkg returned an error code (1) pi@duet3:~ $

wolfgangmauer commented 3 years ago

I think a have a broken lpcTfrReadyPin :-(