I am sorry for logging an issue; but it seems like I don't get the answer I am looking for. I am utilizing RRF on the Big Tree Tech E3 RRF - however; I don't understand the naming used vs. the physical lay out of pins.
Eg. If you have eg in config.g:
M574 X1 S1 P"xstop"
But on the pins PDF the x endstop is indicated as 'X_STOP'.
I have contacted BTT but seems they don't understand what I mean/want to do. I need to eg. reconfigure the filament runout sensor to behave as a Z-min end stop; but I don't know what name to use for this to indicate the correct pin to the firmware.
Hi,
I am sorry for logging an issue; but it seems like I don't get the answer I am looking for. I am utilizing RRF on the Big Tree Tech E3 RRF - however; I don't understand the naming used vs. the physical lay out of pins.
Eg. If you have eg in config.g:
M574 X1 S1 P"xstop"
But on the pins PDF the x endstop is indicated as 'X_STOP'.
I have contacted BTT but seems they don't understand what I mean/want to do. I need to eg. reconfigure the filament runout sensor to behave as a Z-min end stop; but I don't know what name to use for this to indicate the correct pin to the firmware.
eg. in the pin pdf it is given as: 'E0-STOP'
Reference: https://github.com/bigtreetech/BTT-E3-RRF/blob/master/BTT%20E3%20RRF%20V1.1/Hardware/BTT%20E3%20RRF%20V1.1-PIN.pdf
PLEASE help!
Tinus :)