Open GoogleCodeExporter opened 8 years ago
We have new RC firmware (V1.5.0 RC) for transmission. Please have a try.
Original comment by jht...@gmail.com
on 17 Nov 2010 at 10:36
Attachments:
Thx for response.
Ive upgraded firmware, evrithing seems well.
But it didnt not picked up immediately my usb hdd. It was mounted (under ssh)
but no disk under "Disk Status" after restart evrithing is ok. Did
"transmission install" and "transmission enable"
Original comment by bublik...@gmail.com
on 17 Nov 2010 at 2:20
We need to check your filesystem first.
Now we only support FAT/NTFS.
NTFS is more reliable.
root@Vigor2130:~# fdisk -l
Disk /dev/sda: 164.6 GB, 164696555520 bytes
255 heads, 63 sectors/track, 20023 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 5099 40957686 83 Linux
/dev/sda2 5100 10198 40957717+ 83 Linux
/dev/sda3 10199 15297 40957717+ 83 Linux
/dev/sda4 15298 20023 37961595 f Win95 Ext'd (LBA)
/dev/sda5 15298 15424 1020096 82 Linux swap
/dev/sda6 15425 20023 36941436 7 HPFS/NTFS
root@Vigor2130:~#
If no disk found in the table, attached your syslog. We can check it.
Original comment by jht...@gmail.com
on 17 Nov 2010 at 10:36
root@Vigor2130:~# fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 14593 117218241 c Win95 FAT32 (LBA)
Original comment by bublik...@gmail.com
on 17 Nov 2010 at 11:06
Original issue reported on code.google.com by
bublik...@gmail.com
on 28 Oct 2010 at 8:38