search

goalmarketing / vigor2130

Automatically exported from code.google.com/p/vigor2130
0 stars 0 forks source link

WDS VLAN #107

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
Sorry if this isn't the place to post this but I've not found another suitable 
forum and reading some of the issues already discussed shows some measure of 
expertise that I would kindly ask for assistance.

I've been very impressed with the Vigor products having previously owned a 
2880VG and now both a 2130n and AP 800.

The 2130 and AP are currently set up using WDS with no issues.
However, the AP is located in a rental unit, so I would like an SSID that is 
only available from the AP and all the physical ports of the AP to be able 
access each other and the internet over the WDS link to the 2130.
All the physical ports of the 2130 and the main SSID to be on a separate VLAN

2130:
   WAN: internet
   SSID: main
   Port 1-4: main
   WDS

AP:
   SSID: main [happy to drop this if it is easier to put the whole AP in a different VLAN]
   SSID: rental
   Port 1-4: rental
   WDS

I'm technically literate with enough experience on the command line but I have 
little experience with Linux networking.
I've dug around the 2130 (telnet), so I now where all the config files are but 
I'm not clear on what I would need to do create this 2 vlan setup across a WDS 
link.

I hope this make sense.
Cheers
   -Alun.

Original issue reported on code.google.com by a...@achampion.net on 16 Aug 2015 at 12:21