search

goalmarketing / vigor2130

Automatically exported from code.google.com/p/vigor2130
0 stars 0 forks source link

Time server doesn't work #49

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
What steps will reproduce the problem?
1. set up tim eserver for Netherlands Amsterdam
2. power of the router
3. power on the router

What is the expected output? What do you see instead?
i see 1 januari 1970

What version of the product are you using? On what operating system?
i use the Draytek Vigor 2130N en firmware 2130 1.5.2 RC1 Firmware
Even after an reset this problem exist

Please provide any additional information below.

Original issue reported on code.google.com by ele.b...@gmail.com on 13 Sep 2011 at 6:30

GoogleCodeExporter commented 8 years ago 
Do you have an Internet connection?
It needs an Internet connection to synchronize the system time again after a 
power off/on.

Original comment by vincent....@gmail.com on 14 Sep 2011 at 5:26

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
yes i have, when i set the time zone to another zone the time synch, and then i 
have to set the timezone back to the amsterdam

Original comment by ele.b...@gmail.com on 14 Sep 2011 at 6:55

GoogleCodeExporter commented 8 years ago 
'1 Jan 1970' means synchronization failed or not synchronize yet.
Maybe you can try to change the Update Interval to '3 min' or shorter.
And use a local NTP server as first one.
BTW, I can't duplicate this problem. My NTP server is pool.ntp.org.

Original comment by vincent....@gmail.com on 14 Sep 2011 at 8:17

GoogleCodeExporter commented 8 years ago 
Its strange, i use also pool.ntp.org en when i manually do synchronisation it 
does'nt work too. I will let you know when i try several things. Thanks.

Original comment by ele.b...@gmail.com on 14 Sep 2011 at 10:31

GoogleCodeExporter commented 8 years ago 
When setting the Automatically Update Interval to 3 minutes it works and set it 
now at 30minutes. Case can be closed.

Original comment by ele.b...@gmail.com on 15 Sep 2011 at 5:49

GoogleCodeExporter commented 8 years ago 
[deleted comment]
GoogleCodeExporter commented 8 years ago 
Playing with WAN settings router lose local DNS, clients are ok, time server, 
ping, trace and IPSec host name doesn't work, i have to use IP, some times 
router lost gateway i have to press OK in wan internet access to work. Factory 
reset solve the problem until i change some settings again(I have a 3G for 
backup, disable in this moment)

Original comment by raulmigu...@gmail.com on 16 Sep 2011 at 6:38

GoogleCodeExporter commented 8 years ago 
When done a firmware update you have to press ok button, then the timeserver 
synch then. Wehn you dont press the burtoon the timeserver will not sync 
firmware v1.5.2_RC1

Original comment by ele.b...@gmail.com on 23 Sep 2011 at 4:03