gokmonk sanguino issues

gokmonk / sanguino

Automatically exported from code.google.com/p/sanguino

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

sanguino.cc unavailable

#37 GoogleCodeExporter opened 8 years ago
1
NUM_DIGITAL_PINS in pins_arduino.h does not include analog pins

#36 GoogleCodeExporter opened 8 years ago
0
Patch for /sanguino/bootloaders/atmega644p/Makefile

#35 GoogleCodeExporter opened 8 years ago
0
Serial.begin(speed, config) failure

#34 GoogleCodeExporter opened 8 years ago
1
Atmega1284p, Sanguino-0023r4, arduino-0023 result in avrdude: stk500_getsync(): not in sync: resp=0x00

#33 GoogleCodeExporter opened 8 years ago
1
Enabled JTAG in hfuse is preventing the endstop detection for reprap with Marlin to work properly

#32 GoogleCodeExporter opened 8 years ago
2
Add pin change interrupt definitions (needed for SoftwareSerial).

#31 GoogleCodeExporter opened 8 years ago
2
Remove programmers.txt from the download.

#30 GoogleCodeExporter closed 8 years ago
2
Remove core from the distribution.

#29 GoogleCodeExporter opened 8 years ago
3
SoftSerial support

#28 GoogleCodeExporter opened 8 years ago
10
Compilation issues with Arduino IDE 1.01 during 'Verify' stage while using Sanguino-0101r1

#27 GoogleCodeExporter closed 8 years ago
6
lack of internal VREF support

#26 GoogleCodeExporter closed 8 years ago
2
Cannot install Sanguino to Arduino 1.1 IDE on a Mac

#25 GoogleCodeExporter closed 8 years ago
2
Support for OneWire 2.1

#24 GoogleCodeExporter closed 8 years ago
5
ATmega644p UARTS are dead !

#23 GoogleCodeExporter closed 8 years ago
2
ATmegaBOOT_644P.hex file missing

#22 GoogleCodeExporter closed 8 years ago
7
Add support for ATmega644 and ATmega644A

#21 GoogleCodeExporter opened 8 years ago
14
Arduino v1.0 compatibility

#20 GoogleCodeExporter closed 8 years ago
16
sdfatlib support on sanguino

#19 GoogleCodeExporter closed 8 years ago
2
Make Sanguino core libraries compatible with Arduino-021

#18 GoogleCodeExporter closed 8 years ago
9
Add support for the ATMega1284P in Sanguino

#17 GoogleCodeExporter closed 8 years ago
4
invalid device signature

#16 GoogleCodeExporter closed 8 years ago
2
NewSoftSerial10c fails to compile on Sanguino-0018r1_1_4

#15 GoogleCodeExporter closed 8 years ago
4
TWI does not twi_init() correctly in wire/utility/twi.c for atmega644[p]

#14 GoogleCodeExporter closed 8 years ago
2
bootloader size too big with gcc 4.4 and standard Makefile configuration

#13 GoogleCodeExporter closed 8 years ago
1
boards.txt has incorrect name for bootloader file

#12 GoogleCodeExporter closed 8 years ago
3
Serial.read() does not work with Arduino-0018

#11 GoogleCodeExporter closed 8 years ago
11
Bootloader does not load EEPROM properly

#10 GoogleCodeExporter closed 8 years ago
1
644P Pin Out Diagram is wrong

#9 GoogleCodeExporter closed 8 years ago
2
Wire lib not working on ATmega328 after Sanguino install

#8 GoogleCodeExporter closed 8 years ago
2
arduino 0016- Error building ethernet library

#7 GoogleCodeExporter closed 8 years ago
1
Document bootloader build process

#6 GoogleCodeExporter opened 8 years ago
0
SAnguino

#5 GoogleCodeExporter closed 8 years ago
1
SAnguino

#4 GoogleCodeExporter closed 8 years ago
1
SAnguino

#3 GoogleCodeExporter closed 8 years ago
1
Unify bootloaders for 644(p) and 324(p)

#2 GoogleCodeExporter closed 8 years ago
2
Timer0 interrupt bloated

#1 GoogleCodeExporter opened 8 years ago
1