Hello! I am unsure if this is a configuration error or a program error, but when I start the provider, it seems to hang on Testing runtime [vm]. I am running yagna 0.9.2 or 10.0.0-rc13 (tried both) in an Ubuntu 20.04 Server VM on Proxmox, Intel VT-x is enabled, and host cpu is used in the qemu config.
LSCPU output:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 46 bits physical, 48 bits virtual
CPU(s): 16
On-line CPU(s) list: 0-15
Thread(s) per core: 1
Core(s) per socket: 16
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 62
Model name: Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
Stepping: 4
CPU MHz: 2793.268
BogoMIPS: 5586.53
Virtualization: VT-x
Hypervisor vendor: KVM
Virtualization type: full
L1d cache: 512 KiB
L1i cache: 512 KiB
L2 cache: 64 MiB
L3 cache: 16 MiB
NUMA node0 CPU(s): 0-15
Vulnerability Itlb multihit: Not affected
Vulnerability L1tf: Mitigation; PTE Inversion; VMX flush not necessary, SMT disabled
Vulnerability Mds: Mitigation; Clear CPU buffers; SMT Host state unknown
Vulnerability Meltdown: Mitigation; PTI
Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl and seccomp
Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization
Vulnerability Spectre v2: Mitigation; Full generic retpoline, IBPB conditional, IBRS_FW, STIBP disabled, RSB filling
Vulnerability Srbds: Not affected
Vulnerability Tsx async abort: Not affected
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss ht syscall nx pdpe1gb rdtscp lm constant_tsc arc
h_perfmon rep_good nopl xtopology cpuid tsc_known_freq pni pclmulqdq vmx ssse3 cx16 pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsav
e avx f16c rdrand hypervisor lahf_lm cpuid_fault pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust smep erms xsaveop
t arat umip md_clear arch_capabilities
Hello! I am unsure if this is a configuration error or a program error, but when I start the provider, it seems to hang on
Testing runtime [vm]
. I am running yagna 0.9.2 or 10.0.0-rc13 (tried both) in an Ubuntu 20.04 Server VM on Proxmox, Intel VT-x is enabled, and host cpu is used in the qemu config. LSCPU output: