安装pipeline，流水线展示不完全

[zzk8s]

“流水线”按钮只在安装pipeline的团队有展示，其余团队没有相关按钮； 其他问题： 若登陆后先进入安装pipeline的团队，切换团队后会有“流水线”按钮，但无法使用，点击后界面一直转圈不响应，刷新web界面后，流水线按钮消失 若登陆后先进入其他团队，在切换到安装pipeline团队，pipeline团队也不展示流水线按钮，刷新web界面后才能使用流水线

[Issues-translate-bot]

Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑‍🤝‍🧑👫🧑🏿‍🤝‍🧑🏻👩🏾‍🤝‍👨🏿👬🏿

---

Title: to install the pipeline. The pipeline display is incomplete.

The "Pipeline" button is only displayed on the team that installed the pipeline, and other teams have no related buttons; other problems: If you first enter the team where pipeline is installed after logging in, there will be a "Pipeline" button after switching teams, but it cannot be used. After clicking, the interface keeps spinning in circles and does not respond. After refreshing the web interface, the Pipeline button disappears. If you first enter another team after logging in, and then switch to the installation pipeline team, the pipeline team will not display the pipeline button. Only after refreshing the web interface can you use the pipeline

[ZhangSetSail]

感谢反馈，这看起来确实存在一些问题，安排在 5.18 版本修复

[Issues-translate-bot]

Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑‍🤝‍🧑👫🧑🏿‍🤝‍🧑🏻👩🏾‍🤝‍👨🏿👬🏿

---

Thanks for the feedback, it seems that there are indeed some problems, which will be fixed in version 5.18.

[0478yhl]

“流水线”按钮只在安装管道的团队有展示，其余团队没有相关按钮； 其他问题： 若登陆后先进入安装管道的团队，切换团队后会有“流水线”按钮，但无法使用，点击后界面一直转圈不响应，刷新web界面后，流水线按钮消失 若登陆后先进入其他团队，在切换到安装管道团队，管道团队也不展示流水线按钮，刷新web界面后才能使用流水线

经过我们测试，您所提及的问题并没有复现。您可以尝试以下思路排查下

1. 检测Pipeline所配置的URL是否可以正常访问
2. 服务组件是否正常启动

3.详细参考以下两篇文档步骤是否有遗漏 GitLab CI 使用 Pipeline 安装

[Issues-translate-bot]

Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑‍🤝‍🧑👫🧑🏿‍🤝‍🧑🏻👩🏾‍🤝‍👨🏿👬🏿

---

The "Assembly Line" button is only displayed in the team that installs pipelines, and other teams do not have related buttons; Other issues: If you first enter the team that installs pipelines after logging in, there will be an "Assembly Line" button after switching teams, but it cannot be used, and the interface after clicking It keeps spinning in circles and does not respond. After refreshing the web interface, the pipeline button disappears. If you log in and enter another team first, then switch to the installation pipeline team, the pipeline team will not display the pipeline button. You can use the pipeline only after refreshing the web interface.

After our testing, the problem you mentioned has not been reproduced. You can try the following ideas to troubleshoot

1. Check whether the URL configured in the Pipeline can be accessed normally

2. Whether the service component starts normally

   

3. Refer to the following two documents in detail to see if there are any missing steps. GitLab CI usage Pipeline installation

[zzk8s]

“流水线”按钮只在安装管道的团队有展示，其余团队没有相关按钮； 其他问题： 若登陆后先进入安装管道的团队，切换团队后会有“流水线”按钮，但无法使用，点击后界面一直转圈不响应，刷新web界面后，流水线按钮消失 若登陆后先进入其他团队，在切换到安装管道团队，管道团队也不展示流水线按钮，刷新web界面后才能使用流水线

经过我们测试，您所提及的问题并没有复现。您可以尝试以下思路排查下

1. 检测Pipeline所配置的URL是否可以正常访问
2. 服务组件是否正常启动

3.详细参考以下两篇文档步骤是否有遗漏 GitLab CI 使用 Pipeline 安装

组件均正常运行，但是pipeline的对外访问地址访问会提示401，没有权限，需要在哪做下配置吗 同时，在现有的流水线创建应用服务时，如果git仓库地址填https的域名，测试连通会提示账号密码错误，若使用IP地址，则会提示没有仓库权限

[ZhangSetSail]

将pipeline对外暴露的端口协议改成 tcp 试试

[Issues-translate-bot]

Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑‍🤝‍🧑👫🧑🏿‍🤝‍🧑🏻👩🏾‍🤝‍👨🏿👬🏿

---

Try changing the pipeline's externally exposed port protocol to tcp.

[Issues-translate-bot]

Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑‍🤝‍🧑👫🧑🏿‍🤝‍🧑🏻👩🏾‍🤝‍👨🏿👬🏿

---

Try changing the pipeline's externally exposed port protocol to tcp.

[ZhangSetSail]

该问题长时间没有更新，我先关闭该issue，有问题你可以随时重新打开

[Issues-translate-bot]

Bot detected the issue body's language is not English, translate it automatically. 👯👭🏻🧑‍🤝‍🧑👫🧑🏿‍🤝‍🧑🏻👩🏾‍🤝‍👨🏿👬🏿

---

This issue has not been updated for a long time. I will close the issue first. If you have any questions, you can reopen it at any time.