search

goodtft / LCD-show

2.4" 2.8"3.2" 3.5" 5.0" 7.0" TFT LCD driver for the Raspberry PI 3B+/A/A+/B/B+/PI2/ PI3/ZERO/ZERO W
2.31k stars 793 forks source link

Touchscreen not working #261

Open isnotinvain opened 3 years ago

isnotinvain commented 3 years ago

Display works fine, but touch screen not working. Followed the provided instructions. Using a raspberry pi 3, 5 inch screen, plugged in via usb not via GPIO.

Any ideas for troubleshooting?

Thanks

levelKro commented 3 years ago

In my case, I use the MHS35-show to install my 3.5inch with Touchscreen SPI and display work, but not the Touchscreen. It's look like a problem with drivers and latest Raspbian update. You can try an older version (begin of 2020 of before), it's my solution for running display with Retropie.

isnotinvain commented 3 years ago

Thanks

isnotinvain commented 3 years ago

@goodtft will you be releasing an update that supports newer versions of Raspbian?

Electronlibre2012 commented 3 years ago

hello all,

so bad @goodtft doesnt give anymore response...

same boat, screen works but not the touch screen...

not good

sngrl commented 2 years ago

The same problem with Raspberry Pi 3B (latest clean release of the Raspberry Pi OS) + MHS-3.5: display is working but touchscreen is not

felipebraz commented 2 years ago

Same problem here via GPIO

frozenfoxx commented 2 years ago

Same problem here with LCD35 and GPIO.

luisdavid0202 commented 8 months ago

Same problem here! Any workaround? LCD display image but the touch screen doesn't work. MHS-3.5” RPi Display-B(MHS35XX) RPi 3b+ bullseye

kaosbeat commented 2 months ago

same here on RPi5, boots fine, touch works for 5 seconds and then stops...