search

google-code-export / openeve

Automatically exported from code.google.com/p/openeve
0 stars 1 forks source link

cannot make calls, just recieve #40

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1. Dial number
2. Press call
3. Calling freezes

What is the expected output? What do you see instead?
Make calls

What version of the product are you using?

On what operating system?

Gingerbread
Do you have logcat or dmesg ?
 (adb shell logcat > logcat.txt ^C, adb shell dmesg > dmesg.txt)

What version of the *Official LG* Firmware were before using Custom
firmware ?
(V20G, V20D, V15x, V16x etc. )
V20g

Please provide any additional information below.

I cannot make calls with sim card from vodafone spain. I used different sim 
card from the same carrier,same output. I used another sim card from another 
spanish carrier and its working fine. Pls help

Original issue reported on code.google.com by mikesocc...@gmail.com on 18 Apr 2011 at 10:36

GoogleCodeExporter commented 9 years ago 
Similar problem.  I have three sim cards.  two pay as you go GSM only, one 
HSDPA (which should allow for fallback on GSM but doesn't).  GSM provider 
simcards allow me to call out fine.  HSDPA (WCDMA) does not allow me to call 
out.  I immediately get a "Call Ended" screen from the phone.  However, 
incoming calls work and show call display.    Outgoing SMS messages work fine 
and incoming work fine as well.  HSDPA data works as well.  Phone seems to have 
trouble reading some info off the SIM card.  is not able to use GSM as fallback 
(switches immediately into airplane mode if it cannot connect to 3G).  MTS SIM 
card size uses a 16:9 aspect ratio for the gold part, Rogers sim card is closer 
to 4:3, to use screen size parlance.  Don't know if that is significant in any 
way but thought I'd mention it.  in about phone - status, my phone number does 
not show up automagically.  went to add it into all settings under additional 
settings.  get sim card error on that screen, but does allow me to add in my 
phone number manually which subsequently does show up in the settings menu (not 
that it helps me do calls out)

2.6.32.9-OpenEVE-v1.1-SVN 
wpark@openeve #2

I do believe I had V20G flashed previously as well but I'm not sure.

Original comment by ReedSolo...@gmail.com on 19 Apr 2011 at 2:47

GoogleCodeExporter commented 9 years ago 
Same problem but outgoing sms doesn't work for me (operator :SFR (france) )

Original comment by benten...@gmail.com on 20 Apr 2011 at 10:22

GoogleCodeExporter commented 9 years ago 
I got a similar problem. When i try call, after dial and press call, the call 
freezes, and if i try to cancel the call, the call notification stays in the 
bar, and the only way to clear is restarting the phone.

My phone is a GW620

Im using a 850mhz operator, and my base firmware is the v10h version.

i will apreciate all the help u can give me, cause im so excited with the 
project, and if i can help u too on something count on me.

Original comment by nightcra...@gmail.com on 23 Apr 2011 at 12:15

GoogleCodeExporter commented 9 years ago 
Im in spain on vodafone network...and i have a 64k sim card...it seems at the 
momment gingerbread doest work with 64k and 128k simcards...mine it works to 
make calls with a 32k sim card

Original comment by mikesocc...@gmail.com on 23 Apr 2011 at 1:52

GoogleCodeExporter commented 9 years ago 
Similar problem in Brazil. Im using a GW620, my firmware is the v10h.

When i try call, after dial and press call, the call freezes, and if i try to 
cancel the call, the call notification stays in the bar, and the only way to 
clear is restarting the phone (2)

Help me please =)

Original comment by sauloip...@uol.com.br on 28 Apr 2011 at 5:10

GoogleCodeExporter commented 9 years ago 
an i have a 128k sim card.

Original comment by sauloip...@uol.com.br on 28 Apr 2011 at 5:11

GoogleCodeExporter commented 9 years ago 
Do not know if it applies wkp support the 128k sim card.
Let's hope so.

And e tested the system-gb-110430-snapshot but still no calls.

Original comment by DavidGF....@gmail.com on 3 May 2011 at 4:53

GoogleCodeExporter commented 9 years ago 
No word on this? I have this same issue here in Panama :(

Original comment by perez.ma...@gmail.com on 5 May 2011 at 2:49

GoogleCodeExporter commented 9 years ago

Original comment by wkp...@gmail.com on 6 May 2011 at 10:38

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
I too feel the same. I'm from Venezuela, Operator: Movilnet, Firmware: v10h - 
850 Mhz band.

I use the system-gb-20110506 with the boot-gb234-110429-snapshot-224MB with 
GAPPS-gb-20110307-signed.

Original comment by DavidGF....@gmail.com on 11 May 2011 at 5:33

Attachments:

GoogleCodeExporter commented 9 years ago 
I am using the latest version of the boot and system to update.
And the problem persists.

Original comment by DavidGF....@gmail.com on 11 May 2011 at 5:39

GoogleCodeExporter commented 9 years ago 
Come Here http://code.google.com/p/openeve/issues/detail?id=6

With this patch worked for calls

Original comment by DavidGF....@gmail.com on 11 May 2011 at 1:31

GoogleCodeExporter commented 9 years ago 
I can confirm that I was having this issue but with the release 
system-gb-20110514a-snapshot, it got resolved.

Original comment by perez.ma...@gmail.com on 17 May 2011 at 9:21

GoogleCodeExporter commented 9 years ago

Original comment by wkp...@gmail.com on 17 May 2011 at 9:25

GoogleCodeExporter commented 9 years ago

Original comment by wkp...@gmail.com on 21 May 2011 at 5:39