search

google-code-export / sapphire-port-dream

Automatically exported from code.google.com/p/sapphire-port-dream
1 stars 1 forks source link

A2DP breaks call audio and no audio controls while connected via A2DP #29

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1. Connect via A2DP
2. Make a call (no audio)
3. Try to skip/repeat, nothing happens via remote control of audio

What is the expected output? What do you see instead?
For calls to have audio and music to skip/repeat when the button is pressed on 
remote 
device

What version of the product are you using? On what operating system?
5.0.1 (no apps to sd)

Please provide any additional information below.
I have not tried the old "fix" since i cant seem to oen a zip on the device

Original issue reported on code.google.com by phatma...@gmail.com on 11 Apr 2009 at 11:57

GoogleCodeExporter commented 9 years ago 
Looks like this is same as
http://code.google.com/p/sapphire-port-dream/issues/detail?id=27. So that's a
confirmation.

Original comment by b.chappell42@gmail.com on 11 Apr 2009 at 12:00

GoogleCodeExporter commented 9 years ago 
I have applied the fix for the 4.5 image. If I disconnect the BT headset while 
in a 
call, the audio is there and 2 way. As soon as i reconnect the BT headset, i 
loose 
all call audio. Also the skip/repeat controls for audio seem to work.

I tested this on a diffenet BT device (Motorola S805 streo headset as oppoised 
to 
the Sont BT5000 headunit in my car. Will retest with my car as soon as i leave 
for 
work this evening.)

Original comment by phatma...@gmail.com on 11 Apr 2009 at 1:54

GoogleCodeExporter commented 9 years ago 
I tested just now with A2DP headphones, seems to work just fine.

Can someone else verify?

Original comment by hayk...@gmail.com on 11 Apr 2009 at 7:47

GoogleCodeExporter commented 9 years ago 
I don't own any a2dp. Though this was a problem with 4.5 also. Can you confirm 
that?
Could be headphone specific. Hard to track down none the less.

Original comment by b.chappell42@gmail.com on 11 Apr 2009 at 7:51

GoogleCodeExporter commented 9 years ago 
Same problem here. After placing a call, I loose audioo and have to disconnect 
my stereo bt 
headset.  Tried unpairing and repairing with no luck . Any ideas?

Original comment by mikef1...@gmail.com on 11 Apr 2009 at 10:07

GoogleCodeExporter commented 9 years ago 
I can verify this. Connected BT-Headset (Sony Ericsson HBH-DS970), made a call 
and
hung up, started to listening to music and tried to skip or pause (without 
success).

Disconnected BT-Headset, suddenly after about 15 seconds the music player 
started to
play music randomly(?) skipping to the next tracks.

[Version 5.0G]

Original comment by Mister...@gmail.com on 11 Apr 2009 at 10:09

GoogleCodeExporter commented 9 years ago 
i have the same a2dp  (Sony Ericsson HBH-DS970) it work just fine in the past 3 
hrs 
music pause when incoming call then music just resume when call end. I also 
running 
5.0G

Original comment by nguyenkh...@gmail.com on 11 Apr 2009 at 10:30

GoogleCodeExporter commented 9 years ago 
I can use a2dp with my car headunit Pioneer AVIC-D3.  Pause, FF, RR worked.  I 
can't
use the headset function with this unit (via CD-BTB2000) and with Moto H560. 
When I
make a call, I hear a beep from my headset, but no audio.  The audio can be 
heard
from the phone.  I tried this with both 5.0.1H & 5.0G w/out SD.

Original comment by trim...@gmail.com on 11 Apr 2009 at 11:00

GoogleCodeExporter commented 9 years ago 
trimdao update your radio that may help

Original comment by nguyenkh...@gmail.com on 12 Apr 2009 at 2:10

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
UPDATE:
     I have tested this with the R33 radio update and the Saphire Radio update
Saphire:
  No BT connection: Calls process normally.
  BT connected: No audio in call. If BT if disconnected during call, no change. 
  After call: phone must be reset to restore call audio.
  A2DP: Controls for audio seem to work 100%

R33:
  No BT: Everything good
  BT connected: No call audio, but if you disconnect BT via menu on screen in call, 
audio is good both ways. Reconnect BT, no audio.
  After call: Call process normally if BT disocnnected.
  A2DP: Not retested (technical difficulties) See comment 2 for results.

This was done on an existing install (no wipe) and with the "fix" from 4.5 for 
camera also applied (when the radio was R33. Would it still be applied after i 
updated to the saphire radio?)

Original comment by phatma...@gmail.com on 12 Apr 2009 at 4:51

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
I've tried this and confirmed it with a Jabra BT250v and an original-style 
Jawbone 
mono earpiece.

Original comment by jeffcost...@gmail.com on 12 Apr 2009 at 5:13

GoogleCodeExporter commented 9 years ago 
I can confirm the issue as well using a HBH-DS970.

Original comment by mikef1...@gmail.com on 12 Apr 2009 at 5:38

GoogleCodeExporter commented 9 years ago 
Issue is kernel based, will be resolved as soon as a good kernel comes out and 
either 
i or daproy compiles it.

Original comment by hayk...@gmail.com on 12 Apr 2009 at 6:16

GoogleCodeExporter commented 9 years ago 
I have this issue with the H build but not the G build.

Original comment by brock.t...@gmail.com on 16 Apr 2009 at 9:11

GoogleCodeExporter commented 9 years ago 
Scratch comment 16 -- it seems to be intermittent on H, so perhaps it was an 
issue on
the G build after all.

Original comment by brock.t...@gmail.com on 16 Apr 2009 at 9:14

GoogleCodeExporter commented 9 years ago 
Hi can some one developer help me plase i install the magic but i can not use 
bluetoot!!! My email is . 
Guanaco1488@gmail.com

Original comment by guanaco1...@gmail.com on 20 Apr 2009 at 5:54

GoogleCodeExporter commented 9 years ago 
5.0.2Hr3

I tried on my car which haves a bluetooth reciever in two modes:  a2dp 
mode(audio stereo) and headset 
mode(audio mono+mic).

I can't  ear the incoming calls when connected to a2dp, it doesn't switch to 
headset mode.
I can't switch back to phone the audio source.
I always have to reboot the phone.

Original comment by pee...@gmail.com on 21 Apr 2009 at 5:16

GoogleCodeExporter commented 9 years ago 
this issue still remains in r4

Original comment by pee...@gmail.com on 24 Apr 2009 at 10:27

GoogleCodeExporter commented 9 years ago 
i have the problem with the motorola ht-820, the music works great, but if i 
try to 
make a call or receive a call with the bluetooth i dont hear anything neither 
the 
caller, after that if i try to make a call i dont hear anything i have to 
reboot the 
phone to get the sound in a call to work again :(

Original comment by ping...@gmail.com on 26 Apr 2009 at 2:02

GoogleCodeExporter commented 9 years ago 
this issue still remains in r5 !! :(

Original comment by pee...@gmail.com on 26 Apr 2009 at 8:29

GoogleCodeExporter commented 9 years ago 
Confirmed 5.02G, using Tmobile G1 and i.Tech Clip S35.  I originally installed 
5.02H-
a2sd, media audio worked fine, but I couldn't get call audio.  Also tried 5.02G-
a2sd, 5.02H and 5.02G, same symptoms.  I could not install the radio update.  
Finally got SPL update and Radio update installed.  A2DP Media Audio and Phone 
Audio 
is now working perfectly.

Original comment by clewis...@gmail.com on 27 Apr 2009 at 3:55