全局代理能用，但是gfw-list模式不能用

[GoogleCodeExporter]

全局代理能够正常访问facebook,但是gfw-list一直出错。就是这两
天出的错，以前都是好好的。我用的是6.11的版本。chrome,
一下是错误提示。我的dns用的是google的两个。 8.8.8.8 8.8.4.4
火狐下用goagent+autoproxy访问facebook正常

This webpage is not available
The server at www.facebook.com can't be found, because the DNS lookup failed. 
DNS is the web service that translates a website's name to its Internet 
address. This error is most often caused by having no connection to the 
Internet or a misconfigured network. It can also be caused by an unresponsive 
DNS server or a firewall preventing Google Chrome from accessing the network.
Here are some suggestions:
Reload this webpage later.
Check your Internet connection. Restart any router, modem, or other network 
devices you may be using.
Check your DNS settings. Contact your network administrator if you're not sure 
what this means.
Try disabling network prediction by following these steps: Go to the wrench 
menu > Options > Under the Hood and deselect "Predict network actions to 
improve page load performance." If this does not resolve the issue, we 
recommend selecting this option again for improved performance.
Add Google Chrome as a permitted program in your firewall's or antivirus 
software's settings. If it is already a permitted program, try deleting it from 
the list of permitted programs and adding it again.
If you use a proxy server, check your proxy settings or contact your network 
administrator to make sure the proxy server is working. If you don't believe 
you should be using a proxy server, adjust your proxy settings: Go to the 
wrench menu > Options > Under the Hood > Change proxy settings... > LAN 
Settings and deselect the "Use a proxy server for your LAN" checkbox.

Original issue reported on code.google.com by longsha...@gmail.com on 18 Jun 2011 at 1:33

[GoogleCodeExporter]

自带gfwlist只是多提供一种选择，其他的怎么设置wp也能够用��
�同的方法设置

Original comment by dtma...@163.com on 19 Jun 2011 at 3:24

• Changed state: WontFix

[GoogleCodeExporter]

我靠,我也是你这个问题,我还说是火狐的问题,重安装,搞了半�
��了,我靠,原来是wp的问题

Original comment by liulang...@gmail.com on 20 Jun 2011 at 10:30

[GoogleCodeExporter]

在火狐网络设置里面使用自动代理设置，自己写个pac文件，��
�简单啊，或者把 gfw-list  的pac文件下载下来 
用base64转码后就可以自己编辑了

Original comment by ving...@gmail.com on 21 Jun 2011 at 1:46

[GoogleCodeExporter]

不用这么复杂啊，在FF里面选择使用系统代理就行了，我一直
是这么用的，这个比直接设PAC文件多一个好处就是可以用WALLP
ROXY.EXE来切换不同的代理

Original comment by bibup...@gmail.com on 21 Jun 2011 at 3:48

[GoogleCodeExporter]

我找到了问题的所在就是,用程序自带的 gfw-list  
的pac文件是不行的,我也不知道为什么不行
我下载了一个 gfw-list  
的pac文件也没有转码编辑,就在wp里面从建立一个新的代理,就�
��定了
我也不知道是什么原因就好了
但是现在,,问题出来了,,,谷歌的网页快照就算全局代理都看不
了
还有,谷歌的很多服务搜索要跳转到hk
除非在FF里面把语言改成en

Original comment by liulang...@gmail.com on 21 Jun 2011 at 4:39