Open Pavel-Demidyuk opened 10 months ago
Hi,
root@DietPi:~# ls /dev/apex_0 ls: cannot access '/dev/apex_0': No such file or directory
I found similar issues already discussed, like here, but disabling "Secure Boot" doesn't help in my case.
dmesg:
[ 0.000000] microcode: microcode updated early to revision 0x17, date = 2022-07-15 [ 0.000000] Linux version 6.1.0-0.deb11.6-amd64 (debian-kernel@lists.debian.org) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT_DYNAMIC Debian 6.1.15-1~bpo11+1 (2023-03-16) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-0.deb11.6-amd64 root=UUID=bd1d8c7e-f19e-4a33-b2ee-02139a42f8a6 ro net.ifnames=0 systemd.unified_cgroup_hierarchy=false consoleblank=0 [ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'compacted' format. [ 0.000000] signal: max sigframe size: 1520 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007626bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007626c000-0x00000000784d5fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000784d6000-0x000000007853efff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007853f000-0x00000000785c6fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000785c7000-0x0000000078bbbfff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000078bbc000-0x0000000078c4efff] type 20 [ 0.000000] BIOS-e820: [mem 0x0000000078c4f000-0x0000000078c4ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000078c50000-0x000000007fbfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000002803fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: ACPI=0x78560000 ACPI 2.0=0x78560014 TPMFinalLog=0x78574000 SMBIOS=0x78a3a000 SMBIOS 3.0=0x78 a39000 MEMATTR=0x72e1e018 ESRT=0x72e22a98 MOKvar=0x78a14000 [ 0.000000] secureboot: Secure boot disabled [ 0.000000] SMBIOS 3.3.0 present. [ 0.000000] DMI: Intel Default string/YC-J6412, BIOS 5.19 03/05/2023 [ 0.000000] tsc: Detected 2000.000 MHz processor [ 0.000000] tsc: Detected 1996.800 MHz TSC [ 0.000426] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000430] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000450] last_pfn = 0x280400 max_arch_pfn = 0x400000000 [ 0.000530] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000776] last_pfn = 0x78c50 max_arch_pfn = 0x400000000 [ 0.020545] esrt: Reserving ESRT space from 0x0000000072e22a98 to 0x0000000072e22c38. [ 0.020552] e820: update [mem 0x72e22000-0x72e22fff] usable ==> reserved [ 0.021179] RAMDISK: [mem 0x31af5000-0x34d71fff] [ 0.029138] TSC deadline timer available [ 0.029139] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.029166] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.029169] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.029172] PM: hibernation: Registered nosave memory: [mem 0x72e22000-0x72e22fff] [ 0.029174] PM: hibernation: Registered nosave memory: [mem 0x7626c000-0x784d5fff] [ 0.029175] PM: hibernation: Registered nosave memory: [mem 0x784d6000-0x7853efff] [ 0.029176] PM: hibernation: Registered nosave memory: [mem 0x7853f000-0x785c6fff] [ 0.029177] PM: hibernation: Registered nosave memory: [mem 0x785c7000-0x78bbbfff] [ 0.029178] PM: hibernation: Registered nosave memory: [mem 0x78bbc000-0x78c4efff] [ 0.029181] PM: hibernation: Registered nosave memory: [mem 0x78c50000-0x7fbfffff] [ 0.029182] PM: hibernation: Registered nosave memory: [mem 0x7fc00000-0xbfffffff] [ 0.029183] PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xcfffffff] [ 0.029184] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfdffffff] [ 0.029185] PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.029186] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.029187] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.029188] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.029189] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.029190] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed1ffff] [ 0.029191] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] [ 0.029192] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfedfffff] [ 0.029193] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.029194] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.029194] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.029197] [mem 0x7fc00000-0xbfffffff] available for PCI devices [ 0.029199] Booting paravirtualized kernel on bare hardware [ 0.029203] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.036351] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036815] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036826] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036830] pcpu-alloc: [0] 0 1 2 3 [ 0.036873] Fallback order for Node 0: 0 [ 0.036879] Built 1 zonelists, mobility grouping on. Total pages: 2025427 [ 0.036880] Policy zone: Normal [ 0.036882] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-0.deb11.6-amd64 root=UUID=bd1d8c7e-f19e-4a33-b2ee-02139a42f8a6 ro net.ifnames=0 systemd.unified_cgroup_hierarchy=false consoleblank=0 [ 0.036961] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.1.0-0.deb11.6-amd64", will be passed to user space. [ 0.037003] random: crng init done [ 0.038332] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.039007] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.039063] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.039077] software IO TLB: area num 4. [ 0.076530] Memory: 1848044K/8230956K available (14342K kernel code, 2323K rwdata, 8384K rodata, 2768K init, 5124K bss, 406616K reserved, 0K cma-reserved) [ 0.076707] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.076727] ftrace: allocating 40078 entries in 157 pages [ 0.084774] ftrace: allocated 157 pages with 5 groups [ 0.085647] Dynamic Preempt: voluntary [ 0.085688] rcu: Preemptible hierarchical RCU implementation. [ 0.085689] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.085691] Trampoline variant of Tasks RCU enabled. [ 0.085691] Rude variant of Tasks RCU enabled. [ 0.085692] Tracing variant of Tasks RCU enabled. [ 0.085693] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.085694] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.091424] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 [ 0.091735] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.091964] Console: colour dummy device 80x25 [ 0.092355] printk: console [tty0] enabled [ 0.092379] ACPI: Core revision 20220331 [ 0.092840] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns [ 0.092991] APIC: Switch to symmetric I/O mode setup [ 0.092996] DMAR: Host address width 39 [ 0.093000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.093012] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 49e2ff0505e [ 0.093018] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.093028] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.093034] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fbfffff [ 0.093039] DMAR: ANDD device: 3 name: \_SB.PC00.DMA0 [ 0.093042] DMAR: ANDD device: 4 name: \_SB.PC00.DMA1 [ 0.093046] DMAR: ANDD device: 5 name: \_SB.PC00.DMA2 [ 0.093050] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.093054] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.093058] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.093059] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.095203] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.095211] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.100450] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.116933] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns [ 0.116947] Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.60 BogoMIPS (lpj=7987200) [ 0.116954] pid_max: default: 32768 minimum: 301 [ 0.122885] LSM: Security Framework initializing [ 0.122912] landlock: Up and running. [ 0.122915] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.122961] AppArmor: AppArmor initialized [ 0.122967] TOMOYO Linux initialized [ 0.122976] LSM support for eBPF active [ 0.123026] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.123052] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.123388] CPU0: Thermal monitoring enabled (TM1) [ 0.123393] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.123447] process: using mwait in idle threads [ 0.123452] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.123455] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.123462] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.123468] Spectre V2 : Mitigation: Enhanced IBRS [ 0.123471] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.123477] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.123482] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.123489] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.123493] SRBDS: Vulnerable: No microcode [ 0.144758] Freeing SMP alternatives memory: 36K [ 0.145084] smpboot: CPU0: Intel(R) Celeron(R) J6412 @ 2.00GHz (family: 0x6, model: 0x96, stepping: 0x1) [ 0.145289] cblist_init_generic: Setting adjustable number of callback queues. [ 0.145296] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.145328] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.145352] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.145379] Performance Events: PEBS fmt4+-baseline, PEBS-via-PT, AnyThread deprecated, Tremont events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.145431] ... version: 5 [ 0.145437] ... bit width: 48 [ 0.145440] ... generic registers: 4 [ 0.145442] ... value mask: 0000ffffffffffff [ 0.145446] ... max period: 00007fffffffffff [ 0.145448] ... fixed-purpose events: 3 [ 0.145451] ... event mask: 000000070000000f [ 0.145607] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 0.145640] rcu: Hierarchical SRCU implementation. [ 0.145644] rcu: Max phase no-delay instances is 1000. [ 0.146407] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.146502] smp: Bringing up secondary CPUs ... [ 0.146649] x86: Booting SMP configuration: [ 0.146653] .... node #0, CPUs: #1 #2 #3 [ 0.154722] smp: Brought up 1 node, 4 CPUs [ 0.154722] smpboot: Max logical packages: 1 [ 0.154722] smpboot: Total of 4 processors activated (15974.40 BogoMIPS) [ 0.174087] node 0 deferred pages initialised in 20ms [ 0.174087] devtmpfs: initialized [ 0.174087] x86/mm: Memory block size: 128MB [ 0.174087] ACPI: PM: Registering ACPI NVS region [mem 0x7853f000-0x785c6fff] (557056 bytes) [ 0.174087] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.174087] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.174087] pinctrl core: initialized pinctrl subsystem [ 0.177886] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.178188] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.178370] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.178583] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.178608] audit: initializing netlink subsys (disabled) [ 0.178632] audit: type=2000 audit(1700514067.084:1): state=initialized audit_enabled=0 res=1 [ 0.178632] thermal_sys: Registered thermal governor 'fair_share' [ 0.178632] thermal_sys: Registered thermal governor 'bang_bang' [ 0.178632] thermal_sys: Registered thermal governor 'step_wise' [ 0.178632] thermal_sys: Registered thermal governor 'user_space' [ 0.178632] thermal_sys: Registered thermal governor 'power_allocator' [ 0.178632] cpuidle: using governor ladder [ 0.178632] cpuidle: using governor menu [ 0.178632] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.178632] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.178632] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) [ 0.178632] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820 [ 0.178632] PCI: Using configuration type 1 for base access [ 0.178632] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.178632] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.187080] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.187080] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.187080] ACPI: Added _OSI(Module Device) [ 0.187080] ACPI: Added _OSI(Processor Device) [ 0.187080] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.187080] ACPI: Added _OSI(Processor Aggregator Device) [ 0.260204] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 0.269778] ACPI: Dynamic OEM Table Load: [ 0.269794] ACPI: SSDT 0xFFFF9164C0E17000 000101 (v02 PmRef Cpu0Psd 00003000 INTL 20191213) [ 0.270988] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked [ 0.272847] ACPI: Dynamic OEM Table Load: [ 0.272858] ACPI: SSDT 0xFFFF9164C0E91800 0003B7 (v02 PmRef Cpu0Cst 00003001 INTL 20191213) [ 0.274164] ACPI: Dynamic OEM Table Load: [ 0.274174] ACPI: SSDT 0xFFFF9164C0CF0800 000437 (v02 PmRef Cpu0Ist 00003000 INTL 20191213) [ 0.275897] ACPI: Dynamic OEM Table Load: [ 0.275908] ACPI: SSDT 0xFFFF9164C0DA0000 0008E7 (v02 PmRef ApIst 00003000 INTL 20191213) [ 0.277416] ACPI: Dynamic OEM Table Load: [ 0.277427] ACPI: SSDT 0xFFFF9164C0FCB000 000492 (v02 PmRef ApHwp 00003000 INTL 20191213) [ 0.278804] ACPI: Dynamic OEM Table Load: [ 0.278813] ACPI: SSDT 0xFFFF9164C0FCA000 0004D2 (v02 PmRef ApPsd 00003000 INTL 20191213) [ 0.280191] ACPI: Dynamic OEM Table Load: [ 0.280200] ACPI: SSDT 0xFFFF9164C0FCD800 00048A (v02 PmRef ApCst 00003000 INTL 20191213) [ 0.285060] ACPI: Interpreter enabled [ 0.285132] ACPI: PM: (supports S0 S3 S4 S5) [ 0.285136] ACPI: Using IOAPIC for interrupt routing [ 0.285200] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.285205] PCI: Ignoring E820 reservations for host bridge windows [ 0.286651] ACPI: Enabled 14 GPEs in block 00 to 7F [ 0.309169] ACPI Warning: \_SB.PC00.OUA0._DSD: Return Package is too small - found 1 elements, expected 2 (20220331/nsprepkg-362) [ 0.309254] ACPI Warning: \_SB.PC00.OUA1._DSD: Return Package is too small - found 1 elements, expected 2 (20220331/nsprepkg-362) [ 0.309335] ACPI Warning: \_SB.PC00.OUA2._DSD: Return Package is too small - found 1 elements, expected 2 (20220331/nsprepkg-362) [ 0.309414] ACPI Warning: \_SB.PC00.OUA3._DSD: Return Package is too small - found 1 elements, expected 2 (20220331/nsprepkg-362) [ 0.310377] ACPI: PM: Power Resource [WRST] [ 0.323620] ACPI: PM: Power Resource [FN00] [ 0.323685] ACPI: PM: Power Resource [FN01] [ 0.323754] ACPI: PM: Power Resource [FN02] [ 0.323814] ACPI: PM: Power Resource [FN03] [ 0.323874] ACPI: PM: Power Resource [FN04] [ 0.324789] ACPI: PM: Power Resource [PIN] [ 0.325231] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) [ 0.325244] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.325375] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] [ 0.325609] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] [ 0.325614] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.327524] PCI host bridge to bus 0000:00 [ 0.327529] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.327534] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.327538] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.327543] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.327547] pci_bus 0000:00: root bus resource [mem 0x7fc00000-0xbfffffff window] [ 0.327551] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x7fffffffff window] [ 0.327555] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.327731] pci 0000:00:00.0: [8086:4538] type 00 class 0x060000 [ 0.327891] pci 0000:00:02.0: [8086:4555] type 00 class 0x030000 [ 0.327909] pci 0000:00:02.0: reg 0x10: [mem 0x6001000000-0x6001ffffff 64bit] [ 0.327921] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] [ 0.327931] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.327959] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.327963] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics [ 0.327969] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.328221] pci 0000:00:08.0: [8086:4511] type 00 class 0x088000 [ 0.328236] pci 0000:00:08.0: reg 0x10: [mem 0x600211e000-0x600211efff 64bit] [ 0.328404] pci 0000:00:14.0: [8086:4b7d] type 00 class 0x0c0330 [ 0.328431] pci 0000:00:14.0: reg 0x10: [mem 0x6002100000-0x600210ffff 64bit] [ 0.328534] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.328864] pci 0000:00:14.2: [8086:4b7f] type 00 class 0x050000 [ 0.328890] pci 0000:00:14.2: reg 0x10: [mem 0x6002114000-0x6002117fff 64bit] [ 0.328908] pci 0000:00:14.2: reg 0x18: [mem 0x600211d000-0x600211dfff 64bit] [ 0.329148] pci 0000:00:15.0: [8086:4b78] type 00 class 0x0c8000 [ 0.329222] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.329795] pci 0000:00:15.3: [8086:4b7b] type 00 class 0x0c8000 [ 0.329867] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.330364] pci 0000:00:16.0: [8086:4b70] type 00 class 0x078000 [ 0.330394] pci 0000:00:16.0: reg 0x10: [mem 0x600211a000-0x600211afff 64bit] [ 0.330498] pci 0000:00:16.0: PME# supported from D3hot [ 0.331112] pci 0000:00:17.0: [8086:4b63] type 00 class 0x010601 [ 0.331134] pci 0000:00:17.0: reg 0x10: [mem 0x7fe00000-0x7fe01fff] [ 0.331147] pci 0000:00:17.0: reg 0x14: [mem 0x7fe03000-0x7fe030ff] [ 0.331159] pci 0000:00:17.0: reg 0x18: [io 0x5090-0x5097] [ 0.331171] pci 0000:00:17.0: reg 0x1c: [io 0x5080-0x5083] [ 0.331184] pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f] [ 0.331196] pci 0000:00:17.0: reg 0x24: [mem 0x7fe02000-0x7fe027ff] [ 0.331255] pci 0000:00:17.0: PME# supported from D3hot [ 0.331984] pci 0000:00:19.0: [8086:4b4b] type 00 class 0x0c8000 [ 0.332056] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.332547] pci 0000:00:1c.0: [8086:4b38] type 01 class 0x060400 [ 0.332669] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.333413] pci 0000:00:1c.1: [8086:4b39] type 01 class 0x060400 [ 0.333533] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.334289] pci 0000:00:1c.6: [8086:4b3e] type 01 class 0x060400 [ 0.334423] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.335186] pci 0000:00:1f.0: [8086:4b00] type 00 class 0x060100 [ 0.335619] pci 0000:00:1f.3: [8086:4b58] type 00 class 0x040300 [ 0.335666] pci 0000:00:1f.3: reg 0x10: [mem 0x6002110000-0x6002113fff 64bit] [ 0.335723] pci 0000:00:1f.3: reg 0x20: [mem 0x6002000000-0x60020fffff 64bit] [ 0.335834] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.339952] pci 0000:00:1f.4: [8086:4b23] type 00 class 0x0c0500 [ 0.339984] pci 0000:00:1f.4: reg 0x10: [mem 0x6002118000-0x60021180ff 64bit] [ 0.340021] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] [ 0.340334] pci 0000:00:1f.5: [8086:4b24] type 00 class 0x0c8000 [ 0.340359] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] [ 0.340575] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 [ 0.340599] pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff] [ 0.340628] pci 0000:01:00.0: reg 0x18: [mem 0x7fd04000-0x7fd04fff 64bit] [ 0.340648] pci 0000:01:00.0: reg 0x20: [mem 0x7fd00000-0x7fd03fff 64bit] [ 0.340780] pci 0000:01:00.0: supports D1 D2 [ 0.340783] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.341020] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.341026] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.341032] pci 0000:00:1c.0: bridge window [mem 0x7fd00000-0x7fdfffff] [ 0.341121] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.341145] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.341173] pci 0000:02:00.0: reg 0x18: [mem 0x7fc04000-0x7fc04fff 64bit] [ 0.341192] pci 0000:02:00.0: reg 0x20: [mem 0x7fc00000-0x7fc03fff 64bit] [ 0.341324] pci 0000:02:00.0: supports D1 D2 [ 0.341327] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.341558] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.341564] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.341569] pci 0000:00:1c.1: bridge window [mem 0x7fc00000-0x7fcfffff] [ 0.341656] pci 0000:03:00.0: [1ac1:089a] type 00 class 0x0000ff [ 0.341689] pci 0000:03:00.0: reg 0x10: [mem 0x6000100000-0x6000103fff 64bit pref] [ 0.341710] pci 0000:03:00.0: reg 0x18: [mem 0x6000000000-0x60000fffff 64bit pref] [ 0.342073] pci 0000:00:1c.6: PCI bridge to [bus 03] [ 0.342087] pci 0000:00:1c.6: bridge window [mem 0x6000000000-0x60001fffff 64bit pref] [ 0.348336] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 0.348493] ACPI: PCI: Interrupt link LNKB configured for IRQ 1 [ 0.348646] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.348798] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 0.348966] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.349119] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.349271] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.349423] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.362451] iommu: Default domain type: Translated [ 0.362451] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.362451] EDAC MC: Ver: 3.0.0 [ 0.362451] Registered efivars operations [ 0.362451] NetLabel: Initializing [ 0.362451] NetLabel: domain hash size = 128 [ 0.362451] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.362451] NetLabel: unlabeled traffic allowed by default [ 0.362451] PCI: Using ACPI for IRQ routing [ 0.385995] PCI: pci_cache_line_size set to 64 bytes [ 0.386138] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window [ 0.386273] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.386275] e820: reserve RAM buffer [mem 0x72e22000-0x73ffffff] [ 0.386277] e820: reserve RAM buffer [mem 0x7626c000-0x77ffffff] [ 0.386278] e820: reserve RAM buffer [mem 0x78c50000-0x7bffffff] [ 0.386280] e820: reserve RAM buffer [mem 0x280400000-0x283ffffff] [ 0.386302] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.386302] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.386302] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.386302] vgaarb: loaded [ 0.386883] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.386899] hpet0: 8 comparators, 64-bit 19.200000 MHz counter [ 0.390030] clocksource: Switched to clocksource tsc-early [ 0.390205] VFS: Disk quotas dquot_6.6.0 [ 0.390224] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.390416] AppArmor: AppArmor Filesystem Enabled [ 0.390443] pnp: PnP ACPI init [ 0.390828] system 00:00: [io 0x0a00-0x0a2f] has been reserved [ 0.390838] system 00:00: [io 0x0a30-0x0a3f] has been reserved [ 0.390842] system 00:00: [io 0x0a40-0x0a4f] has been reserved [ 0.390978] ACPI: IRQ 12 override to edge, high(!) [ 0.391573] ACPI: IRQ 4 override to edge, high(!) [ 0.391580] pnp 00:03: [dma 0 disabled] [ 0.392186] ACPI: IRQ 3 override to edge, high(!) [ 0.392194] pnp 00:04: [dma 0 disabled] [ 0.392458] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.392464] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.392644] system 00:06: [io 0x1854-0x1857] has been reserved [ 0.392644] system 00:07: [mem 0xfe032000-0xfe032fff] has been reserved [ 0.392644] system 00:07: [mem 0xfe033000-0xfe033fff] has been reserved [ 0.393167] system 00:08: [mem 0xfec80000-0xfecfffff] has been reserved [ 0.393175] system 00:08: [mem 0xfeda0000-0xfeda0fff] has been reserved [ 0.393179] system 00:08: [mem 0xfeda1000-0xfeda1fff] has been reserved [ 0.393183] system 00:08: [mem 0xc0000000-0xcfffffff] has been reserved [ 0.393187] system 00:08: [mem 0xfed20000-0xfed7ffff] could not be reserved [ 0.393191] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.393195] system 00:08: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.393198] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.394822] system 00:09: [io 0x1800-0x18fe] could not be reserved [ 0.394830] system 00:09: [mem 0xfd000000-0xfd68ffff] has been reserved [ 0.394835] system 00:09: [mem 0xfd6f0000-0xfdffffff] has been reserved [ 0.394838] system 00:09: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.394842] system 00:09: [mem 0xfe200000-0xfe7fffff] has been reserved [ 0.394846] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 0.394850] system 00:09: [mem 0xfd6b0000-0xfd6cffff] could not be reserved [ 0.395301] system 00:0a: [io 0x2000-0x20fe] has been reserved [ 0.395660] system 00:0b: [mem 0xfd6e0000-0xfd6effff] has been reserved [ 0.396816] pnp: PnP ACPI: found 13 devices [ 0.403209] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.403319] NET: Registered PF_INET protocol family [ 0.403530] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.406419] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.406474] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.406576] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.407009] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.407251] TCP: Hash tables configured (established 65536 bind 65536) [ 0.407374] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.407431] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.407472] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.407535] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.407547] NET: Registered PF_XDP protocol family [ 0.407575] pci 0000:00:15.0: BAR 0: assigned [mem 0x4010000000-0x4010000fff 64bit] [ 0.407639] pci 0000:00:15.3: BAR 0: assigned [mem 0x4010001000-0x4010001fff 64bit] [ 0.407697] pci 0000:00:19.0: BAR 0: assigned [mem 0x4010002000-0x4010002fff 64bit] [ 0.407755] pci 0000:00:1f.5: BAR 0: assigned [mem 0x7fe04000-0x7fe04fff] [ 0.407771] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.407776] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.407783] pci 0000:00:1c.0: bridge window [mem 0x7fd00000-0x7fdfffff] [ 0.407794] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.407798] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.407805] pci 0000:00:1c.1: bridge window [mem 0x7fc00000-0x7fcfffff] [ 0.407815] pci 0000:00:1c.6: PCI bridge to [bus 03] [ 0.407824] pci 0000:00:1c.6: bridge window [mem 0x6000000000-0x60001fffff 64bit pref] [ 0.407834] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.407838] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.407841] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.407845] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000fffff window] [ 0.407848] pci_bus 0000:00: resource 8 [mem 0x7fc00000-0xbfffffff window] [ 0.407852] pci_bus 0000:00: resource 9 [mem 0x4000000000-0x7fffffffff window] [ 0.407856] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.407859] pci_bus 0000:01: resource 1 [mem 0x7fd00000-0x7fdfffff] [ 0.407863] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.407866] pci_bus 0000:02: resource 1 [mem 0x7fc00000-0x7fcfffff] [ 0.407869] pci_bus 0000:03: resource 2 [mem 0x6000000000-0x60001fffff 64bit pref] [ 0.408564] PCI: CLS 0 bytes, default 64 [ 0.408583] DMAR: ACPI device "80864BB4:00" under DMAR at fed91000 as 00:1d.3 [ 0.408590] DMAR: ACPI device "80864BB5:00" under DMAR at fed91000 as 00:1d.4 [ 0.408596] DMAR: ACPI device "80864BB6:00" under DMAR at fed91000 as 00:1d.5 [ 0.408610] DMAR: No ATSR found [ 0.408613] DMAR: No SATC found [ 0.408615] DMAR: IOMMU feature fl1gp_support inconsistent [ 0.408617] DMAR: IOMMU feature pgsel_inv inconsistent [ 0.408620] DMAR: IOMMU feature nwfs inconsistent [ 0.408622] DMAR: IOMMU feature pds inconsistent [ 0.408624] DMAR: IOMMU feature eafs inconsistent [ 0.408627] DMAR: IOMMU feature prs inconsistent [ 0.408629] DMAR: IOMMU feature nest inconsistent [ 0.408631] DMAR: IOMMU feature mts inconsistent [ 0.408633] DMAR: IOMMU feature sc_support inconsistent [ 0.408635] DMAR: IOMMU feature dev_iotlb_support inconsistent [ 0.408638] DMAR: dmar0: Using Queued invalidation [ 0.408646] DMAR: dmar1: Using Queued invalidation [ 0.408661] Trying to unpack rootfs image as initramfs... [ 0.408842] pci 0000:00:02.0: Adding to iommu group 0 [ 0.408909] pci 0000:00:00.0: Adding to iommu group 1 [ 0.408936] pci 0000:00:08.0: Adding to iommu group 2 [ 0.408977] pci 0000:00:14.0: Adding to iommu group 3 [ 0.408991] pci 0000:00:14.2: Adding to iommu group 3 [ 0.409014] pci 0000:00:15.0: Adding to iommu group 4 [ 0.409027] pci 0000:00:15.3: Adding to iommu group 4 [ 0.409044] pci 0000:00:16.0: Adding to iommu group 5 [ 0.409058] pci 0000:00:17.0: Adding to iommu group 6 [ 0.409076] pci 0000:00:19.0: Adding to iommu group 7 [ 0.409094] pci 0000:00:1c.0: Adding to iommu group 8 [ 0.409112] pci 0000:00:1c.1: Adding to iommu group 9 [ 0.409135] pci 0000:00:1c.6: Adding to iommu group 10 [ 0.409166] pci 0000:00:1f.0: Adding to iommu group 11 [ 0.409180] pci 0000:00:1f.3: Adding to iommu group 11 [ 0.409195] pci 0000:00:1f.4: Adding to iommu group 11 [ 0.409209] pci 0000:00:1f.5: Adding to iommu group 11 [ 0.409228] pci 0000:01:00.0: Adding to iommu group 12 [ 0.409250] pci 0000:02:00.0: Adding to iommu group 13 [ 0.409271] pci 0000:03:00.0: Adding to iommu group 14 [ 0.410671] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 0.410681] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.410684] software IO TLB: mapped [mem 0x000000006b71c000-0x000000006f71c000] (64MB) [ 0.410770] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bec8342, max_idle_ns: 881590769617 ns [ 0.410805] clocksource: Switched to clocksource tsc [ 0.410889] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.421619] Initialise system trusted keyrings [ 0.421641] Key type blacklist registered [ 0.421690] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.423471] zbud: loaded [ 0.423741] integrity: Platform Keyring initialized [ 0.423748] integrity: Machine keyring initialized [ 0.423751] Key type asymmetric registered [ 0.423754] Asymmetric key parser 'x509' registered [ 1.352372] Freeing initrd memory: 51700K [ 1.357978] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.358021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.358067] io scheduler mq-deadline registered [ 1.360147] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.360437] Monitor-Mwait will be used to enter C-1 state [ 1.360447] Monitor-Mwait will be used to enter C-2 state [ 1.360453] Monitor-Mwait will be used to enter C-3 state [ 1.360458] ACPI: \_SB_.PR00: Found 3 idle states [ 1.361575] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.361581] ACPI: thermal: Thermal Zone [TZ00] (0 C) [ 1.361848] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.362240] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.364895] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.367615] Linux agpgart interface v0.103 [ 1.373296] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.373811] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.657244] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.657489] mousedev: PS/2 mouse device common for all mice [ 1.657566] rtc_cmos rtc_cmos: RTC can wake from S4 [ 1.658492] rtc_cmos rtc_cmos: registered as rtc0 [ 1.658679] rtc_cmos rtc_cmos: setting system clock to 2023-11-20T21:01:09 UTC (1700514069) [ 1.658716] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram [ 1.658931] intel_pstate: Intel P-state driver initializing [ 1.659332] intel_pstate: HWP enabled [ 1.659556] ledtrig-cpu: registered to indicate activity on CPUs [ 1.660515] efifb: probing for efifb [ 1.660546] efifb: framebuffer at 0x4000000000, using 1216k, total 1216k [ 1.660556] efifb: mode is 640x480x32, linelength=2560, pages=1 [ 1.660565] efifb: scrolling: redraw [ 1.660569] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.661749] Console: switching to colour frame buffer device 80x30 [ 1.662703] fb0: EFI VGA frame buffer device [ 1.693837] NET: Registered PF_INET6 protocol family [ 1.704387] Segment Routing with IPv6 [ 1.704451] In-situ OAM (IOAM) with IPv6 [ 1.704549] mip6: Mobile IPv6 [ 1.705286] NET: Registered PF_PACKET protocol family [ 1.706257] mpls_gso: MPLS GSO support [ 1.707762] microcode: sig=0x90661, pf=0x1, revision=0x17 [ 1.708547] microcode: Microcode Update Driver: v2.2. [ 1.708729] resctrl: L2 allocation detected [ 1.710077] IPI shorthand broadcast: enabled [ 1.710780] sched_clock: Marking stable (1708385632, 1021792)->(1711324684, -1917260) [ 1.712509] registered taskstats version 1 [ 1.713176] Loading compiled-in X.509 certificates [ 1.761556] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 1.762140] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 1.763554] zswap: loaded using pool lzo/zbud [ 1.764186] Key type .fscrypt registered [ 1.764469] Key type fscrypt-provisioning registered [ 1.770425] Key type encrypted registered [ 1.770788] AppArmor: AppArmor sha1 policy hashing enabled [ 1.771576] integrity: Loading X.509 certificate: UEFI:db [ 1.771904] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 1.772451] integrity: Loading X.509 certificate: UEFI:db [ 1.772756] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 1.774523] ima: Allocated hash algorithm: sha256 [ 1.812185] ima: No architecture policies found [ 1.812906] evm: Initialising EVM extended attributes: [ 1.813581] evm: security.selinux [ 1.814235] evm: security.SMACK64 (disabled) [ 1.814881] evm: security.SMACK64EXEC (disabled) [ 1.815519] evm: security.SMACK64TRANSMUTE (disabled) [ 1.816151] evm: security.SMACK64MMAP (disabled) [ 1.816694] evm: security.apparmor [ 1.817057] evm: security.ima [ 1.817411] evm: security.capability [ 1.817755] evm: HMAC attrs: 0x1 [ 1.999277] Freeing unused decrypted memory: 2036K [ 2.000277] Freeing unused kernel image (initmem) memory: 2768K [ 2.013118] Write protecting the kernel read-only data: 26624k [ 2.014304] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 2.015057] Freeing unused kernel image (rodata/data gap) memory: 1856K [ 2.033484] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.033727] Run /init as init process [ 2.033959] with arguments: [ 2.033961] /init [ 2.033962] with environment: [ 2.033963] HOME=/ [ 2.033964] TERM=linux [ 2.033965] BOOT_IMAGE=/boot/vmlinuz-6.1.0-0.deb11.6-amd64 [ 2.164791] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006) [ 2.165682] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 2.169271] ACPI: bus type USB registered [ 2.169564] usbcore: registered new interface driver usbfs [ 2.169820] usbcore: registered new interface driver hub [ 2.170076] usbcore: registered new device driver usb [ 2.171738] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 2.172084] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 2.175045] i2c i2c-0: 1/2 memory slots populated (from DMI) [ 2.175483] SCSI subsystem initialized [ 2.202910] r8169 0000:01:00.0: enabling device (0000 -> 0003) [ 2.203363] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.204102] intel-lpss 0000:00:15.3: enabling device (0004 -> 0006) [ 2.205104] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.205939] idma64 idma64.1: Found Intel integrated DMA 64-bit [ 2.206737] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 2.210159] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 [ 2.211218] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.211522] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.212106] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed [ 2.212469] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 2.213101] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.213729] usb usb1: Product: xHCI Host Controller [ 2.214054] usb usb1: Manufacturer: Linux 6.1.0-0.deb11.6-amd64 xhci-hcd [ 2.214381] usb usb1: SerialNumber: 0000:00:14.0 [ 2.215116] hub 1-0:1.0: USB hub found [ 2.215540] hub 1-0:1.0: 10 ports detected [ 2.220184] r8169 0000:01:00.0 eth0: RTL8168h/8111h, 04:2b:58:05:00:09, XID 541, IRQ 126 [ 2.220870] r8169 0000:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 2.221601] r8169 0000:02:00.0: enabling device (0000 -> 0003) [ 2.222204] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.225508] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 2.225744] libata version 3.00 loaded. [ 2.226226] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.226933] usb usb2: Product: xHCI Host Controller [ 2.227290] usb usb2: Manufacturer: Linux 6.1.0-0.deb11.6-amd64 xhci-hcd [ 2.227660] usb usb2: SerialNumber: 0000:00:14.0 [ 2.228197] hub 2-0:1.0: USB hub found [ 2.228561] hub 2-0:1.0: 4 ports detected [ 2.234756] ahci 0000:00:17.0: version 3.0 [ 2.235072] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.235760] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds [ 2.236845] scsi host0: ahci [ 2.237408] scsi host1: ahci [ 2.237812] ata1: SATA max UDMA/133 abar m2048@0x7fe02000 port 0x7fe02100 irq 127 [ 2.238478] ata2: SATA max UDMA/133 abar m2048@0x7fe02000 port 0x7fe02180 irq 127 [ 2.239542] intel-lpss 0000:00:19.0: enabling device (0004 -> 0006) [ 2.240293] idma64 idma64.2: Found Intel integrated DMA 64-bit [ 2.240316] r8169 0000:02:00.0 eth1: RTL8168h/8111h, 04:2b:58:05:00:07, XID 541, IRQ 128 [ 2.241353] r8169 0000:02:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko] [ 2.489032] usb 1-1: new full-speed USB device number 2 using xhci_hcd [ 2.552245] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.553305] ata1.00: ATA-11: IT128-P130 2280, SBFQJ1.3, max UDMA/133 [ 2.554293] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.555902] ata1.00: configured for UDMA/133 [ 2.557045] scsi 0:0:0:0: Direct-Access ATA IT128-P130 2280 J1.3 PQ: 0 ANSI: 5 [ 2.558645] ata2: SATA link down (SStatus 4 SControl 300) [ 2.594695] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.595414] sd 0:0:0:0: [sda] Write Protect is off [ 2.595766] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.595807] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.596530] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.623822] sda: sda1 sda2 [ 2.624979] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.642579] usb 1-1: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00 [ 2.644188] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.645041] usb 1-1: Product: Sonoff Zigbee 3.0 USB Dongle Plus [ 2.645874] usb 1-1: Manufacturer: Silicon Labs [ 2.646681] usb 1-1: SerialNumber: 0001 [ 2.776968] usb 1-3: new low-speed USB device number 3 using xhci_hcd [ 2.788758] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none. [ 2.835674] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 2.926328] systemd[1]: Inserted module 'autofs4' [ 2.944170] usb 1-3: New USB device found, idVendor=04d9, idProduct=1603, bcdDevice= 3.10 [ 2.944825] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.945150] usb 1-3: Product: USB Keyboard [ 2.945461] usb 1-3: Manufacturer: [ 2.975487] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 2.976893] systemd[1]: Detected architecture x86-64. [ 3.037590] systemd[1]: Set hostname to <DietPi>. [ 3.073011] usb 1-4: new full-speed USB device number 4 using xhci_hcd [ 3.199979] systemd[1]: Queued start job for default target Graphical Interface. [ 3.224324] usb 1-4: New USB device found, idVendor=04fa, idProduct=2490, bcdDevice= 0.02 [ 3.225833] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.243306] systemd[1]: Created slice system-getty.slice. [ 3.244711] systemd[1]: Created slice system-modprobe.slice. [ 3.246024] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.247310] systemd[1]: Created slice User and Session Slice. [ 3.248118] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 3.249289] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.250564] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.251700] systemd[1]: Reached target Local Encrypted Volumes. [ 3.252488] systemd[1]: Reached target Paths. [ 3.253249] systemd[1]: Reached target Remote File Systems. [ 3.254005] systemd[1]: Reached target Slices. [ 3.254777] systemd[1]: Reached target Swap. [ 3.255687] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.256489] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.257477] systemd[1]: Listening on Journal Audit Socket. [ 3.258340] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.259209] systemd[1]: Listening on Journal Socket. [ 3.260510] systemd[1]: Listening on udev Control Socket. [ 3.261359] systemd[1]: Listening on udev Kernel Socket. [ 3.263493] systemd[1]: Mounting Huge Pages File System... [ 3.265664] systemd[1]: Mounting POSIX Message Queue File System... [ 3.267875] systemd[1]: Mounting Kernel Debug File System... [ 3.270164] systemd[1]: Mounting Kernel Trace File System... [ 3.272715] systemd[1]: Starting Restore / save the current clock... [ 3.274925] systemd[1]: Starting Set the console keyboard layout... [ 3.277277] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 3.279969] systemd[1]: Starting Load Kernel Module configfs... [ 3.282652] systemd[1]: Starting Load Kernel Module drm... [ 3.285242] systemd[1]: Starting Load Kernel Module fuse... [ 3.287467] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 3.288223] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 3.291559] systemd[1]: Starting Journal Service... [ 3.297643] systemd[1]: Starting Load Kernel Modules... [ 3.299836] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.302096] systemd[1]: Starting Coldplug All udev Devices... [ 3.305456] systemd[1]: Mounted Huge Pages File System. [ 3.306358] systemd[1]: Mounted POSIX Message Queue File System. [ 3.307233] systemd[1]: Mounted Kernel Debug File System. [ 3.308091] systemd[1]: Mounted Kernel Trace File System. [ 3.309720] systemd[1]: Finished Restore / save the current clock. [ 3.311401] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 3.312830] systemd[1]: modprobe@configfs.service: Succeeded. [ 3.313725] systemd[1]: Finished Load Kernel Module configfs. [ 3.315442] systemd[1]: Finished Load Kernel Modules. [ 3.317910] systemd[1]: Mounting Kernel Configuration File System... [ 3.323122] systemd[1]: Starting Apply Kernel Variables... [ 3.326648] systemd[1]: Mounted Kernel Configuration File System. [ 3.329330] fuse: init (API version 7.37) [ 3.331186] EXT4-fs (sda2): re-mounted. Quota mode: none. [ 3.333127] systemd[1]: modprobe@fuse.service: Succeeded. [ 3.334070] systemd[1]: Finished Load Kernel Module fuse. [ 3.335712] systemd[1]: Finished Remount Root and Kernel File Systems. [ 3.338521] systemd[1]: Mounting FUSE Control File System... [ 3.341163] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 3.341946] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 3.344171] systemd[1]: Starting Load/Save Random Seed... [ 3.346554] systemd[1]: Starting Create System Users... [ 3.348774] systemd[1]: Mounted FUSE Control File System. [ 3.354010] systemd[1]: Finished Apply Kernel Variables. [ 3.356992] usb 1-6: new full-speed USB device number 5 using xhci_hcd [ 3.361687] ACPI: bus type drm_connector registered [ 3.364412] systemd[1]: modprobe@drm.service: Succeeded. [ 3.365084] systemd[1]: Finished Load Kernel Module drm. [ 3.371370] systemd[1]: Finished Load/Save Random Seed. [ 3.371918] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 3.374194] systemd[1]: Finished Create System Users. [ 3.376097] systemd[1]: Starting Create Static Device Nodes in /dev... [ 3.391220] systemd[1]: Finished Create Static Device Nodes in /dev. [ 3.393742] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 3.413737] systemd[1]: Finished Set the console keyboard layout. [ 3.414312] systemd[1]: Reached target Local File Systems (Pre). [ 3.416350] systemd[1]: Mounting /tmp... [ 3.418596] systemd[1]: Mounting /var/log... [ 3.420580] systemd[1]: Mounted /tmp. [ 3.424771] systemd[1]: Mounted /var/log. [ 3.425391] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 3.426322] systemd[1]: Started Journal Service. [ 3.443964] systemd-journald[236]: Received client request to flush runtime journal. [ 3.488058] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 3.488100] ACPI: button: Sleep Button [SLPB] [ 3.488161] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 3.489970] ACPI: button: Power Button [PWRB] [ 3.494928] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 3.499568] resource sanity check: requesting [mem 0xfdfff75c-0xfe00175b], which spans more than pnp 00:09 [mem 0xfd6f0000-0xfdffffff] [ 3.499577] caller pmc_core_probe+0xa6/0x680 [intel_pmc_core] mapping multiple BARs [ 3.499594] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform [ 3.500665] intel_pmc_core INT33A1:00: initialized [ 3.506112] usb 1-6: New USB device found, idVendor=1a86, idProduct=e2e3, bcdDevice= 0.00 [ 3.506121] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.506124] usb 1-6: Product: USB2IIC_CTP_CONTROL [ 3.506126] usb 1-6: Manufacturer: wch.cn [ 3.514386] ACPI: button: Power Button [PWRF] [ 3.530379] ACPI: AC: AC Adapter [ADP1] (on-line) [ 3.625834] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.637862] iTCO_vendor_support: vendor-support=0 [ 3.638889] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 3.639130] usbcore: registered new interface driver usbserial_generic [ 3.639144] usbserial: USB Serial support registered for generic [ 3.648150] pstore: Using crash dump compression: deflate [ 3.650668] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 3.661083] pstore: Registered efi as persistent store backend [ 3.663138] usbcore: registered new interface driver cp210x [ 3.663161] usbserial: USB Serial support registered for cp210x [ 3.663190] cp210x 1-1:1.0: cp210x converter detected [ 3.663809] hid: raw HID events driver (C) Jiri Kosina [ 3.670329] usb 1-1: cp210x converter now attached to ttyUSB0 [ 3.713945] iTCO_wdt iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 3.715304] cryptd: max_cpu_qlen set to 1000 [ 3.756003] usbcore: registered new interface driver usbhid [ 3.756008] usbhid: USB HID core driver [ 3.797163] SSE version of gcm_enc/dec engaged. [ 3.824355] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:04D9:1603.0001/input/input5 [ 3.850224] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 3.881454] hid-generic 0003:04D9:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:14.0-3/input0 [ 3.881672] input: USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:04D9:1603.0002/input/input6 [ 3.993029] input: USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:04D9:1603.0002/input/input7 [ 3.995936] hid-generic 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:14.0-3/input1 [ 3.997472] input: wch.cn USB2IIC_CTP_CONTROL Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1A86:E2E3.0003/input/input8 [ 4.044309] input: wch.cn USB2IIC_CTP_CONTROL as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1A86:E2E3.0003/input/input9 [ 4.044487] hid-generic 0003:1A86:E2E3.0003: input,hiddev0,hidraw2: USB HID v1.00 Device [wch.cn USB2IIC_CTP_CONTROL] on usb-0000:00:14.0-6/input0 [ 4.271576] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 4.272344] Console: switching to colour dummy device 80x25 [ 4.273558] i915 0000:00:02.0: vgaarb: deactivate vga console [ 4.273673] i915 0000:00:02.0: [drm] Using Transparent Hugepages [ 4.282457] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 4.283385] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 4.415026] input: wch.cn USB2IIC_CTP_CONTROL as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1A86:E2E3.0003/input/input10 [ 4.415301] input: wch.cn USB2IIC_CTP_CONTROL UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1A86:E2E3.0003/input/input11 [ 4.415716] hid-multitouch 0003:1A86:E2E3.0003: input,hiddev0,hidraw2: USB HID v1.00 Device [wch.cn USB2IIC_CTP_CONTROL] on usb-0000:00:14.0-6/input0 [ 4.479181] audit: type=1400 audit(1700514072.315:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=480 comm="apparmor_parser" [ 4.482991] audit: type=1400 audit(1700514072.319:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=482 comm="apparmor_parser" [ 4.483375] audit: type=1400 audit(1700514072.319:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=481 comm="apparmor_parser" [ 4.483381] audit: type=1400 audit(1700514072.319:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=481 comm="apparmor_parser" [ 4.506418] i915 0000:00:02.0: firmware: direct-loading firmware i915/icl_dmc_ver1_09.bin [ 4.507139] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/icl_dmc_ver1_09.bin (v1.9) [ 4.544451] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ 4.545916] ACPI: video: [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS [ 4.547834] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 4.549723] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12 [ 4.550556] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.562812] intel_rapl_common: Found RAPL domain package [ 4.562818] intel_rapl_common: Found RAPL domain core [ 4.562820] intel_rapl_common: Found RAPL domain uncore [ 4.578256] fbcon: i915drmfb (fb0) is primary device [ 4.615039] Console: switching to colour frame buffer device 100x30 [ 4.632079] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 4.667951] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 4.667958] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.667961] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.667963] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 4.667965] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 4.667966] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 4.697985] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13 [ 4.698058] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14 [ 4.698113] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15 [ 4.698164] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16 [ 4.698219] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 4.868243] audit: type=1400 audit(1700514072.703:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="hassio-supervisor" pid=581 comm="apparmor_parser" [ 4.868253] audit: type=1400 audit(1700514072.703:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="hassio-supervisor///usr/bin/gdbus" pid=581 comm="apparmor_parser" [ 4.868258] audit: type=1400 audit(1700514072.703:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="hassio-supervisor///usr/bin/git" pid=581 comm="apparmor_parser" [ 4.878193] intel_pstate: Turbo disabled by BIOS or unavailable on processor [ 5.147884] r8169 0000:01:00.0: firmware: direct-loading firmware rtl_nic/rtl8168h-2.fw [ 5.173110] Generic FE-GE Realtek PHY r8169-0-100:00: attached PHY driver (mii_bus:phy_addr=r8169-0-100:00, irq=MAC) [ 5.369057] r8169 0000:01:00.0 eth0: Link is Down [ 5.401124] Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC) [ 5.593205] r8169 0000:02:00.0 eth1: Link is Down [ 8.571725] r8169 0000:01:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 8.571742] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.241760] audit: type=1400 audit(1700514080.079:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=874 comm="apparmor_parser" [ 12.715583] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 12.721087] Bridge firewalling registered [ 12.949541] Initializing XFRM netlink socket [ 13.598572] hassio: port 1(veth9af52d7) entered blocking state [ 13.598582] hassio: port 1(veth9af52d7) entered disabled state [ 13.598870] device veth9af52d7 entered promiscuous mode [ 13.600642] hassio: port 1(veth9af52d7) entered blocking state [ 13.600651] hassio: port 1(veth9af52d7) entered forwarding state [ 13.600709] IPv6: ADDRCONF(NETDEV_CHANGE): hassio: link becomes ready [ 13.601035] hassio: port 1(veth9af52d7) entered disabled state [ 14.004036] eth0: renamed from vethbcfaed1 [ 14.029370] IPv6: ADDRCONF(NETDEV_CHANGE): veth9af52d7: link becomes ready [ 14.029414] hassio: port 1(veth9af52d7) entered blocking state [ 14.029419] hassio: port 1(veth9af52d7) entered forwarding state [ 14.408568] docker0: port 1(veth3497c4d) entered blocking state [ 14.408577] docker0: port 1(veth3497c4d) entered disabled state [ 14.409617] device veth3497c4d entered promiscuous mode [ 14.411558] docker0: port 1(veth3497c4d) entered blocking state [ 14.411572] docker0: port 1(veth3497c4d) entered forwarding state [ 14.411650] docker0: port 1(veth3497c4d) entered disabled state [ 14.436704] hassio: port 2(veth2ae117b) entered blocking state [ 14.436721] hassio: port 2(veth2ae117b) entered disabled state [ 14.437039] device veth2ae117b entered promiscuous mode [ 14.438020] hassio: port 2(veth2ae117b) entered blocking state [ 14.438026] hassio: port 2(veth2ae117b) entered forwarding state [ 14.653633] eth0: renamed from vethafd20c0 [ 14.689997] hassio: port 2(veth2ae117b) entered disabled state [ 14.690060] IPv6: ADDRCONF(NETDEV_CHANGE): veth3497c4d: link becomes ready [ 14.690101] docker0: port 1(veth3497c4d) entered blocking state [ 14.690105] docker0: port 1(veth3497c4d) entered forwarding state [ 14.690147] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready [ 14.744988] eth1: renamed from veth3ab972d [ 14.772069] IPv6: ADDRCONF(NETDEV_CHANGE): veth2ae117b: link becomes ready [ 14.772125] hassio: port 2(veth2ae117b) entered blocking state [ 14.772130] hassio: port 2(veth2ae117b) entered forwarding state [ 17.516349] audit: type=1400 audit(1700514085.351:10): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="hassio-supervisor" pid=1873 comm="apparmor_parser" [ 17.516360] audit: type=1400 audit(1700514085.351:11): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="hassio-supervisor///usr/bin/gdbus" pid=1873 comm="apparmor_parser" [ 17.516365] audit: type=1400 audit(1700514085.351:12): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="hassio-supervisor///usr/bin/git" pid=1873 comm="apparmor_parser" [ 17.780443] hassio: port 3(veth6360335) entered blocking state [ 17.780452] hassio: port 3(veth6360335) entered disabled state [ 17.780614] device veth6360335 entered promiscuous mode [ 18.033799] eth0: renamed from vethf1408ca [ 18.057491] IPv6: ADDRCONF(NETDEV_CHANGE): veth6360335: link becomes ready [ 18.057535] hassio: port 3(veth6360335) entered blocking state [ 18.057540] hassio: port 3(veth6360335) entered forwarding state [ 18.273237] hassio: port 4(vetha6d519f) entered blocking state [ 18.273247] hassio: port 4(vetha6d519f) entered disabled state [ 18.273382] device vetha6d519f entered promiscuous mode [ 18.273506] hassio: port 4(vetha6d519f) entered blocking state [ 18.273511] hassio: port 4(vetha6d519f) entered forwarding state [ 18.505720] eth0: renamed from veth3917cb9 [ 18.525576] IPv6: ADDRCONF(NETDEV_CHANGE): vetha6d519f: link becomes ready [ 18.739628] hassio: port 5(veth219ddcc) entered blocking state [ 18.739638] hassio: port 5(veth219ddcc) entered disabled state [ 18.740084] device veth219ddcc entered promiscuous mode [ 18.740765] hassio: port 5(veth219ddcc) entered blocking state [ 18.740773] hassio: port 5(veth219ddcc) entered forwarding state [ 18.781029] hassio: port 5(veth219ddcc) entered disabled state [ 18.969687] eth0: renamed from veth3cd3e67 [ 18.993473] IPv6: ADDRCONF(NETDEV_CHANGE): veth219ddcc: link becomes ready [ 18.993512] hassio: port 5(veth219ddcc) entered blocking state [ 18.993517] hassio: port 5(veth219ddcc) entered forwarding state [ 20.837849] hassio: port 6(veth13a9402) entered blocking state [ 20.837860] hassio: port 6(veth13a9402) entered disabled state [ 20.838145] device veth13a9402 entered promiscuous mode [ 21.101800] eth0: renamed from veth2852622 [ 21.125541] IPv6: ADDRCONF(NETDEV_CHANGE): veth13a9402: link becomes ready [ 21.125580] hassio: port 6(veth13a9402) entered blocking state [ 21.125585] hassio: port 6(veth13a9402) entered forwarding state [ 21.447705] hassio: port 7(veth47c4cc3) entered blocking state [ 21.447716] hassio: port 7(veth47c4cc3) entered disabled state [ 21.448035] device veth47c4cc3 entered promiscuous mode [ 21.448478] hassio: port 7(veth47c4cc3) entered blocking state [ 21.448485] hassio: port 7(veth47c4cc3) entered forwarding state [ 21.705866] eth0: renamed from veth3e2bd7c [ 21.745997] IPv6: ADDRCONF(NETDEV_CHANGE): veth47c4cc3: link becomes ready [ 22.326659] hassio: port 8(veth3ffe890) entered blocking state [ 22.326668] hassio: port 8(veth3ffe890) entered disabled state [ 22.326970] device veth3ffe890 entered promiscuous mode [ 22.730052] eth0: renamed from veth78e359f [ 22.745854] IPv6: ADDRCONF(NETDEV_CHANGE): veth3ffe890: link becomes ready [ 22.745909] hassio: port 8(veth3ffe890) entered blocking state [ 22.745915] hassio: port 8(veth3ffe890) entered forwarding state
Also lsmod | grep apex returns nothing.
lsmod | grep apex
This is not VM, it's a host pc.
Any suggestions appreciated!
Actually, gasket-dkms is open-source and support for kernel 6.4+ has been added. One can recompile gasket-dkms from the source below.
https://github.com/google/gasket-driver
Description
Hi,
I found similar issues already discussed, like here, but disabling "Secure Boot" doesn't help in my case.
dmesg:
Also
lsmod | grep apex
returns nothing.This is not VM, it's a host pc.
Any suggestions appreciated!
Click to expand!
### Operating System 6.1.0-0.deb11.6-amd64 ### Coral Device Mini PCI