I've got the Coral M.2 Accelerator B+M key, which I've gone through the install for. After some initial issues, I can get my machine (Ubuntu 22.04 server) to recognise the device via the command "lspci -nn | grep 089a", which successfully returns
"01:00.0 System peripheral [0880]: Global Unichip Corp. Coral Edge TPU [1ac1:089a]"
However, following the reboot, when I input -
"ls /dev/apex_0"
I get the response -
"ls: cannot access '/dev/apex_0': No such file or directory"
I've spent several hours reading the other posts and going through various attempts, including install/reinstalling "gasket-driver" and associated other installs. I'm still not getting anywhere and I can't get the device to load as expected.
Any other suggestions?
Output for "sudo apt-get install gasket-dkms libedgetpu1-std" as below. NB, I've disabled secure boot etc.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
libedgetpu1-std is already the newest version (16.0).
gasket-dkms is already the newest version (1.0-18).
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up gasket-dkms (1.0-18) ...
Removing old gasket-1.0 DKMS files...
Deleting module gasket-1.0 completely from the DKMS tree.
Loading new gasket-1.0 DKMS files...
Building for 5.15.0-118-generic
Building initial module for 5.15.0-118-generic
ERROR: Cannot create report: [Errno 17] File exists: '/var/crash/gasket-dkms.0.crash'
Error! Bad return status for module build on kernel: 5.15.0-118-generic (x86_64)
Consult /var/lib/dkms/gasket/1.0/build/make.log for more information.
dpkg: error processing package gasket-dkms (--configure):
installed gasket-dkms package post-installation script subprocess returned error exit status 10
Errors were encountered while processing:
gasket-dkms
E: Sub-process /usr/bin/dpkg returned an error code (1)
Click to expand!
### Issue Type
Build/Install
### Operating System
Ubuntu
### Coral Device
M.2 Accelerator B+M
### Other Devices
_No response_
### Programming Language
_No response_
### Relevant Log Output
_No response_
Description
I've got the Coral M.2 Accelerator B+M key, which I've gone through the install for. After some initial issues, I can get my machine (Ubuntu 22.04 server) to recognise the device via the command "lspci -nn | grep 089a", which successfully returns "01:00.0 System peripheral [0880]: Global Unichip Corp. Coral Edge TPU [1ac1:089a]"
However, following the reboot, when I input - "ls /dev/apex_0"
I get the response - "ls: cannot access '/dev/apex_0': No such file or directory"
I've spent several hours reading the other posts and going through various attempts, including install/reinstalling "gasket-driver" and associated other installs. I'm still not getting anywhere and I can't get the device to load as expected.
Any other suggestions?
Output for "sudo apt-get install gasket-dkms libedgetpu1-std" as below. NB, I've disabled secure boot etc.
Reading package lists... Done Building dependency tree... Done Reading state information... Done libedgetpu1-std is already the newest version (16.0). gasket-dkms is already the newest version (1.0-18). 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] y Setting up gasket-dkms (1.0-18) ... Removing old gasket-1.0 DKMS files... Deleting module gasket-1.0 completely from the DKMS tree. Loading new gasket-1.0 DKMS files... Building for 5.15.0-118-generic Building initial module for 5.15.0-118-generic ERROR: Cannot create report: [Errno 17] File exists: '/var/crash/gasket-dkms.0.crash' Error! Bad return status for module build on kernel: 5.15.0-118-generic (x86_64) Consult /var/lib/dkms/gasket/1.0/build/make.log for more information. dpkg: error processing package gasket-dkms (--configure): installed gasket-dkms package post-installation script subprocess returned error exit status 10 Errors were encountered while processing: gasket-dkms E: Sub-process /usr/bin/dpkg returned an error code (1)
Click to expand!
### Issue Type Build/Install ### Operating System Ubuntu ### Coral Device M.2 Accelerator B+M ### Other Devices _No response_ ### Programming Language _No response_ ### Relevant Log Output _No response_